bug-gnu-libiconv
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bug-gnu-libiconv] libiconv-1.14 make install error on HP-UX 11.31 (


From: Fowler,Jerry
Subject: Re: [bug-gnu-libiconv] libiconv-1.14 make install error on HP-UX 11.31 (IA64)
Date: Fri, 27 Jan 2012 20:33:00 -0600

Bruno,

Thanks for the follow up on this.  I ended up re-running configure without the 
--enable-relocatable option and that seemed to cure the problem.  I just wanted 
to report this so the bug could be closed with a resolution.  I don't know if 
this another issues but I won't be attempting to use the --enable-relocatable 
any time soon.

Jerry Fowler 
Senior Technology Architect, CernerWorks Technologies  
address@hidden | 816-201-1476 direct 
www.cerner.com

-----Original Message-----
From: Bruno Haible [mailto:address@hidden 
Sent: Thursday, December 15, 2011 6:00 PM
To: address@hidden
Cc: Fowler,Jerry
Subject: Re: [bug-gnu-libiconv] libiconv-1.14 make install error on HP-UX 11.31 
(IA64)

Hi,

Fowler,Jerry wrote:
> I installed libiconv-1.14 prior to installing gettext-0.18.1.1 and there were 
> no issues with the gmake install at that point.  I then built and installed 
> the gettext-0.18.1.1 package, in the libiconv-1.14, I issued the ./configure, 
> gmake, gmake check, and then attempted the gmake install which failed.
> ... Here is an excerpt from the gmake install command output:
> 
> cd src && gmake install prefix='/usr/local' exec_prefix='/usr/local' 
> libdir='/usr/local/lib/hpux32'
> gmake[1]: Entering directory `/cerner/d_iphtv/ocd/ots/libiconv-1.14/src'
> test `ls -ld . | sed -e 's/^d\(.........\).*/\1/'` = rwxrwxrwx || chmod 777 .
> if [ ! -d /usr/local/bin ] ; then /bin/sh ../build-aux/mkinstalldirs 
> /usr/local/bin ; fi case "hpux11.31" in \
>   hpux*) /opt/aCC/bin/cc -L/usr/local/lib/hpux32 -mt -DUNIX 
> -D_USE_BIG_FDS +O3 -I/usr/local/include `if test -n ''; then /usr/loca\
>   *) /bin/sh ../libtool --mode=link /opt/aCC/bin/cc 
> -L/usr/local/lib/hpux32 -mt -DUNIX -D_USE_BIG_FDS +O3 
> -I/usr/local/include `if \ esac
> ld: Unsatisfied symbol "relocate" in file iconv.o
> ld: Unsatisfied symbol "compute_curr_prefix" in file 
> ../srclib/libicrt.a[progreloc.o]
> ld: Unsatisfied symbol "set_relocation_prefix" in file 
> ../srclib/libicrt.a[progreloc.o]
> 3 errors.
> gmake[1]: *** [install] Error 1
> gmake[1]: Leaving directory `/cerner/d_iphtv/ocd/ots/libiconv-1.14/src'
> gmake: *** [install] Error 2

Thanks for the report. Can you try commenting out the '  hpux*) ...' line in 
src/Makefile and retry the "gmake install" command?

There is a comment in src/Makefile.in that indicates that this direct 
invocation of /opt/aCC/bin/cc is a workaround against a problem induced by the 
combination of libtool and the HP-UX linker. Maybe the problem no longer exists 
and the workaround is no longer needed?

If you still don't succeed, then leave things as is. You will have an 'iconv'
program that works; its only deficiency will be that it is not 
internationalized. Normally you can live with that.

Bruno

----------------------------------------------------------------------
CONFIDENTIALITY NOTICE This message and any included attachments are from 
Cerner Corporation and are intended only for the addressee. The information 
contained in this message is confidential and may constitute inside or 
non-public information under international, federal, or state securities laws. 
Unauthorized forwarding, printing, copying, distribution, or use of such 
information is strictly prohibited and may be unlawful. If you are not the 
addressee, please promptly delete this message and notify the sender of the 
delivery error by e-mail or you may call Cerner's corporate offices in Kansas 
City, Missouri, U.S.A at (+1) (816)221-1024.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]