[Bayonne-devel] driver started 59 ports instead of 60

[ef]

Hi,

bayonne 1.2.13 on Red Hat 7.3 (compiled very fine,  great !)
hardware : Dialogic D/600JCT-2E1  - Drivers : 5.1  SP1


something disturb me :)


With E1 :  30 ports are detected

With 2 E1 : 59 ports are detected ?

Where is the last one ? ;)

---

bayonne on --test mode :

----

SERVER VERSION 1.2.13; i686 Linux 2.4.18-3
TGI VERSION 2.2; driver=dialogic; prefix=//apps/bayonne; etc=/etc/
Loading TGI plugins...
tgi: perl interpreter loaded
tgi: initialized; uid=99 pid=4007
tgi: buffer=/var/run/bayonne/bayonne.ctrl; cfd=8; time=10
Loading DSO plugin images...
debug: trace module loaded
dialogic: setting polled mode
dialogic: vox card 1 of 60; ports=4
dialogic: pri card 1; timeslots =30
dialogic: vox card 2 of 60; ports=4
dialogic: vox card 3 of 60; ports=4
dialogic: vox card 4 of 60; ports=4
dialogic: vox card 5 of 60; ports=4
dialogic: vox card 6 of 60; ports=4
dialogic: vox card 7 of 60; ports=4
dialogic: vox card 8 of 60; ports=2
dialogic: vox card 9 of 60; ports=4
dialogic: vox card 10 of 60; ports=4
dialogic: pri card 2; timeslots =30
dialogic: vox card 11 of 60; ports=4
dialogic: vox card 12 of 60; ports=4
dialogic: vox card 13 of 60; ports=4
dialogic: vox card 14 of 60; ports=4
dialogic: vox card 15 of 60; ports=4
dialogic: vox card 16 of 60; ports=2

^  total = 60 ports ...but...

Dialogic driver loaded; capacity=59; maxconference=0


^  CAPACITY=59   why ???



[...]

allocating trunks...
dx(30): lsi No error
dx(30): hook Command not supported
dx(31): lsi No error
dx(31): hook Command not supported
dx(32): lsi No error
dx(32): hook Command not supported

^  what are theses logs on only dx(30/31/32) ??


starting trunks.....
driver starting...
driver started 59 port(s)

^ 59 ports ;(

-------

My dialogic.cfg


                ###################################
                #                                 #
                #   DIALOGIC CONFIGURATION FILE   #
                #                                 #
                ###################################




[Genload - All Boards]
LogFile=genload.log
BusType=SCBus
SCBusClockMaster=AUTOMATIC
SCBusClockMasterSource=AUTOMATIC
PCMEncoding=ALAW

[Genload - PCI ID 1] /* Dual T1/E1 PCI HD */
ParameterFile=ctr4.prm
ISDNProtocol=CTR4
ParameterFile2=ctr4.prm
ISDNProtocol2=CTR4


^  some errors ?


--





--