[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] avrdude: stk500_getsync error message
From: |
E. Weddington |
Subject: |
Re: [avrdude-dev] avrdude: stk500_getsync error message |
Date: |
Thu, 03 Jun 2004 09:26:57 -0600 |
On 3 Jun 2004 at 11:53, Peter Warlich wrote:
> Hi,
>
> I am using avrdude 4.3.0 and an STK500 (v1.46) to program my target board
> with an ATmega16 on it.
> If I attempt to program the flash or the fuses I get the following message
> (have not tried the EEPROM):
>
> avrdude: stk500_getsync (): not in sync: resp=0x15
>
> If I retry the programming or power cycle the stk500 board before the
> programming it works fine.
> This occurs if I run avrdude from a command line or from WinAVR (040404).
>
> Example of fuse programming command I use:
> avrdude -p m16 -c stk500 -U hfuse:w:0xC0:m -U lfuse:w:0c7F:m
>
> Can somebody help me to get around this problem?
>
Does the problem happen every time? Or only every once in awhile?
For other reader's information: the avrdude in WinAVR 20040404 is the
experimental win32 version from Martin Thomas (who I've CC'd).
Eric
SV: [avrdude-dev] avrdude: stk500_getsync error message, Peter Warlich, 2004/06/04
SV: [avrdude-dev] avrdude: stk500_getsync error message, Peter Warlich, 2004/06/07
SV: [avrdude-dev] avrdude: stk500_getsync error message, Peter Warlich, 2004/06/10