[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] Re: How to talk to second device in JTAG chain?
From: |
Grant Edwards |
Subject: |
[avrdude-dev] Re: How to talk to second device in JTAG chain? |
Date: |
Wed, 7 Nov 2007 17:43:23 +0000 (UTC) |
User-agent: |
slrn/0.9.8.1 (Linux) |
On 2007-11-07, Eric Weddington <address@hidden> wrote:
>
>
>> -----Original Message-----
>> From:
>> address@hidden
>> [mailto:address@hidden
>> rg] On Behalf Of Grant Edwards
>> Sent: Wednesday, November 07, 2007 10:20 AM
>> To: address@hidden
>> Subject: [avrdude-dev] Re: How to talk to second device in JTAG chain?
>>
>> On 2007-11-06, Grant Edwards <address@hidden> wrote:
>> > On 2007-11-05, Joerg Wunsch <address@hidden> wrote:
>>
>> >> The attached patch adds a -j option that allows adjusting JTAG
>> >> daisy-chain parameters. [...]
>>
>> > Brilliant! I'll give it a try.
>>
>> It works just fine. FWIW, an MSP430 is "8 bits long". With
>> the AVR preceded by the MSP430, configuring the avrdude for 1
>> device before and 8 bits before allowed avrdude to talk to the
>> AVR.
>>
>> The MSP430 itself will work in a chain (as long as it's first
>> in the chain -- an obnoxious/ignorant decision by TI). However,
>> the bad news is that none of the TI SW tools can tolerate any
>> other devices in the chain at all (an even _more_
>> obnoxious/ignorant decision by TI). If you ever run into the
>> TI guys who made those decisions (IIRC it was the group in down
>> in Freising), kick them in the shins for me. ;)
>
> Sounds like you have many reasons to drop the MSP430 part and
> use a second AVR. ;-)
The MSP430 parts have their advantages. For that particular
app, the MSP430 is quite a bit smaller and cheaper.
In general, being able to clock the UART from 32768Hz while
having the high-speed clock and CPU completely shut down can
save a _lot_ of power. Not having to have a high-frequency
crystal is also pretty nice.
--
Grant Edwards grante Yow! My LESLIE GORE record
at is BROKEN ...
visi.com