[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Installation problem of bash 2.05.
|
From: |
hep_mkj |
|
Subject: |
Installation problem of bash 2.05. |
|
Date: |
Wed, 28 Aug 2002 21:58:55 -0500 |
Dear Sir,
I am working on Sun-Solaris7 system. I am facing problem in
installation of bash2.05. When I run the command "make test", it gave
the following error:-
-------------------------------------------------------------------------
# make tests
***********************************************************
* *
* GNU bash, version 2.05b.0(1)-release (sparc-sun-solaris2.7)
* *
***********************************************************
make[1]: Entering directory
`/appl/hadron/software/bash/bash-2.05b/lib/malloc'
cc -I. -I../.. -I../.. -I../../include -I../../lib -DHAVE_CONFIG_H
-DSHELL -g -DRCHECK -Dbotch=programming_error -c malloc.c
"malloc.c", line 904: syntax error before or at: }
"malloc.c", line 924: undefined symbol: n
"malloc.c", line 927: void function cannot return value
"malloc.c", line 930: void function cannot return value
"malloc.c", line 988: void function cannot return value
"malloc.c", line 999: void function cannot return value
"malloc.c", line 1020: void function cannot return value
"malloc.c", line 1023: syntax error before or at: static
"malloc.c", line 1034: undefined symbol: size
"malloc.c", line 1034: undefined symbol: alignment
"malloc.c", line 1034: warning: statement not reached
"malloc.c", line 1037: void function cannot return value
"malloc.c", line 1040: void function cannot return value
"malloc.c", line 1054: void function cannot return value
"malloc.c", line 1060: syntax error before or at: static
"malloc.c", line 1066: undefined symbol: size
"malloc.c", line 1066: void function cannot return value
"malloc.c", line 1071: syntax error before or at: static
"malloc.c", line 1080: undefined symbol: n
"malloc.c", line 1080: undefined symbol: s
"malloc.c", line 1080: warning: statement not reached
"malloc.c", line 1084: void function cannot return value
"malloc.c", line 1087: syntax error before or at: static
"malloc.c", line 1093: warning: statement not reached
"malloc.c", line 1114: syntax error before or at: void
"malloc.c", line 1120: undefined symbol: bytes
"malloc.c", line 1120: void function cannot return value
"malloc.c", line 1123: syntax error before or at: void
"malloc.c", line 1130: undefined symbol: ptr
"malloc.c", line 1130: undefined symbol: size
"malloc.c", line 1130: warning: improper pointer/integer combination:
arg #1
"malloc.c", line 1130: void function cannot return value
"malloc.c", line 1133: syntax error before or at: void
"malloc.c", line 1139: warning: statement not reached
"malloc.c", line 1142: syntax error before or at: void
"malloc.c", line 1149: undefined symbol: alignment
"malloc.c", line 1149: undefined symbol: size
"malloc.c", line 1149: void function cannot return value
"malloc.c", line 1153: syntax error before or at: void
"malloc.c", line 1159: undefined symbol: n
"malloc.c", line 1159: undefined symbol: s
"malloc.c", line 1159: void function cannot return value
"malloc.c", line 1162: syntax error before or at: void
"malloc.c", line 1168: warning: statement not reached
"malloc.c", line 1173: syntax error before or at: void
"malloc.c", line 1179: undefined symbol: size
"malloc.c", line 1179: void function cannot return value
"malloc.c", line 1187: syntax error before or at: void
"malloc.c", line 1191: undefined symbol: size
"malloc.c", line 1191: void function cannot return value
"malloc.c", line 1194: syntax error before or at: void
"malloc.c", line 1199: void function cannot return value
"malloc.c", line 1202: syntax error before or at: void
"malloc.c", line 1206: warning: statement not reached
"malloc.c", line 1209: syntax error before or at: void
"malloc.c", line 1214: undefined symbol: alignment
"malloc.c", line 1214: undefined symbol: size
"malloc.c", line 1214: void function cannot return value
"malloc.c", line 1218: syntax error before or at: void
"malloc.c", line 1222: undefined symbol: size
"malloc.c", line 1222: void function cannot return value
"malloc.c", line 1227: syntax error before or at: void
"malloc.c", line 1231: undefined symbol: n
"malloc.c", line 1231: undefined symbol: s
"malloc.c", line 1231: void function cannot return value
"malloc.c", line 1234: syntax error before or at: void
"malloc.c", line 1238: warning: statement not reached
"malloc.c", line 1241: syntax error before or at: <EOF>
"malloc.c", line 1241: warning: static function called but not defined:
internal_valloc()
"malloc.c", line 1241: warning: static function called but not defined:
internal_cfree()
"malloc.c", line 1241: warning: static function called but not defined:
internal_calloc()
"malloc.c", line 1241: warning: static function called but not defined:
internal_memalign()
"malloc.c", line 1241: warning: static function called but not defined:
internal_realloc()
cc: acomp failed for malloc.c
make[1]: *** [malloc.o] Error 2
make[1]: Leaving directory
`/appl/hadron/software/bash/bash-2.05b/lib/malloc'
make: *** [lib/malloc/libmalloc.a] Error 1
#
-------------------------------------------------------------------------
I am also enclosing the output of command "bashversion -l" and
attachement 'config.h' file.
-------------------------------------------------------------------------
$ cd /appl/hadron/software/bash/bash-2.05b
$ bashversion -l
GNU bash, version 2.05b.0(1)-release (sparc-sun-solaris2.7)
$
-------------------------------------------------------------------------
Should I ignore the above error or proceed with the installation.
Please help in this regard.
Thanking you in anticipation,
Manoj Jha.
/* config.h. Generated automatically by configure. */
/* config.h -- Configuration file for bash. */
/* Copyright (C) 1987-2002 Free Software Foundation, Inc.
This file is part of GNU Bash, the Bourne Again SHell.
Bash is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
Bash is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License
along with Bash; see the file COPYING. If not, write to the Free
Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111 USA. */
#ifndef _CONFIG_H_
#define _CONFIG_H_
/* Configuration feature settings controllable by autoconf. */
/* Define JOB_CONTROL if your operating system supports
BSD-like job control. */
#define JOB_CONTROL 1
/* Define ALIAS if you want the alias features. */
#define ALIAS 1
/* Define PUSHD_AND_POPD if you want those commands to be compiled in.
(Also the `dirs' commands.) */
#define PUSHD_AND_POPD 1
/* Define BRACE_EXPANSION if you want curly brace expansion a la Csh:
foo{a,b} -> fooa foob. Even if this is compiled in (the default) you
can turn it off at shell startup with `-nobraceexpansion', or during
shell execution with `set +o braceexpand'. */
#define BRACE_EXPANSION 1
/* Define READLINE to get the nifty/glitzy editing features.
This is on by default. You can turn it off interactively
with the -nolineediting flag. */
#define READLINE 1
/* Define BANG_HISTORY if you want to have Csh style "!" history expansion.
This is unrelated to READLINE. */
#define BANG_HISTORY 1
/* Define HISTORY if you want to have access to previously typed commands.
If both HISTORY and READLINE are defined, you can get at the commands
with line editing commands, and you can directly manipulate the history
from the command line.
If only HISTORY is defined, the `fc' and `history' builtins are
available. */
#define HISTORY 1
/* Define this if you want completion that puts all alternatives into
a brace expansion shell expression. */
#if defined (BRACE_EXPANSION) && defined (READLINE)
# define BRACE_COMPLETION
#endif /* BRACE_EXPANSION */
/* Define DEFAULT_ECHO_TO_XPG if you want the echo builtin to interpret
the backslash-escape characters by default, like the XPG Single Unix
Specification V2 for echo.
This requires that V9_ECHO be defined. */
/* #undef DEFAULT_ECHO_TO_XPG */
/* Define HELP_BUILTIN if you want the `help' shell builtin and the long
documentation strings compiled into the shell. */
#define HELP_BUILTIN 1
/* Define RESTRICTED_SHELL if you want the generated shell to have the
ability to be a restricted one. The shell thus generated can become
restricted by being run with the name "rbash", or by setting the -r
flag. */
#define RESTRICTED_SHELL 1
/* Define DISABLED_BUILTINS if you want "builtin foo" to always run the
shell builtin "foo", even if it has been disabled with "enable -n foo". */
/* #undef DISABLED_BUILTINS */
/* Define PROCESS_SUBSTITUTION if you want the K*rn shell-like process
substitution features "<(file)". */
/* Right now, you cannot do this on machines without fully operational
FIFO support. This currently include NeXT and Alliant. */
#define PROCESS_SUBSTITUTION 1
/* Define PROMPT_STRING_DECODE if you want the backslash-escaped special
characters in PS1 and PS2 expanded. Variable expansion will still be
performed. */
#define PROMPT_STRING_DECODE 1
/* Define SELECT_COMMAND if you want the Korn-shell style `select' command:
select word in word_list; do command_list; done */
#define SELECT_COMMAND 1
/* Define COMMAND_TIMING of you want the ksh-style `time' reserved word and
the ability to time pipelines, functions, and builtins. */
#define COMMAND_TIMING 1
/* Define ARRAY_VARS if you want ksh-style one-dimensional array variables. */
#define ARRAY_VARS 1
/* Define DPAREN_ARITHMETIC if you want the ksh-style ((...)) arithmetic
evaluation command. */
#define DPAREN_ARITHMETIC 1
/* Define EXTENDED_GLOB if you want the ksh-style [*+@?!](patlist) extended
pattern matching. */
#define EXTENDED_GLOB 1
/* Define COND_COMMAND if you want the ksh-style [[...]] conditional
command. */
#define COND_COMMAND 1
/* Define ARITH_FOR_COMMAND if you want the ksh93-style
for (( init; test; step )) do list; done
arithmetic for command. */
#define ARITH_FOR_COMMAND 1
/* Define NETWORK_REDIRECTIONS if you want /dev/(tcp|udp)/host/port to open
socket connections when used in redirections */
#define NETWORK_REDIRECTIONS 1
/* Define PROGRAMMABLE_COMPLETION for the programmable completion features
and the complete builtin. */
#define PROGRAMMABLE_COMPLETION 1
/* Define MEMSCRAMBLE if you want the bash malloc and free to scramble
memory contents on malloc() and free(). */
#define MEMSCRAMBLE 1
/* Define AFS if you are using Transarc's AFS. */
/* #undef AFS */
/* End of configuration settings controllable by autoconf. */
/* Other settable options appear in config-top.h. */
#include "config-top.h"
/* Beginning of autoconf additions. */
/* Characteristics of the C compiler */
/* #undef const */
#define inline
/* Define if cpp supports the ANSI-C stringizing `#' operator */
#define HAVE_STRINGIZE 1
/* Define if the compiler supports `long double' variables. */
#define HAVE_LONG_DOUBLE 1
#define PROTOTYPES 1
/* #undef __CHAR_UNSIGNED__ */
/* Define if the compiler supports `long long' variables. */
#define HAVE_LONG_LONG 1
#define HAVE_UNSIGNED_LONG_LONG 1
/* The number of bytes in a int. */
#define SIZEOF_INT 4
/* The number of bytes in a long. */
#define SIZEOF_LONG 4
/* The number of bytes in a pointer to char. */
#define SIZEOF_CHAR_P 4
/* The number of bytes in a double (hopefully 8). */
#define SIZEOF_DOUBLE 8
/* The number of bytes in a `long long', if we have one. */
#define SIZEOF_LONG_LONG 8
/* System paths */
#define DEFAULT_MAIL_DIRECTORY "/var/mail"
/* Characteristics of the system's header files and libraries that affect
the compilation environment. */
/* Define if the system does not provide POSIX.1 features except
with this defined. */
/* #undef _POSIX_1_SOURCE */
/* Define if you need to in order for stat and other things to work. */
/* #undef _POSIX_SOURCE */
/* Define to use GNU libc extensions */
#define _GNU_SOURCE 1
/* Define if you have the ANSI C header files. */
#define STDC_HEADERS 1
/* Memory management functions. */
/* Define if using the bash version of malloc in lib/malloc/malloc.c */
#define USING_BASH_MALLOC 1
/* #undef DISABLE_MALLOC_WRAPPERS */
/* Define if using alloca.c. */
/* #undef C_ALLOCA */
/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
This function is required for alloca.c support on those systems. */
/* #undef CRAY_STACKSEG_END */
/* Define if you have alloca, as a function or macro. */
#define HAVE_ALLOCA 1
/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
#define HAVE_ALLOCA_H 1
/* SYSTEM TYPES */
/* Define to `long' if <sys/types.h> doesn't define. */
/* #undef off_t */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef mode_t */
/* Define to `int' if <signal.h> doesn't define. */
/* #undef sigset_t */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef pid_t */
/* Define to `short' if <sys/types.h> doesn't define. */
#define bits16_t short
/* Define to `unsigned short' if <sys/types.h> doesn't define. */
#define u_bits16_t unsigned short
/* Define to `int' if <sys/types.h> doesn't define. */
#define bits32_t int
/* Define to `unsigned int' if <sys/types.h> doesn't define. */
#define u_bits32_t unsigned int
/* Define to `double' if <sys/types.h> doesn't define. */
#define bits64_t double
/* Define to `unsigned int' if <sys/types.h> doesn't define. */
/* #undef u_int */
/* Define to `unsigned long' if <sys/types.h> doesn't define. */
/* #undef u_long */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef ptrdiff_t */
/* Define to `unsigned' if <sys/types.h> doesn't define. */
/* #undef size_t */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef ssize_t */
/* Define to `long' if <stdint.h> doesn't define. */
/* #undef intmax_t */
/* Define to `unsigned long' if <stdint.h> doesn't define. */
/* #undef uintmax_t */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef uid_t */
/* Define to `long' if <sys/types.h> doesn't define. */
/* #undef clock_t */
/* Define to `long' if <sys/types.h> doesn't define. */
/* #undef time_t */
/* Define to `int' if <sys/types.h> doesn't define. */
/* #undef gid_t */
/* Define to `unsigned int' if <sys/socket.h> doesn't define. */
/* #undef socklen_t */
/* Define if you have quad_t in <sys/types.h>. */
#define HAVE_QUAD_T 1
#define RLIMTYPE rlim_t
/* Define to the type of elements in the array set by `getgroups'.
Usually this is either `int' or `gid_t'. */
#define GETGROUPS_T gid_t
/* Characteristics of the machine archictecture. */
/* If using the C implementation of alloca, define if you know the
direction of stack growth for your system; otherwise it will be
automatically deduced at run-time.
STACK_DIRECTION > 0 => grows toward higher addresses
STACK_DIRECTION < 0 => grows toward lower addresses
STACK_DIRECTION = 0 => direction of growth unknown
*/
/* #undef STACK_DIRECTION */
/* Define if the machine architecture is big-endian. */
#define WORDS_BIGENDIAN 1
/* Check for the presence of certain non-function symbols in the system
libraries. */
/* Define if `sys_siglist' is declared by <signal.h> or <unistd.h>. */
/* #undef SYS_SIGLIST_DECLARED */
/* Define if `_sys_siglist' is declared by <signal.h> or <unistd.h>. */
#define UNDER_SYS_SIGLIST_DECLARED 1
/* #undef HAVE_SYS_SIGLIST */
#define HAVE_UNDER_SYS_SIGLIST 1
#define HAVE_SYS_ERRLIST 1
#define HAVE_TIMEVAL 1
#define HAVE_TZNAME 1
/* Characteristics of some of the system structures. */
#define STRUCT_DIRENT_HAS_D_INO 1
/* #undef STRUCT_DIRENT_HAS_D_FILENO */
/* #undef TIOCSTAT_IN_SYS_IOCTL */
/* #undef FIONREAD_IN_SYS_IOCTL */
/* #undef GWINSZ_IN_SYS_IOCTL */
/* #undef STRUCT_WINSIZE_IN_SYS_IOCTL */
/* #undef TM_IN_SYS_TIME */
#define STRUCT_WINSIZE_IN_TERMIOS 1
/* #undef SPEED_T_IN_SYS_TYPES */
/* #undef TERMIOS_LDISC */
#define TERMIO_LDISC 1
#define HAVE_STRUCT_STAT_ST_BLOCKS 1
/* #undef HAVE_STRUCT_TM_TM_ZONE */
/* #undef HAVE_TM_ZONE */
/* Characteristics of definitions in the system header files. */
#define HAVE_GETPW_DECLS 1
/* #undef HAVE_RESOURCE */
/* #undef HAVE_LIBC_FNM_EXTMATCH */
#define HAVE_DECL_CONFSTR 0
#define HAVE_DECL_PRINTF 1
#define HAVE_DECL_SBRK 1
#define HAVE_DECL_STRCPY 1
#define HAVE_DECL_STRSIGNAL 1
#define HAVE_DECL_STRTOLD 0
#define HAVE_MBSTATE_T 1
/* These are checked with BASH_CHECK_DECL */
#define HAVE_DECL_STRTOIMAX 0
#define HAVE_DECL_STRTOL 1
#define HAVE_DECL_STRTOLL 1
#define HAVE_DECL_STRTOUL 1
#define HAVE_DECL_STRTOULL 1
#define HAVE_DECL_STRTOUMAX 0
/* Characteristics of system calls and C library functions. */
/* Define if the `getpgrp' function takes no argument. */
#define GETPGRP_VOID 1
/* #undef NAMED_PIPES_MISSING */
/* #undef OPENDIR_NOT_ROBUST */
/* #undef PGRP_PIPE */
/* Define if the setvbuf function takes the buffering type as its second
argument and the buffer pointer as the third, as on System V
before release 3. */
/* #undef SETVBUF_REVERSED */
/* #undef STAT_MACROS_BROKEN */
#define ULIMIT_MAXFDS 1
#define CAN_REDEFINE_GETENV 1
#define HAVE_STD_PUTENV 1
#define HAVE_STD_UNSETENV 1
/* #undef HAVE_PRINTF_A_FORMAT */
/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
#define HAVE_LANGINFO_CODESET 1
/* Characteristics of properties exported by the kernel. */
/* Define if the kernel can exec files beginning with #! */
#define HAVE_HASH_BANG_EXEC 1
/* Define if you have the /dev/fd devices to map open files into the file
system. */
#define HAVE_DEV_FD 1
/* Defined to /dev/fd or /proc/self/fd (linux). */
#define DEV_FD_PREFIX "/dev/fd/"
/* Define if you have the /dev/stdin device. */
#define HAVE_DEV_STDIN 1
/* Type and behavior of signal handling functions. */
/* Define as the return type of signal handlers (int or void). */
#define RETSIGTYPE void
/* Define if return type of signal handlers is void */
#define VOID_SIGHANDLER 1
/* #undef MUST_REINSTALL_SIGHANDLERS */
/* #undef HAVE_BSD_SIGNALS */
#define HAVE_POSIX_SIGNALS 1
/* #undef HAVE_USG_SIGHOLD */
/* #undef UNUSABLE_RT_SIGNALS */
/* Presence of system and C library functions. */
/* Define if you have the asprintf function. */
/* #undef HAVE_ASPRINTF */
/* Define if you have the bcopy function. */
#define HAVE_BCOPY 1
/* Define if you have the bindtextdomain function. */
#define HAVE_BINDTEXTDOMAIN 1
/* Define if you have the bzero function. */
#define HAVE_BZERO 1
/* Define if you have the confstr function. */
#define HAVE_CONFSTR 1
/* Define if you have the dlclose function. */
#define HAVE_DLCLOSE 1
/* Define if you have the dlopen function. */
#define HAVE_DLOPEN 1
/* Define if you have the dlsym function. */
#define HAVE_DLSYM 1
/* Define if you don't have vprintf but do have _doprnt. */
#define HAVE_DOPRNT 1
/* Define if you have the dup2 function. */
#define HAVE_DUP2 1
/* Define if you have the getaddrinfo function. */
/* #undef HAVE_GETADDRINFO */
/* Define if you have the getcwd function. */
#define HAVE_GETCWD 1
/* Define if you have the getdtablesize function. */
#define HAVE_GETDTABLESIZE 1
/* Define if you have the getgroups function. */
#define HAVE_GETGROUPS 1
/* Define if you have the gethostbyname function. */
#define HAVE_GETHOSTBYNAME 1
/* Define if you have the gethostname function. */
#define HAVE_GETHOSTNAME 1
/* Define if you have the getpagesize function. */
#define HAVE_GETPAGESIZE 1
/* Define if you have the getpeername function. */
#define HAVE_GETPEERNAME 1
/* Define if you have the getrlimit function. */
#define HAVE_GETRLIMIT 1
/* Define if you have the getrusage function. */
#define HAVE_GETRUSAGE 1
/* Define if you have the getservbyname function. */
/* #undef HAVE_GETSERVBYNAME */
/* Define if you have the getservent function. */
/* #undef HAVE_GETSERVENT */
/* Define if you have the gettext function. */
#define HAVE_GETTEXT 1
/* Define if you have the gettimeofday function. */
#define HAVE_GETTIMEOFDAY 1
/* Define if you have the getwd function. */
/* #undef HAVE_GETWD */
/* Define if you have the inet_aton function. */
/* #undef HAVE_INET_ATON */
/* Define if you have the isascii function. */
#define HAVE_ISASCII 1
/* Define if you have the isblank function. */
/* #undef HAVE_ISBLANK */
/* Define if you have the isgraph function. */
#define HAVE_ISGRAPH 1
/* Define if you have the isint function in libc */
/* #undef HAVE_ISINF_IN_LIBC */
/* Define if you have the isprint function. */
#define HAVE_ISPRINT 1
/* Define if you have the isspace function. */
#define HAVE_ISSPACE 1
/* Define if you have the isxdigit function. */
#define HAVE_ISXDIGIT 1
/* Define if you have the killpg function. */
#define HAVE_KILLPG 1
/* Define if you have the lstat function. */
#define HAVE_LSTAT 1
/* Define if you have the mbsrtowcs function. */
#define HAVE_MBSRTOWCS 1
/* Define if you have the memmove function. */
#define HAVE_MEMMOVE 1
/* Define if you have the memset function. */
#define HAVE_MEMSET 1
/* Define if you have the mkfifo function. */
#define HAVE_MKFIFO 1
/* Define if you have the pathconf function. */
#define HAVE_PATHCONF 1
/* Define if you have the putenv function. */
#define HAVE_PUTENV 1
/* Define if you have the readlink function. */
#define HAVE_READLINK 1
/* Define if you have the rename function. */
#define HAVE_RENAME 1
/* Define if you have the sbrk function. */
#define HAVE_SBRK 1
/* Define if you have the select function. */
#define HAVE_SELECT 1
/* Define if you have the setdtablesize function. */
/* #undef HAVE_SETDTABLESIZE */
/* Define if you have the setenv function. */
/* #undef HAVE_SETENV */
/* Define if you have the setlinebuf function. */
#define HAVE_SETLINEBUF 1
/* Define if you have the setlocale function. */
#define HAVE_SETLOCALE 1
/* Define if you have the setostype function. */
/* #undef HAVE_SETOSTYPE */
/* Define if you have the setvbuf function. */
#define HAVE_SETVBUF 1
/* Define if you have the siginterrupt function. */
#define HAVE_SIGINTERRUPT 1
/* Define if you have the POSIX.1-style sigsetjmp function. */
#define HAVE_POSIX_SIGSETJMP 1
/* Define if you have the snprintf function. */
#define HAVE_SNPRINTF 1
/* Define if you have the strcasecmp function. */
#define HAVE_STRCASECMP 1
/* Define if you have the strchr function. */
#define HAVE_STRCHR 1
/* Define if you have the strcoll function. */
#define HAVE_STRCOLL 1
/* Define if you have the strerror function. */
#define HAVE_STRERROR 1
/* Define if you have the strftime function. */
#define HAVE_STRFTIME 1
/* Define if you have the strpbrk function. */
#define HAVE_STRPBRK 1
/* Define if you have the strtod function. */
#define HAVE_STRTOD 1
/* Define if you have the strtoimax function. */
/* #undef HAVE_STRTOIMAX */
/* Define if you have the strtol function. */
#define HAVE_STRTOL 1
/* Define if you have the strtoll function. */
#define HAVE_STRTOLL 1
/* Define if you have the strtoul function. */
#define HAVE_STRTOUL 1
/* Define if you have the strtoull function. */
#define HAVE_STRTOULL 1
/* Define if you have the strtoumax function. */
/* #undef HAVE_STRTOUMAX */
/* Define if you have the strsignal function or macro. */
#define HAVE_STRSIGNAL 1
/* Define if you have the sysconf function. */
#define HAVE_SYSCONF 1
/* Define if you have the tcgetattr function. */
#define HAVE_TCGETATTR 1
/* Define if you have the tcgetpgrp function. */
#define HAVE_TCGETPGRP 1
/* Define if you have the textdomain function. */
#define HAVE_TEXTDOMAIN 1
/* Define if you have the times function. */
#define HAVE_TIMES 1
/* Define if you have the ttyname function. */
#define HAVE_TTYNAME 1
/* Define if you have the tzset function. */
#define HAVE_TZSET 1
/* Define if you have the ulimit function. */
#define HAVE_ULIMIT 1
/* Define if you have the uname function. */
#define HAVE_UNAME 1
/* Define if you have the unsetenv function. */
/* #undef HAVE_UNSETENV */
/* Define if you have the vasprintf function. */
/* #undef HAVE_VASPRINTF */
/* Define if you have the vprintf function. */
#define HAVE_VPRINTF 1
/* Define if you have the vsnprintf function. */
#define HAVE_VSNPRINTF 1
/* Define if you have the waitpid function. */
#define HAVE_WAITPID 1
/* Define if you have the wait3 function. */
#define HAVE_WAIT3 1
/* Define if you have the wcwidth function. */
#define HAVE_WCWIDTH 1
/* Presence of certain system include files. */
/* Define if you have the <arpa/inet.h> header file. */
#define HAVE_ARPA_INET_H 1
/* Define if you have the <dirent.h> header file. */
#define HAVE_DIRENT_H 1
/* Define if you have the <dlfcn.h> header file. */
#define HAVE_DLFCN_H 1
/* Define if you have the <grp.h> header file. */
#define HAVE_GRP_H 1
/* Define if you have the <inttypes.h> header file. */
#define HAVE_INTTYPES_H 1
/* Define if you have the <langinfo.h> header file. */
#define HAVE_LANGINFO_H 1
/* Define if you have the <libintl.h> header file. */
#define HAVE_LIBINTL_H 1
/* Define if you have the <limits.h> header file. */
#define HAVE_LIMITS_H 1
/* Define if you have the <locale.h> header file. */
#define HAVE_LOCALE_H 1
/* Define if you have the <ndir.h> header file. */
/* #undef HAVE_NDIR_H */
/* Define if you have the <netdh.h> header file. */
#define HAVE_NETDB_H 1
/* Define if you have the <netinet/in.h> header file. */
#define HAVE_NETINET_IN_H 1
/* Define if you have the <stdlib.h> header file. */
#define HAVE_STDLIB_H 1
/* Define if you have the <stdarg.h> header file. */
#define HAVE_STDARG_H 1
/* Define if you have the <string.h> header file. */
#define HAVE_STRING_H 1
/* Define if you have the <strings.h> header file. */
#define HAVE_STRINGS_H 1
/* Define if you have the <memory.h> header file. */
#define HAVE_MEMORY_H 1
/* Define if you have the <stddef.h> header file. */
#define HAVE_STDDEF_H 1
/* Define if you have the <stdint.h> header file. */
/* #undef HAVE_STDINT_H */
/* Define if you have the <sys/dir.h> header file. */
/* #undef HAVE_SYS_DIR_H */
/* Define if you have the <sys/file.h> header file. */
#define HAVE_SYS_FILE_H 1
/* Define if you have the <sys/ndir.h> header file. */
/* #undef HAVE_SYS_NDIR_H */
/* Define if you have the <sys/param.h> header file. */
#define HAVE_SYS_PARAM_H 1
/* Define if you have the <sys/pte.h> header file. */
/* #undef HAVE_SYS_PTE_H */
/* Define if you have the <sys/ptem.h> header file. */
#define HAVE_SYS_PTEM_H 1
/* Define if you have the <sys/resource.h> header file. */
#define HAVE_SYS_RESOURCE_H 1
/* Define if you have the <sys/select.h> header file. */
#define HAVE_SYS_SELECT_H 1
/* Define if you have the <sys/socket.h> header file. */
#define HAVE_SYS_SOCKET_H 1
/* Define if you have the <sys/stream.h> header file. */
#define HAVE_SYS_STREAM_H 1
/* Define if you have <sys/time.h> */
#define HAVE_SYS_TIME_H 1
#define TIME_WITH_SYS_TIME 1
/* Define if you have <sys/times.h> */
#define HAVE_SYS_TIMES_H 1
/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
#define HAVE_SYS_WAIT_H 1
/* Define if you have the <termcap.h> header file. */
/* #undef HAVE_TERMCAP_H */
/* Define if you have the <termio.h> header file. */
#define HAVE_TERMIO_H 1
/* Define if you have the <termios.h> header file. */
#define HAVE_TERMIOS_H 1
/* Define if you have the <unistd.h> header file. */
#define HAVE_UNISTD_H 1
/* Define if you have the <varargs.h> header file. */
#define HAVE_VARARGS_H 1
/* Define if you have the <wchar.h> header file. */
#define HAVE_WCHAR_H 1
/* Define if you have the <varargs.h> header file. */
#define HAVE_WCTYPE_H 1
/* Presence of certain system libraries. */
#define HAVE_LIBDL 1
/* #undef HAVE_LIBSUN */
#define HAVE_LIBSOCKET 1
/* Define if on MINIX. */
/* #undef _MINIX */
/* Are we running SVR5 (UnixWare 7)? */
/* #undef SVR5 */
/* Are we running SVR4.2? */
/* #undef SVR4_2 */
/* Are we running some version of SVR4? */
/* #undef SVR4 */
/* Define if job control is unusable or unsupported. */
/* #undef JOB_CONTROL_MISSING */
/* Do we need to define _KERNEL to get the RLIMIT_* defines from
<sys/resource.h>? */
/* #undef RLIMIT_NEEDS_KERNEL */
/* Number of bits in a file offset, on hosts where this is settable. */
#define _FILE_OFFSET_BITS 64
/* Define for large files on AIX-style hosts. */
/* #undef _LARGE_FILES */
/* Do strcoll(3) and strcmp(3) give different results in the default locale? */
/* #undef STRCOLL_BROKEN */
/* #undef DUP2_BROKEN */
/* #undef GETCWD_BROKEN */
#include "config-bot.h"
#endif /* _CONFIG_H_ */
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- Installation problem of bash 2.05.,
hep_mkj <=