[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Debug with AVRStudio4?
From: |
Wolfgang Wegner |
Subject: |
Re: [avr-gcc-list] Debug with AVRStudio4? |
Date: |
Wed, 07 Sep 2005 14:03:30 +0100 |
On 7 Sep 2005 at 13:02, Joerg Wunsch wrote:
> My own experience says that it's best to get used to the artefacts
> caused by debugging optimized code, as a good number of programming
> errors will only be found once the optimizer is turned on (as the
> compiler will then aggressively impose all its rules onto the source
> program).
yes, that is my experience, too - under IAR I even had the problem
that some errors only came up with debugging info turned off... :-(
But still, I think I know the artefacts in debugging optimized code,
but at the moment, the combination WinAVR <-> AVRstudio is unusable
for debugging. At least I can not correlate the steps, breakpoints
and variable accesses to anything even remotely near the point where
AVRstudio thinks the ATMega is stepping right now.
Regards,
Wolfgang
- [avr-gcc-list] Debug with AVRStudio4?, Wolfgang Wegner, 2005/09/07
- Re: [avr-gcc-list] Debug with AVRStudio4?, Joerg Wunsch, 2005/09/07
- Re: [avr-gcc-list] Debug with AVRStudio4?, David Kelly, 2005/09/07
- Re: [avr-gcc-list] Debug with AVRStudio4?, Russell Shaw, 2005/09/07
- Re: [avr-gcc-list] Debug with AVRStudio4?, Joerg Wunsch, 2005/09/07
- Re: [avr-gcc-list] Debug with AVRStudio4?, Russell Shaw, 2005/09/07
Re: [avr-gcc-list] Debug with AVRStudio4?, Joerg Wunsch, 2005/09/07