[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Remote programming
From: |
René Liebscher |
Subject: |
Re: [avrdude-dev] Remote programming |
Date: |
Sun, 17 Feb 2013 20:01:29 +0100 |
User-agent: |
Mozilla/5.0 (Windows NT 5.1; rv:17.0) Gecko/20130107 Thunderbird/17.0.2 |
Hi,
in the online documentation of avrdude you find
([1]http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Des
criptions):
------------------
-P port
Use port to identify the device to which the programmer is attached.
Normally, the default parallel port is used, but if the programmer type
normally connects to the serial port, the default serial port will be
used. See Appendix A, Platform Dependent Information, to find out the
default port names for your platform. If you need to use a different
parallel or serial port, use this option to specify the alternate port
name.
...
For programmers that attach to a serial port using some kind of higher
level protocol (as opposed to bit-bang style programmers), port can be
specified as net:host:port. In this case, instead of trying to open a
local device, a TCP network connection to (TCP) porton host is
established. The remote endpoint is assumed to be a terminal or console
server that connects the network stream to a local serial port where
the actual programmer has been attached to. The port is assumed to be
properly configured, for example using a transparent 8-bit data
connection without parity at 115200 Baud for a STK500.
This feature is currently not implemented for Win32 systems.
------------------
Did you already try this?
Kind regards
Rene
Am 17.02.2013 18:25, schrieb "Ing. Daniel Rozsnyo":
Is there any way to realise a remote programming with avrdude?
Use case: our AVR device with a bootloader (emulating a programmer)
will be connected to an ethernet-to-serial converter (well, one
which operates over cellular network), so on the server side I need
to connect to a specific TCP port with avrdude, instead of
/dev/ttySx or ttyUSBx.
Does anybody want to get sponsored for creating such a patch?
Or would something like remserial be better?
[2]http://lpccomp.bc.ca/remserial/
Thanks,
Daniel
_______________________________________________
avrdude-dev mailing list
address@hidden
[4]https://lists.nongnu.org/mailman/listinfo/avrdude-dev
References
1.
http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions
2. http://lpccomp.bc.ca/remserial/
3. mailto:address@hidden
4. https://lists.nongnu.org/mailman/listinfo/avrdude-dev