[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #38307] Can't write usersig of an xmega256a3
From: |
Travis Griggs |
Subject: |
[avrdude-dev] [bug #38307] Can't write usersig of an xmega256a3 |
Date: |
Mon, 11 Feb 2013 18:48:38 +0000 |
User-agent: |
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_2) AppleWebKit/536.26.17 (KHTML, like Gecko) Version/6.0.2 Safari/536.26.17 |
URL:
<http://savannah.nongnu.org/bugs/?38307>
Summary: Can't write usersig of an xmega256a3
Project: AVR Downloader/UploaDEr
Submitted by: travisgriggs
Submitted on: Mon 11 Feb 2013 06:48:36 PM GMT
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: travisgriggs
Originator Email:
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
travisg$ ~/Downloads/trunk/avrdude/avrdude -v -p atxmega256a3 -P usb -c
avrispmkii -U usersig:w:0EA7EE10.hex:i
avrdude: Version 5.11svn, compiled on Feb 9 2013 at 11:03:28
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/usr/local/etc/avrdude.conf"
User configuration file is "/Users/travisg/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : avrispmkii
avrdude: usbdev_open(): Found AVRISP mkII, serno: 000200085694
AVR Part : ATxmega256A3
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
prodsig 0 0 0 0 no 512 512 0 0
0 0x00 0x00
usersig 0 0 0 0 no 512 512 0 0
0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0 0
0 0x00 0x00
lock 0 0 0 0 no 1 0 0 0
0 0x00 0x00
data 0 0 0 0 no 0 0 0 0
0 0x00 0x00
eeprom 0 0 0 0 no 4096 32 0 0
0 0x00 0x00
application 0 0 0 0 no 262144 512 0 0
0 0x00 0x00
apptable 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
boot 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
flash 0 0 0 0 no 270336 512 0 0
0 0x00 0x00
fuse0 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
avrdude: stk500v2_recv_mk2: error in USB receive
Hardware Version: 21
Firmware Version Master : 1.17
Vtarget : 3.0 V
SCK period : 8.00 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9842
avrdude: NOTE: Programmer supports page erase for Xmega devices.
Each page will be erased before programming it, but no chip erase is
performed.
To disable page erases, specify the -D option; for a chip-erase, use
the -e option.
avrdude: reading input file "0EA7EE10.hex"
avrdude: writing usersig (512 bytes):
Writing | | 0%
0.00savrdude: stk600_xprog_page_erase(): unknown paged memory "usersig"
Writing | ################################################## | 100% 0.35s
avrdude: 512 bytes of usersig written
avrdude: verifying usersig memory against 0EA7EE10.hex:
avrdude: load data usersig data from input file 0EA7EE10.hex:
avrdude: input file 0EA7EE10.hex contains 512 bytes
avrdude: reading on-chip usersig data:
Reading | ################################################## | 100% 0.01s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0x0a != 0x0e
avrdude: verification error; content mismatch
avrdude done. Thank you.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?38307>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
- [avrdude-dev] [bug #38307] Can't write usersig of an xmega256a3,
Travis Griggs <=