[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Searching for Ethernet Chip
|
From: |
Jesper Hansen |
|
Subject: |
Re: [avr-gcc-list] Searching for Ethernet Chip |
|
Date: |
Sun, 6 Jan 2002 12:44:11 +0100 |
Hi Torsten,
> does anybody know of a project or some schematics where an
> Ethernet Chip is attached directly to an address/data/control bus?
Well, they normally are.
> If the Chip could switch between 10/100MBit this would be so very
> great.
Normally the 10 MBit chips Cirrus 8900 or Realtek 8019 is the most popular,
as they interface easily to an 8-bit uC bus.
Cirrus also have a 10/100 MBit chip, it may possibly be used too.
> I'm very interested in the schematics and some test software.
> An AVR or ARM based project would be just great.
http://www.ethernut.de
http://www.atmel.com/atmel/acrobat/doc2396.pdf
http://avr.jpk.co.nz/eavr/eavr.html
http://ucip.sourceforge.net/
http://www.hrz.de/ee8515.htm
http://www.iready.com/
/Jesper
http://www.yampp.com
avr-gcc-list at http://avr1.org
- [avr-gcc-list] Searching for Ethernet Chip, Torsten Mohr, 2002/01/09
- Re: [avr-gcc-list] Searching for Ethernet Chip,
Jesper Hansen <=
- Re: [avr-gcc-list] Searching for Ethernet Chip, Peter Bozzay, 2002/01/09
- [avr-gcc-list] Specifying crt*.o file, Anton Erasmus, 2002/01/09
- Re: [avr-gcc-list] Specifying crt*.o file, Scott Finneran, 2002/01/09
- Re: [avr-gcc-list] Specifying crt*.o file, Anton Erasmus, 2002/01/12
- Re: [avr-gcc-list] Specifying crt*.o file, Matthew Lee, 2002/01/12
- Re: [avr-gcc-list] Specifying crt*.o file, Anton Erasmus, 2002/01/12
- Re: [avr-gcc-list] Specifying crt*.o file, reinhard . jessich, 2002/01/12
- Re: [avr-gcc-list] Specifying crt*.o file, Anton Erasmus, 2002/01/12