[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [despammed] Re: [avr-gcc-list] My first time with AVR (help)
|
From: |
Helix |
|
Subject: |
Re: [despammed] Re: [avr-gcc-list] My first time with AVR (help) |
|
Date: |
Sat, 17 Jan 2004 16:50:32 +0100 |
> > I need to understand two things:
> > 1. If the 8515 is alive and the xilinx cable is properly connected.
> > to do that I've done
> > # uisp -sprog=xil -dpart=AT90S8515
> > and I get back
> > Atmel AVR AT90S8515 is found
> > Unfortunately this string appers also if I have the board turned off
:-(
> > However, let's suppose it's up and running :-)
>
> your programmer is probably supplying all the power the board needs. In
fact, a lot
> of the targets I work on are powered by my programmer just because I'm
lazy.
I don't understand what you want to mean, sorry.
I am using the XILINX parallel cable to program the board
This is my schematic diagram, maybe could be useful
http://www.koansoftware.com/avr/Atmel8515-minimal.pdf
TIA
- [avr-gcc-list] My first time with AVR (help), Helix, 2004/01/17
- Re: [avr-gcc-list] My first time with AVR (help), Herb Peyerl, 2004/01/17
- Re: [despammed] Re: [avr-gcc-list] My first time with AVR (help),
Helix <=
- Re: [avr-gcc-list] My first time with AVR (help), Rod Moffitt, 2004/01/17
- Re: [avr-gcc-list] My first time with AVR (help), Helix, 2004/01/17
- Re: [avr-gcc-list] My first time with AVR (help), Richard Urwin, 2004/01/17
- Re: [avr-gcc-list] My first time with AVR (help), Helix, 2004/01/17
- Re: [avr-gcc-list] My first time with AVR (help), Rod Moffitt, 2004/01/18
- Re: [avr-gcc-list] My first time with AVR (help), Helix, 2004/01/18
Re: [avr-gcc-list] My first time with AVR (help), Herb Peyerl, 2004/01/18