bug-ddrescue
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bug-ddrescue] Help rescuing my 500GB disk


From: Scott D
Subject: Re: [Bug-ddrescue] Help rescuing my 500GB disk
Date: Sun, 17 Nov 2013 13:38:45 -0500
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.1.0

About to copy 315720 MBytes from /dev/sdc1 to /tmp/Image.img
The 315720 MB is the used area, of which only 120566 MB has been recovered with an errsize of 68529 MB , so it is not done.
rescued:   120566 MB,  errsize:  68529 MB
120566 + 68529 = 189095, what ddrescue has tried so far. Which means it still has 126625 MB to go yet for copying non-tried blocks (315720 - 189095 = 126625).
ipos:   321129 MB
The ipos shows that it is at roughly 321GB of the 500GB size of your drive, which means it is not at the end. If you were not using the domain log then ddrescue would have shown the full size of the drive for what it was "About to copy...".
That is a pretty big error size too.



On 11/17/2013 1:18 PM, Andrej Trobentar wrote:
On 11/15/2013 11:16 PM, Scott Dwyer wrote:
I am only going to answer part of your questions, ask one, and add
something.
-  will ddrescue automatically stop when it reaches the end of the
used portion of the partition (315720 MB in my case) or must I end it
with CTRL+C?
>
Ddrescue will exit when it is done doing what you told it to do,
considering all the options you provided it. The only thing the domain
file does is cause ddresuce to only make attempts at the areas specified
in the domain file (in this case the used portion of the partition). So
when it is done trying the area specified in the domain file (again,
considering all the other options provided to ddrescue), it will exit on
its own.

Well, I have now reached the 315720MB border and ddrescue didn't stop and just continues :\

"ddrescue -vvvv -n -m /tmp/domain_logfile /dev/sdc1 /tmp/Image.img /tmp/Image.log"


GNU ddrescue 1.16
About to copy 315720 MBytes from /dev/sdc1 to /tmp/Image.img
    Starting positions: infile = 0 B,  outfile = 0 B
    Copy block size: 128 sectors       Initial skip size: 128 sectors
Sector size: 512 Bytes
Max retries: 0
Direct: no    Sparse: no    Split: no    Truncate: no

Press Ctrl-C to interrupt
Initial status (read from logfile)
rescued:   120531 MB,  errsize:  68529 MB,  errors:    2804
current position:    321094 MB,     current sector: 627137298
last block size:        4096 B

Current status
rescued:   120566 MB,  errsize:  68529 MB,  current rate:     262 kB/s
   ipos:   321129 MB,   errors:    2804,    average rate:     276 kB/s
   opos:   321129 MB,     time since last successful read:       0 s
Copying non-tried blocks...


What now? :)


Greetings,

    Andrej.

_______________________________________________
Bug-ddrescue mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/bug-ddrescue





reply via email to

[Prev in Thread] Current Thread [Next in Thread]