[avr-gcc-list] Re: uisp + mac

[Michael Seeman]

If this is any help, the command I use on my 2000 powerbook is:

uisp -v -dprog=avr910 -dspeed=19200 -dpart=auto --erase --upload --verify if=< file.rom > 

this uses the default port /dev/avr, which i create a symbolic link from the serial port that my Keyspan Serial-to-USB adapter creates (I use a terminal program such as Zterm to find that).

I'm using the programmer mentioned in Atmel app note 910, baud rate 19200.  use 'man uisp' to get more programming options.  This is a serial programmer; i haven't tried parallel programmers, since the parallel port hasn't been supported on macs until very recently (see keyspan adapters).

- Mike Seeman

On Monday, August 25, 2003, at 08:00  PM, address@hidden wrote:

Date: Mon, 25 Aug 2003 15:05:16 +0200
From: Torsten Hahn <address@hidden>
To: address@hidden
Subject: [avr-gcc-list] uisp + mac
Message-ID: <address@hidden>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
MIME-Version: 1.0 (Apple Message framework v552)
Content-Transfer-Encoding: quoted-printable
Precedence: list
Message: 13

Hi,

on my linux box i programm my avr device with

uisp -v=3D3 -dprog=3Dstk200 -dlpt=3D/dev/parport0 --upload =
if=3Dfilename.ihex

Can somebody tell me, what options i have to use under MacOSX ?=20
Especially the device names for the parallel port etc.

(There is no /dev/parportX on the Mac)

cu,
Torsten.

--
Dipl. Nat. Torsten Hahn
Institut f=FCr Experimentelle Physik / TU Bergakademie Freiberg
mail: address@hidden
Tel.: +49 (0) 3731 392670=