[avrdude-dev] [bug #27596] AT90s2333 is not correctly supported in avrdude.conf

[anonymous]

URL:
  <http://savannah.nongnu.org/bugs/?27596>

                 Summary: AT90s2333 is not correctly supported in
avrdude.conf
                 Project: AVR Downloader/UploaDEr
            Submitted by: None
            Submitted on: Sun 04 Oct 2009 06:40:18 PM UTC
                Category: None
                Severity: 3 - Normal
                Priority: 5 - Normal
              Item Group: None
                  Status: None
                 Privacy: Public
             Assigned to: None
         Originator Name: Eric
        Originator Email: address@hidden
             Open/Closed: Open
         Discussion Lock: Any

    _______________________________________________________

Details:

I could not get my programmer to work on my AT90s2333 however the programmer
did work if I inserted a mega8 device. After consulting the avrdude.conf file
I found this remark:

##### WARNING: No XML file for device 'AT90S2333'! #####

I also so that the setting for programming the mega8 and the 2333 are
different so this led my to believe something is missing. So I edited the
avrdude.conf file and stored it at my ~/.avrduderc. I took the sections from
the AT90s4433 device which is very simular except for the memory size. This is
what I have now:

#------------------------------------------------------------
# AT90s2333
#------------------------------------------------------------

part
    id               = "2333";
##### WARNING: No XML file for device 'AT90S2333'! #####
##### NOW withs Eric'x modifications #####
    desc             = "AT90S2333";
    stk500_devcode   = 0x42;
    avr910_devcode   = 0x34;
    signature        = 0x1e 0x91 0x05;
    chip_erase_delay = 20000;
    pgm_enable       = "1 0 1 0  1 1 0 0    0 1 0 1  0 0 1 1",
                       "x x x x  x x x x    x x x x  x x x x";

    chip_erase       = "1 0 1 0  1 1 0 0    1 0 0 0  0 0 0 0",
                       "x x x x  x x x x    x x x x  x x x x";

    timeout             = 200;
    stabdelay           = 100;
    cmdexedelay         = 25;
    synchloops          = 32;
    bytedelay           = 0;
    pollindex           = 3;
    pollvalue           = 0x53;
    predelay            = 1;
    postdelay           = 1;
    pollmethod          = 0;

    pp_controlstack     =
        0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
        0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
        0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
        0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
    hventerstabdelay    = 100;
    progmodedelay       = 0;
    latchcycles         = 0;
    togglevtg           = 0;
    poweroffdelay       = 0;
    resetdelayms        = 0;
    resetdelayus        = 0;
    hvleavestabdelay    = 15;
    chiperasepulsewidth = 15;
    chiperasepolltimeout = 0;
    programfusepulsewidth = 2;
    programfusepolltimeout = 0;
    programlockpulsewidth = 0;
    programlockpolltimeout = 1;

    memory "eeprom"
        size            = 128;
        min_write_delay = 9000;
        max_write_delay = 20000;
        readback_p1     = 0x00;
        readback_p2     = 0xff;
        read            = "1  0  1  0   0  0  0  0   x x x x  x x x x", 
                          "x a6 a5 a4  a3 a2 a1 a0   o o o o  o o o o";

        write           = "1  1  0  0   0  0  0  0   x x x x  x x x x",
                          "x a6 a5 a4  a3 a2 a1 a0   i i i i  i i i i";

        mode            = 0x04;
        delay           = 12;
        blocksize       = 128;
        readsize        = 256;
      ;

    memory "flash"
        size            = 2048;
        min_write_delay = 9000;
        max_write_delay = 20000;
        readback_p1     = 0xff;
        readback_p2     = 0xff;
        read_lo         = "  0   0   1   0    0   0   0   0",
                          "  x   x   x   x    x   x  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  o   o   o   o    o   o   o   o";

        read_hi         = "  0   0   1   0    1   0   0   0",
                          "  x   x   x   x    x   x  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  o   o   o   o    o   o   o   o";

        write_lo        = "  0   1   0   0    0   0   0   0",
                          "  x   x   x   x    x   x  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  i   i   i   i    i   i   i   i";

        write_hi        = "  0   1   0   0    1   0   0   0",
                          "  x   x   x   x    x   x  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  i   i   i   i    i   i   i   i";

        mode            = 0x04;
        delay           = 12;
        blocksize       = 128;
        readsize        = 256;
      ;

    memory "signature"
        size            = 3;
        read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x 
x",
                          "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o 
o";
      ;
    memory "fuse"
        size            = 1;
        min_write_delay = 9000;
        max_write_delay = 20000;
        pwroff_after_write = yes;
        read            = "0 1 0 1  0 0 0 0   x x x x  x x x x",
                          "x x x x  x x x x   x x o o  o o o o";

        write           = "1 0 1 0  1 1 0 0   1 0 1 i  i i i i",
                          "x x x x  x x x x   x x x x  x x x x";
      ;
    memory "lock"
        size            = 1;
        min_write_delay = 9000;
        max_write_delay = 20000;
        read            = "0 1 0 1  1 0 0 0   x x x x  x x x x",
                          "x x x x  x x x x   x x x x  x o o x";

        write           = "1 0 1 0  1 1 0 0   1 1 1 1  1 i i 1",
                          "x x x x  x x x x   x x x x  x x x x";
      ;
  ;


Sofar I have been able to program the device no. I did not come to testing it
yet since I need to upgrade my local software in order to do that. However my
gut feeling tells me it will work. If not I will file a additional bug. 

I used the search mechanism with keyword AT90s2333 but did not get relevant
info. So I concluded I better file a bug.




    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?27596>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/