[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: [avrdude-dev] AVR910 Programming speed
From: |
Theodore A. Roth |
Subject: |
Re[2]: [avrdude-dev] AVR910 Programming speed |
Date: |
Thu, 3 Apr 2003 11:25:54 -0800 (PST) |
On Thu, 3 Apr 2003, Bertolt Mildner wrote:
:) TAR> Without auto incr, avrdude sends 3 extra bytes (cmd + hi + lo bytes).
:)
:) OK, sounds like a starting point. But can that really triple the
:) programming time?
Well, it should reduce the overhead from sending 5 bytes to 2 bytes
when programming a byte. That will help, but we'll have to see where
else to trim some fat.
:)
:) TAR> Could you send me a 2.3 firmware if you have it? I didn't have any
:) TAR> luck with google.
:)
:) It can be downloaded here: http://www.avr1.org/pavr/software.html
Thanks. I'll try to look into this more soon. (I've been swamped with
patches for a bunch of projects this week, plus the day job, plus ...)
Ted Roth
- [avrdude-dev] AVR910 Programming speed, Bertolt Mildner, 2003/04/03
- Re: [avrdude-dev] AVR910 Programming speed, E. Weddington, 2003/04/03
- Re: [avrdude-dev] AVR910 Programming speed, Theodore A. Roth, 2003/04/03
- Re[2]: [avrdude-dev] AVR910 Programming speed, Bertolt Mildner, 2003/04/03
- Re[2]: [avrdude-dev] AVR910 Programming speed,
Theodore A. Roth <=
- Re[2]: [avrdude-dev] AVR910 Programming speed, Bertolt Mildner, 2003/04/04
- Re[3]: [avrdude-dev] AVR910 Programming speed, Bertolt Mildner, 2003/04/07
- Re[3]: [avrdude-dev] AVR910 Programming speed, Theodore A. Roth, 2003/04/07
- Re[4]: [avrdude-dev] AVR910 Programming speed, Bertolt Mildner, 2003/04/09