[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] stk500 and firmware 1.14
From: |
Brian Dean |
Subject: |
Re: [avrdude-dev] stk500 and firmware 1.14 |
Date: |
Thu, 20 Feb 2003 12:43:54 -0500 |
User-agent: |
Mutt/1.4i |
On Thu, Feb 20, 2003 at 09:39:20AM -0800, Theodore A. Roth wrote:
> My interpretation is that the psuedo mode is for the 8-pin avrs which
> don't have enough pins for full parallel programming, thus they use a
> hiv serial programming (not to be confused with spi ISP).
So perhaps for the config file we could have:
serial = yes | no;
parallel = yes | no | pseudo;
Defaults for both would be "yes" unless specified otherwise?
That should provide enough information to fill out the "set device"
parameters required by the stk500.
Other suggestions?
-Brian
--
Brian Dean address@hidden
- Re: [avrdude-dev] stk500 and firmware 1.14, (continued)
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/19
- Re: [avrdude-dev] stk500 and firmware 1.14, Brian Dean, 2003/02/19
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Brian Dean, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Brian Dean, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Brian Dean, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14,
Brian Dean <=
- Re: [avrdude-dev] stk500 and firmware 1.14, Joerg Wunsch, 2003/02/20
- Re: [avrdude-dev] stk500 and firmware 1.14, Theodore A. Roth, 2003/02/20