Re: [Bino-list] HW setup possible?

[tmohr]

Hello,

Thanks for that hint.  I did not think that bino could be a problem, i rather 
wanted to make sure hat the HW setup that i'd buy could actually output 3D.

I was suspicious because i also asked in the Nvidia developer forum how to 
output 3D to a TV via HDMI and did not get an answer there.

One more question, could you send me your xorg.conf as an example?

Best regards,
Torsten.

> I've also used a nVidia 8800 GTX (no quad buffer support) and it worked. I
> haven't tried such high quality video, but I can test tomorrow an report the
> results for both cards (Quadro 6000 and 8800GTX). I have used 3 cards, 8800
> GTX, Quadro 6000, and ATI FirePro 8750. All have worked with Bino.
> 
> Brandt
> 
> On Mar 20, 2012, at 8:10 PM, <address@hidden>
>  <address@hidden> wrote:
> 
> > Hello,
> > 
> >> I've used Bino with a Samsung D7000 3D TV in checkerboard and interleaved
> >> modes and it works well. I've used both Quad Buffered OpenGL stereo and
> >> manually set the TV and Bino to these modes.
> > 
> > This means that Quad Buffering is not necessary?  I am not sure if my GTX
> 580 
> > has this available, i think only the Quadro cards have Quad Buffering
> available, 
> > but i am not sure.
> > What graphics card do you use?
> > 
> >> One thing I had to do was rename the input port on the TV from "DVI" to
> "PC"
> >> using the TV settings so that post processing was disabled on the TV.
> > 
> > Thanks for your hints so far, but i'm not yet sure if my GTX 580 can output
> 1920 
> > x 2205 and then if the TV would interpret this as 3D data.
> > 
> >> Brandt
> >> On Mar 20, 2012, at 4:19 PM, Martin Lambers wrote:
> >> 
> >>> Hi Torsten,
> >>> 
> >>> On Mon, 19 Mar 2012 21:29:00 +0100, Torsten Mohr wrote:
> >>>> before buying a 3D TV i'd like to make sure that i can use it with bino
> /
> >> 
> >>>> Linux, it would be great if you could give me some hints here.
> >>>> 
> >>>> I have a GTX580 in my Linux PC, i'd like to buy a 3D TV (looking at
> >> Samsung at 
> >>>> the moment) and connect it to the PC via HDMI.
> >>>> 
> >>>> Will i then see the TV as an own display of size 1920 x 2205 ?
> >>>> 
> >>>> Is anything that i display in the upper half visible on one eye and
> things
> >> i 
> >>>> display in the lower half visible on the other eye?
> >>>> Or is there more necessary to display 3D content via HDMI on a 3D TV?
> >>> 
> >>> I don't have a 3D TV myself, so I cannot make guarantees, but there have
> >>> been reports that using Bino with a 3D TV works fine. It depends on
> >>> which input modes the TV supports. Possible modes are HDMI frame
> packing,
> >>> above/below, side by side, frame alternating / page flipping,
> >>> checkerboard, ...  Do you have more information on this?
> >>> 
> >>> Martin
> >>> 
> >> 
> >> 
> >> 
> >> 
> > 
> > 
> > 
> 
> 
> 
>