[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] Calibration memory in mega128
From: |
Lee Mitchell |
Subject: |
[avrdude-dev] Calibration memory in mega128 |
Date: |
Tue, 16 Mar 2004 10:31:42 +0000 |
Hi folks
I noticed that the entry in avrdude.conf for the calibration memory for the
ATmega128 reads/writes only one byte of calibration memory when in fact there
are 4 according to the datasheet (different calibration bytes for different
internal oscillator frequencies).
I have avrdude 4.3.0 installed on my windows 98 machine.
I changed the entry in my avrdude.conf file to the following and it seems to
work ok (but to be honest, i just took a guess at what it should be!).
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
I noticed that the file in cvs on savanah is not correct either. would anyone
with the knowlege be so good as to make the changes in cvs ?
regards
Lee Mitchell
CONFIDENTIALITY NOTICE: This message is intended only for the use of
the individual or entity to which it is addressed, and may contain
information that is privileged, confidential and exempt from disclosure
under applicable law.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [avrdude-dev] Calibration memory in mega128,
Lee Mitchell <=