|
From: | René Liebscher |
Subject: | Re: [avr-chat] [avrdude-dev] Remote programming |
Date: | Sun, 17 Feb 2013 20:01:29 +0100 |
User-agent: | Mozilla/5.0 (Windows NT 5.1; rv:17.0) Gecko/20130107 Thunderbird/17.0.2 |
Hi,
in the online documentation of avrdude you find (http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions): ------------------
Use port to identify the device to which the programmer is attached. Normally, the default parallel port is used, but if the programmer type normally connects to the serial port, the default serial port will be used. See Appendix A, Platform Dependent Information, to find out the default port names for your platform. If you need to use a different parallel or serial port, use this option to specify the alternate port name. For programmers that attach to a serial port using some kind
of higher level protocol (as opposed to bit-bang style
programmers), port can be specified as This feature is currently not implemented for Win32 systems. Did you already try this? Kind regards René Am 17.02.2013 18:25, schrieb "Ing. Daniel Rozsnyó": Is there any way to realise a remote programming with avrdude? |
[Prev in Thread] | Current Thread | [Next in Thread] |