[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] How about changing the "stk500" programmer to V2 by de
From: |
Henrik Brix Andersen |
Subject: |
Re: [avrdude-dev] How about changing the "stk500" programmer to V2 by default? |
Date: |
Wed, 20 Sep 2006 10:21:47 +0200 |
User-agent: |
Mutt/1.5.13 (2006-08-11) |
On Wed, Sep 20, 2006 at 12:40:57AM +0200, Joerg Wunsch wrote:
> I've now created a "stk500generic" (internal name in AVRDUDE, it's
> mapped into the -c stk500 programmer type) programmer which is
> actually a stub programmer: it only has an open() function, and
> subsequently tries to open the device specified as stk500v1 first,
> failing that as stk500v2. (The timeouts in the stk500v1 protocol
> implementation are much shorter than those in the stk500v2 one, so
> doing it the other way around would take an eternity for stk500v1
> programmers to establish the connection.) That way, a connection will
> be established regardless of the actual firmware version. If one of
> both protocol versions could successfully establish communication, a
> message is printed that suggests the user would better use either -c
> stk500v1 or -c stk500v2, and the remaining communication is left to
> the acutal protocol version-specific module then.
That sounds like a very good solution. Any ETA on when avrdude-5.2
will be out?
Regards,
Brix
--
Henrik Brix Andersen <address@hidden>
pgp9_NLo3JP8q.pgp
Description: PGP signature