[avr-gcc-list] uisp and atmega128 problem

[Torsten Hahn]

Am Dienstag, 5. März 2002 11:23 schrieben Sie:
> yeah,
>
> my other post must have gotten lost...
>
>
> you have to check your configure.in file for avr-libc-20020203:
>
>
> address@hidden avr-libc-20020203]$ grep 128 configure.in
>         AVR_CRT_MEGA='crtm161.o crtm163.o crtm32.o crtm128.o'
>
>
> the line above was commented in the middle, so that the crtm128.0 file
> didn't get built...
>
>
> i still have a problem verifying flash on the 128l using uisp20020303.
> any ideas on that?
>

Nice, this works. But i also run into trouble using uisp20020303 and the 
stk200 with the atmega128.

>>
uisp -dprog=stk200 -dlpt=/dev/parport0 --erase
Atmel AVR ATmega128 is found.
Erasing device ...
Reinitializing device
Atmel AVR ATmega128 is found.

>>
uisp -v=3 -dprog=stk200 -dlpt=/dev/parport0 --upload if=main.ihex

Reset inactive time (t_reset) 1000 us
AVR Direct Parallel Access succeeded after 0 retries.
Vendor Code: 0x00
Part Family: 0x01
Part Number: 0x02
Cannot identify device because it is locked.
Device similar to the ATmega103-old is found.
Page Write Disabled
FLASH Write Delay (t_wd_flash): 61111 us
EEPROM Write Delay (t_wd_eeprom): 11111 us
Uploading: flash
#Device is locked.
Address out of memory range.

I have no idea how to fix this.

CU,
Torsten.
-- 
Torsten Hahn 
TU Bergakademie Freiberg - Institut für Experimentelle Physik 
Silbermannstraße 1, 09596 Freiberg
mail: address@hidden
phone: +49 3731 392670 
avr-gcc-list at http://avr1.org