[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie
From: |
Matt Boge |
Subject: |
Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie |
Date: |
Tue, 9 Jan 2007 08:35:28 -0800 (PST) |
Thanks Jason.
Yea, the recovery is the most important thing at this point. This is my primary
computer, so it would be nice to be up and running quickly... but from what
I've learned in the last few days, this isn't a quick process and if i want my
data back, I'll have to wait.
I guess I was more concerned with the failing drive getting worse as the
process goes along... working so hard on rescuing the errors while good data
sits there waiting to be copied. I'm afraid the drive will kick the bucket
before it gets to the good data.
My experience here is thin, so I'm not sure if this is a legitimate worry or
not. If it's the write-heads that are the culprit, then I suppose I shouldn't
worry about it as ddrescue is simply reading from the drive, right? My drive
isn't "clicking" as I've heard it described elsewhere, but the drive has always
been a little noisy when seeking and doing the nightly maintenance (i.e. virus
scans, defrag, etc....) so I'm not really sure what went wrong. Incidentally, I
purchased a new HD a few weeks ago to replace this drive because the noise was
annoying for guests that were sleeping in my computer room. Of course, before
I had a chance to swap drives, this one failed... ugh.
Anyway, I will use this time to study up a little more on HDs and they way they
store data... it's very interesting. When all of this is done, I plan to
install two Seagate SATA drives with RAID 0 (data striping) and look to
establish a regular backup routine so I won't have to go through this again.
I'm considering several options... from setting up an external drive (perhaps
one that supports network access, so I can also backup my laptop and kids'
computer) to subscribing to one of the many "online" backup services. Any
suggestions or experiences would be greatly appreciated.
Thanks again.
- Matt
----- Original Message ----
From: "DePriest, Jason R." <address@hidden>
To: Matt Boge <address@hidden>
Cc: Ariel <address@hidden>; address@hidden
Sent: Tuesday, January 9, 2007 11:04:40 AM
Subject: Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie
On 1/9/07, Matt Boge wrote:
> Yikes... I guess I spoke too soon. 12 hours ago I was encouraged by the
> speed pickup (ipos:38152 MiB), but now we have slowed to a crawl (ipos: 39548
> MiB).
>
I had a 20 GB drive go bad on me and it took about 72 hours to get a
full image. It didn't even have that many bad places, but it was
unbootable and unmountable (as a readable filesystem).
So, don't worry too much about the time if you time is all you have.
I had this drive sitting around for over two years before I was able
to recover anything from it.
- [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/08
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/08
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/08
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/09
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie,
Matt Boge <=
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/10
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/19
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/25
- Re: [Bug-ddrescue] ddrescue 1.3 - questions from a newbie, Matt Boge, 2007/01/26