[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Succeed installing GRUB via disk editor
From: |
Robert Siemer |
Subject: |
Succeed installing GRUB via disk editor |
Date: |
Mon, 10 Sep 2001 00:31:15 +0200 |
Hi all!
[... a notebook that can natively only boot from hard disk...]
> > As the C1VE bios is not able to boot via network (no PXE support),
> > I will try to write stage1 and stage1.5 to the disk from
> > Windows. There are some DOS utils out there which can do so.
> >
> > If I fail I will remove the disk from the C1...
I succeeded.
My steps:
-install grub on a spare disk
-pay attention to 1) stage1.5 should be for FAT
2) stage1.5 should go to the place after the mbr
3) where did you left stage2?
-stage1 is now configured to read stage1.5 from track0 (of by one
sect.)
-stage1.5 does now know how to find stage2 (partition and path)
-get the MBR of the target disk
-copy stage2 to the target disk (beware of the partition and path)
-get the MBR+stage1.5 from the spare disk (put it into an image file)
-now IMPLANT the partition table from the MBR of the target disk to
the image we just made
-copy the image to the beginning of the target disk
-pray and reboot (-:
What you need: a working network to the notebook (for file transfer).
And tools to read and write directly from/to the disk.
A hexeditor on the helper machine is good. Some fdisk-alikes ar good
for verifications.
I append my image file: it (i.e. stage1.5) will look for "/stage2" on
(hd0,0).
Bye,
Rob
- Succeed installing GRUB via disk editor,
Robert Siemer <=