bug#20433: guixsd on macbook

[rennes]

On 2016-01-29 09:46, Alex Kost wrote:
> address@hidden (2016-01-29 05:32 +0300) wrote:
>
> > hi,
> >
> > On 2016-01-22 00:13, Alex Kost wrote:
> > > address@hidden (2016-01-22 00:39 +0300) wrote:
> > >
> > > > On 2016-01-20 16:47, address@hidden wrote:
> > > > > Hi,
> > > > >
> > > > > address@hidden skribis:
> > > > >
> > > > > > I've finished installing correctly GuixSD on macbook. There are 
> > > > > > some
> > > > > > issue with touchpad.
> > > > > >
> > > > > > If anyone has problems with the keyboard when boot guixsd, fix 
> > > > > > with
> > > > > > the following commands:
> > > > > >
> > > > > > rmmod usbhid
> > > > > > rmmod usbkbd
> > > > > >
> > > > > > or use an external usb keyboard.
> > > > >
> > > > > Interesting!  We were discussing this at 
> > > > > <http://bugs.gnu.org/20433>,
> > > > > and it seems that only ‘usbkbd’ was at fault.
> > > > >
> > > > > Could you check if removing ‘usbkbd’ alone is enough?
> > > > >
> > > > > I would expect ‘usbhid’ to be required since the internal keyboard
> > > > > appears to be a USB device.
> > > > >
> > > > > Thanks,
> > > > > Ludo’.
> > > >
> > > >
> > > > Hi Ludo,
> > > >
> > > > is correct, removing 'usbkbd'.
> > > >
> > > > I only use 'rmmod usbhid' to reload the module of the internal
> > > > keyboard.
> > > >
> > > > i test configuring from the scratch the machine and it´s working:
> > > >
> > > > (operating-system
> > > >   (host-name "antelope")
> > > >   (timezone "Europe/Paris")
> > > >   (locale "en_US.UTF-8")
> > > >   (kernel-arguments '("modprobe.blacklist=usbkbd"))
> > > > .....
> > > >
> > > >
> > > > if i reconfigure:
> > > >
> > > >   sudo guix system reconfigure /path/to/configuration.scm
> > > >
> > > > is not working.
> > >
> > > Did you do "guix pull" before reconfiguring?  Support for
> > > "modprobe.blacklist" arguments was added several days ago, so you 
> > > need
> > > to have a recent guix code.
> >
> >
> > apologies for my late reply, i test run "guix pull" before
> > reconfiguring, and its don`t working.
>
> Since a system is configured from root, you also need to run "guix 
> pull"
> as root.  Did you do it, did you just run "guix pull" from your user?


Thanks Alex,

now works!.