Re: [avr-gcc-list] avrxmega7 device-not-found

[Adisak Anusornsrirung]

Did you try

-mmcu=avrxmega6

 

 

avrxmega6

“XMEGA” devices with more than 128 KiB of program memory.
mcu = atxmega128a3, atxmega128a3u, atxmega128b1, atxmega128b3, atxmega128c3, atxmega128d3, atxmega128d4, atxmega192a3, atxmega192a3u, atxmega192c3, atxmega192d3, atxmega256a3, atxmega256a3b, atxmega256a3bu, atxmega256a3u, atxmega256c3, atxmega256d3, atxmega384c3, atxmega384d3.

avrxmega7

“XMEGA” devices with more than 128 KiB of program memory and more than 64 KiB of RAM.
mcu = atxmega128a1, atxmega128a1u, atxmega128a4u.

 

 

Credits: https://gcc.gnu.org/onlinedocs/gcc/AVR-Options.html

 

 

 

 

 

From: Ajay Garg

Sent: Friday, November 20, 2015 8:19 AM

To: Shawn Rich

Cc: address@hidden

Subject: Re: [avr-gcc-list] avrxmega7 device-not-found

 

Same response Shawn ::


############################################################
address@hidden:~$ avr-gcc -mmcu=atxmega256a3bu ledblink.c -o ledblink.o | grep 256
In file included from ledblink.c:2:0:
/usr/lib/avr/include/avr/io.h:428:6: warning: #warning "device type not defined" [-Wcpp]
#    warning "device type not defined"
      ^
In file included from ledblink.c:3:0:
/usr/lib/avr/include/util/delay.h:90:3: warning: #warning "F_CPU not defined for <util/delay.h>" [-Wcpp]
# warning "F_CPU not defined for <util/delay.h>"
   ^
/usr/lib/avr/include/util/delay.h:95:3: warning: #warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed" [-Wcpp]
# warning "Compiler optimizations disabled; functions from <util/delay.h> won't work as designed"
   ^
ledblink.c: In function ‘main’:
ledblink.c:16:9: error: ‘DDRC’ undeclared (first use in this function)
         DDRC |=1<<PC2;  /* PC2 will now be the output pin */
         ^
ledblink.c:16:9: note: each undeclared identifier is reported only once for each function it appears in
ledblink.c:16:19: error: ‘PC2’ undeclared (first use in this function)
         DDRC |=1<<PC2;  /* PC2 will now be the output pin */
                   ^
ledblink.c:19:17: error: ‘PORTC’ undeclared (first use in this function)
                 PORTC &= ~(1<<PC2);/* PC2 LOW */
############################################################

Clearly either I am missing something, or something is really screwed up :-\

 

On Fri, Nov 20, 2015 at 2:38 AM, Shawn Rich <address@hidden> wrote:

The avr libc user manual shows that part under supported devices. Have you tried it?

http://www.nongnu.org/avr-libc/user-manual/index.html

shawn

 

On Thu, Nov 19, 2015 at 3:56 PM, Ajay Garg <address@hidden> wrote:

Senthil,

(I am just a newest newbie, but,) Assuming your hypothesis is correct, what should I pass to compile the code on http://www.atmel.com/tools/XMEGA-A3BUXPLAINED.aspx, using Atmel ATxmega256A3BU microcontroller?

_______________________________________________

AVR-GCC-list mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list

--

~/shawn

--

Regards,
Ajay

---

_______________________________________________
AVR-GCC-list mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list