[avrdude-dev] Fwd: FTDI flashing stops at different positions

[Daniel Schulz]

---------- Forwarded message ----------
From: Daniel Schulz <address@hidden>
Date: 2012/7/19
Subject: Re: [avrdude-dev] FTDI flashing stops at different positions



Yes, sorry.
Now I can reproduce the behavior. If I flash with -vvvv (it worked
sometimes with -vv or even -vvv) then it will go through the whole
process. It doesnt matter, if I restarted the PC or not. If I turn the
-vvvv of, it stops again at 97%.
Idont really know what to do. Should I buy a "real" flashing device?
Or what can you recommend?

Ah, additionally I've tried to get a log, but there is only a
FTDI LOG: 80 20 fb 82 00 00
FTDI LOG: 80 60 fb 82 00 00
repeatedly in the file. Is this right?!
My command line looked like this:
avrdude -p m8 -c avrftdi -b 1000000 -U
flash:w:/home/daniel/ng/quax/17a410_i2c_r08/hex/bl-17a_p40_m1.hex:a
-vvvv >avrdude_quax.log

thanks
Daniel

2012/7/19 Joerg Wunsch <address@hidden>:
> As Daniel Schulz wrote:
>
>> Finally I've got it working, but I cannot explain why. [...]
>
> Was this supposed to go to the list?
>
> --
> cheers, J"org               .-.-.   --... ...--   -.. .  DL8DTL
>
> http://www.sax.de/~joerg/                        NIC: JW11-RIPE
> Never trust an operating system you don't have sources for. ;-)