[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [avr-libc-dev] WinAVR - gcc 3.4.6 - AVR Studio - DuoCore PC -Stackpo
From: |
Eric Weddington |
Subject: |
RE: [avr-libc-dev] WinAVR - gcc 3.4.6 - AVR Studio - DuoCore PC -Stackpointer problem |
Date: |
Mon, 20 Nov 2006 16:48:27 -0700 |
Hi Steffan,
To help you, we would need to see a source code test case, with the actual
error output that you described.
Eric Weddington
> -----Original Message-----
> From:
> address@hidden
> [mailto:address@hidden
> org] On Behalf Of Steffen Rose
> Sent: Monday, November 20, 2006 2:30 AM
> To: address@hidden
> Subject: [avr-libc-dev] WinAVR - gcc 3.4.6 - AVR Studio -
> DuoCore PC -Stackpointer problem
>
> Hello,
>
> our program works compiled with cygwin, Makefiles and WinAVR
> works correctly compiled on different PCs. But on ony System we
> have the following problem:
>
> The PC is a DuoCore PC and we use the IDE AVR Studio for
> compiling. The used Options are the same than the Makefile.
> Additional Options are used for creating needed Files for the
> AVR Studio (-M -MD ..).
>
> Now, we can see corrupt code on different positions. With minimal
> changes the error is on a total other place. On the one time the
> wrong parameters from the Stack frame is used. One time the
> Stackpointer High-byte is set to 0x00.
>
> Have anyone help for me?
>
> --
> Regards
> Steffen Rose
>
>
>
>
> _______________________________________________
> AVR-libc-dev mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avr-libc-dev
>