Re: [avr-chat] EEMPROM Error with ATtiny1634

[georg chambert]

So how goes it ?
from the timestamp I figure you are in US, or night worker ;)

/georg

----- Original Message ----- 
From: "Erik Christiansen" <address@hidden>
To: <address@hidden>
Sent: Friday, February 02, 2018 3:49 AM
Subject: Re: [avr-chat] EEMPROM Error with ATtiny1634


> On 28.01.18 01:11, Bernhard Rittirsch wrote:
> > I' trying to write an .eep, and get always: "verification error, first
> > mismatch at byte 0x0000"
>
> To cross-check on what the debug code is printing to the serial port,
> I'd use avrdude -t -U eeprom:w:filename.eep , followed by a :r: to check
> the eeprom contents directly. If there's a mismatch, then it's a dud
> device or an avrdude bug. (Possibly config, as you surmise. But more
> testing first. ;)
>
> If that confirms faulty eeprom writing, then I'd compare the ATtiny1634
> conf with another ATtiny of similar vintage and eeprom size. Nearly two
> decades ago, I had to tweak one (Either the ATmega64 or 16, AFAIR.)
>
> Erik
>
> _______________________________________________
> AVR-chat mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avr-chat