[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
make automake less verbose (try 2)
|
From: |
Jan Engelhardt |
|
Subject: |
make automake less verbose (try 2) |
|
Date: |
Thu, 23 Oct 2008 13:07:52 -0400 (EDT) |
|
User-agent: |
Alpine 1.10 (LNX 962 2008-03-14) |
There have been a number of attempts at introducing a quiet behavior to
automake, much like the Linux kernel's kbuild does.
Reference:
http://osdir.com/ml/sysutils.automake.patches/2007-07/msg00024.html
(and others linked from the thread)
Known previous attempts always either were POSIX-incompliant due to the
use of $(if ...), were limited to selecting verbosity at configure-time,
or involved the costly use of $(shell ...). This patch does it without
any of these three.
Getting your verbose output back is as simple as using `make V=1`,
or by setting V statically in your Makefile.am.
Signed-off-by: Jan Engelhardt <address@hidden>
# All rights are handed to the automake team.
---
automake.in | 91 ++++++++++++++++++++++++++++++++++++++++++++++------
lib/am/depend2.am | 6 +++
lib/am/library.am | 5 +-
lib/am/ltlibrary.am | 1
lib/am/program.am | 1
5 files changed, 93 insertions(+), 11 deletions(-)
Index: automake-1.10.1/automake.in
===================================================================
--- automake-1.10.1.orig/automake.in
+++ automake-1.10.1/automake.in
@@ -51,6 +51,9 @@ struct (# Short name of the language (c,
# Nice name of the language (C, Fortran 77...).
'Name' => "\$",
+ "verbose_compile" => '$',
+ "verbose_link" => '$',
+
# List of configure variables which must be defined.
'config_vars' => '@',
@@ -696,6 +699,8 @@ sub initialize_per_input ()
# C.
register_language ('name' => 'c',
'Name' => 'C',
+ 'verbose_compile' => '${AM_VERBOSE_CC}',
+ 'verbose_link' => '${AM_VERBOSE_CCLD}',
'config_vars' => ['CC'],
'ansi' => 1,
'autodep' => '',
@@ -714,6 +719,8 @@ register_language ('name' => 'c',
# C++.
register_language ('name' => 'cxx',
'Name' => 'C++',
+ 'verbose_compile' => '${AM_VERBOSE_CXX}',
+ 'verbose_link' => '${AM_VERBOSE_CXXLD}',
'config_vars' => ['CXX'],
'linker' => 'CXXLINK',
'link' => '$(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -732,6 +739,8 @@ register_language ('name' => 'cxx',
# Objective C.
register_language ('name' => 'objc',
'Name' => 'Objective C',
+ 'verbose_compile' => '${AM_VERBOSE_OBJC}',
+ 'verbose_link' => '${AM_VERBOSE_OBJCLD}',
'config_vars' => ['OBJC'],
'linker' => 'OBJCLINK',
'link' => '$(OBJCLD) $(AM_OBJCFLAGS) $(OBJCFLAGS)
$(AM_LDFLAGS) $(LDFLAGS) -o $@',
@@ -749,6 +758,8 @@ register_language ('name' => 'objc',
# Unified Parallel C.
register_language ('name' => 'upc',
'Name' => 'Unified Parallel C',
+ 'verbose_compile' => '${AM_VERBOSE_UPC}',
+ 'verbose_link' => '${AM_VERBOSE_UPCLD}',
'config_vars' => ['UPC'],
'linker' => 'UPCLINK',
'link' => '$(UPCLD) $(AM_UPCFLAGS) $(UPCFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -776,6 +787,7 @@ register_language ('name' => 'header',
# Yacc (C & C++).
register_language ('name' => 'yacc',
'Name' => 'Yacc',
+ 'verbose_compile' => '${AM_VERBOSE_YACC}',
'config_vars' => ['YACC'],
'flags' => ['YFLAGS'],
'compile' => '$(YACC) $(YFLAGS) $(AM_YFLAGS)',
@@ -789,6 +801,7 @@ register_language ('name' => 'yacc',
'nodist_specific' => 1);
register_language ('name' => 'yaccxx',
'Name' => 'Yacc (C++)',
+ 'verbose_compile' => '${AM_VERBOSE_YACC}',
'config_vars' => ['YACC'],
'rule_file' => 'yacc',
'flags' => ['YFLAGS'],
@@ -804,6 +817,7 @@ register_language ('name' => 'yaccxx',
# Lex (C & C++).
register_language ('name' => 'lex',
'Name' => 'Lex',
+ 'verbose_compile' => '${AM_VERBOSE_LEX}',
'config_vars' => ['LEX'],
'rule_file' => 'lex',
'flags' => ['LFLAGS'],
@@ -817,6 +831,7 @@ register_language ('name' => 'lex',
'nodist_specific' => 1);
register_language ('name' => 'lexxx',
'Name' => 'Lex (C++)',
+ 'verbose_compile' => '${AM_VERBOSE_LEX}',
'config_vars' => ['LEX'],
'rule_file' => 'lex',
'flags' => ['LFLAGS'],
@@ -832,6 +847,7 @@ register_language ('name' => 'lexxx',
# Assembler.
register_language ('name' => 'asm',
'Name' => 'Assembler',
+ 'verbose_compile' => '${AM_VERBOSE_AS}',
'config_vars' => ['CCAS', 'CCASFLAGS'],
'flags' => ['CCASFLAGS'],
@@ -850,6 +866,7 @@ register_language ('name' => 'asm',
# Preprocessed Assembler.
register_language ('name' => 'cppasm',
'Name' => 'Preprocessed Assembler',
+ 'verbose_compile' => '${AM_VERBOSE_AS}',
'config_vars' => ['CCAS', 'CCASFLAGS'],
'autodep' => 'CCAS',
@@ -866,6 +883,8 @@ register_language ('name' => 'cppasm',
# Fortran 77
register_language ('name' => 'f77',
'Name' => 'Fortran 77',
+ 'verbose_compile' => '${AM_VERBOSE_F77}',
+ 'verbose_link' => '${AM_VERBOSE_F77LD}',
'config_vars' => ['F77'],
'linker' => 'F77LINK',
'link' => '$(F77LD) $(AM_FFLAGS) $(FFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -883,6 +902,8 @@ register_language ('name' => 'f77',
# Fortran
register_language ('name' => 'fc',
'Name' => 'Fortran',
+ 'verbose_compile' => '${AM_VERBOSE_FC}',
+ 'verbose_link' => '${AM_VERBOSE_FCLD}',
'config_vars' => ['FC'],
'linker' => 'FCLINK',
'link' => '$(FCLD) $(AM_FCFLAGS) $(FCFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -899,6 +920,8 @@ register_language ('name' => 'fc',
# Preprocessed Fortran
register_language ('name' => 'ppfc',
'Name' => 'Preprocessed Fortran',
+ 'verbose_compile' => '${AM_VERBOSE_FC}',
+ 'verbose_link' => '${AM_VERBOSE_FCLD}',
'config_vars' => ['FC'],
'linker' => 'FCLINK',
'link' => '$(FCLD) $(AM_FCFLAGS) $(FCFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -930,6 +953,8 @@ register_language ('name' => 'ppfc',
# available).
register_language ('name' => 'ppf77',
'Name' => 'Preprocessed Fortran 77',
+ 'verbose_compile' => '${AM_VERBOSE_F77}',
+ 'verbose_link' => '${AM_VERBOSE_F77LD}',
'config_vars' => ['F77'],
'linker' => 'F77LINK',
'link' => '$(F77LD) $(AM_FFLAGS) $(FFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -947,6 +972,8 @@ register_language ('name' => 'ppf77',
# Ratfor.
register_language ('name' => 'ratfor',
'Name' => 'Ratfor',
+ 'verbose_compile' => '${AM_VERBOSE_F77}',
+ 'verbose_link' => '${AM_VERBOSE_F77LD}',
'config_vars' => ['F77'],
'linker' => 'F77LINK',
'link' => '$(F77LD) $(AM_FFLAGS) $(FFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -965,6 +992,8 @@ register_language ('name' => 'ratfor',
# Java via gcj.
register_language ('name' => 'java',
'Name' => 'Java',
+ 'verbose_compile' => '${AM_VERBOSE_GCJ}',
+ 'verbose_link' => '${AM_VERBOSE_GCJLD}',
'config_vars' => ['GCJ'],
'linker' => 'GCJLINK',
'link' => '$(GCJLD) $(AM_GCJFLAGS) $(GCJFLAGS) $(AM_LDFLAGS)
$(LDFLAGS) -o $@',
@@ -1286,6 +1315,7 @@ sub handle_languages
OBJOBJ => '$@',
LTOBJ => '$@',
+ VERBOSE => $lang->verbose_compile,
COMPILE => '$(' . $lang->compiler . ')',
LTCOMPILE => '$(LT' . $lang->compiler . ')',
-o => $output_flag,
@@ -1329,7 +1359,7 @@ sub handle_languages
$ptltflags = 'AM_LIBTOOLFLAGS' unless set_seen $ptltflags;
my $obj_ltcompile =
- "\$(LIBTOOL) $libtool_tag\$($ptltflags) \$(LIBTOOLFLAGS) "
+ "\$(LIBTOOL) \${AM_LIBTOOL_SILENT} $libtool_tag\$($ptltflags)
\$(LIBTOOLFLAGS) "
. "--mode=compile $obj_compile";
# We _need_ `-o' for per object rules.
@@ -1422,6 +1452,7 @@ sub handle_languages
OBJOBJ => "$obj_.obj",
LTOBJ => "$obj_.lo",
+ VERBOSE => $lang->verbose_compile,
COMPILE => $obj_compile,
LTCOMPILE => $obj_ltcompile,
-o => $output_flag,
@@ -1448,6 +1479,7 @@ sub handle_languages
OBJOBJ => "$obj.obj",
LTOBJ => "$obj.lo",
+ VERBOSE => $lang->verbose_compile,
COMPILE => $obj_compile,
LTCOMPILE => $obj_ltcompile,
-o => $output_flag,
@@ -2410,6 +2442,15 @@ sub handle_libtool
LTRMS => join ("\n", @libtool_rms));
}
+sub find_link_verbose($)
+{
+ foreach my $lang_name (keys %languages) {
+ if ($languages{$lang_name}->linker eq $_[0]) {
+ return $languages{$lang_name}->verbose_link;
+ }
+ }
+}
+
# handle_programs ()
# ------------------
# Handle C programs.
@@ -2472,7 +2513,9 @@ sub handle_programs
set_seen ($xname . '_LDFLAGS');
# Determine program to use for link.
- my $xlink = &define_per_target_linker_variable ($linker, $xname);
+ my($xlink, $vlink) = &define_per_target_linker_variable ($linker,
$xname);
+ $vlink ||= &find_link_verbose($xlink);
+ $vlink ||= "";
# If the resulting program lies into a subdirectory,
# make sure this directory will exist.
@@ -2485,6 +2528,7 @@ sub handle_programs
PROGRAM => $one_file,
XPROGRAM => $xname,
XLINK => $xlink,
+ VERBOSE => $vlink,
DIRSTAMP => $dirstamp,
EXEEXT => '$(EXEEXT)');
@@ -2585,6 +2629,7 @@ sub handle_libraries
$output_rules .= &file_contents ('library',
$where,
+ VERBOSE => '${AM_VERBOSE_AR}',
LIBRARY => $onelib,
XLIBRARY => $xlib,
DIRSTAMP => $dirstamp);
@@ -2761,7 +2806,9 @@ sub handle_ltlibraries
NONLIBTOOL => 0, LIBTOOL => 1);
# Determine program to use for link.
- my $xlink = &define_per_target_linker_variable ($linker, $xlib);
+ my($xlink, $vlink) = &define_per_target_linker_variable ($linker, $xlib);
+ $vlink ||= &find_link_verbose($xlink);
+ $vlink ||= "";
my $rpathvar = "am_${xlib}_rpath";
my $rpath = "\$($rpathvar)";
@@ -2809,6 +2856,7 @@ sub handle_ltlibraries
XLTLIBRARY => $xlib,
RPATH => $rpath,
XLINK => $xlink,
+ VERBOSE => $vlink,
DIRSTAMP => $dirstamp);
if ($seen_libobjs)
{
@@ -5872,7 +5920,6 @@ sub define_pretty_variable ($$$@)
}
}
-
# define_variable ($VAR, $VALUE, $WHERE)
# --------------------------------------
# Define a new Automake Makefile variable VAR to VALUE, but only if
@@ -5936,7 +5983,7 @@ sub define_compiler_variable ($)
if $lang->libtool_tag && exists $libtool_tags{$lang->libtool_tag};
&define_variable ($var, $value, INTERNAL);
&define_variable ("LT$var",
- "\$(LIBTOOL) $libtool_tag\$(AM_LIBTOOLFLAGS) "
+ "\$(LIBTOOL) \${AM_LIBTOOL_SILENT}
$libtool_tag\$(AM_LIBTOOLFLAGS) "
. "\$(LIBTOOLFLAGS) --mode=compile $value",
INTERNAL)
if var ('LIBTOOL');
@@ -5958,7 +6005,7 @@ sub define_linker_variable ($)
# CCLINK = $(CCLD) blah blah...
&define_variable ($lang->linker,
((var ('LIBTOOL') ?
- "\$(LIBTOOL) $libtool_tag\$(AM_LIBTOOLFLAGS) "
+ "\$(LIBTOOL) \${AM_LIBTOOL_SILENT}
$libtool_tag\$(AM_LIBTOOLFLAGS) "
. "\$(LIBTOOLFLAGS) --mode=link " : '')
. $lang->link),
INTERNAL);
@@ -5986,7 +6033,7 @@ sub define_per_target_linker_variable ($
if $lang->libtool_tag && exists $libtool_tags{$lang->libtool_tag};
$link_command =
- "\$(LIBTOOL) $libtool_tag\$(AM_LIBTOOLFLAGS) \$(LIBTOOLFLAGS) "
+ "\$(LIBTOOL) \${AM_LIBTOOL_SILENT} $libtool_tag\$(AM_LIBTOOLFLAGS)
\$(LIBTOOLFLAGS) "
. "--mode=link " . $link_command;
}
@@ -6004,11 +6051,11 @@ sub define_per_target_linker_variable ($
# If the computed command is the same as the generic command, use
# the command linker variable.
- return $lang->linker
+ return ($lang->linker, $lang->verbose_link)
if $link_command eq $orig_command;
&define_variable ("${target}_LINK", $link_command, INTERNAL);
- return "${target}_LINK";
+ return ("${target}_LINK", $lang->verbose_link);
}
################################################################
@@ -6355,6 +6402,55 @@ sub read_main_am_file
$output_vars .= '# ' . subst ('configure_input') . "\n";
$output_vars .= $gen_copyright;
+ # We are using an indirection via __AM_VERBOSE_* here so that
+ # ${V} is not used in any files but automake.in itself,
+ # especially avoiding the use of ${V} template files.
+ #
+ # GEN is for generate, which you can use for any manual rules.
+ $output_vars .= join("\n",
+ '__AM_LIBTOOL_SILENT = --silent',
+ '__AM_VERBOSE_CC = @echo " CC " $@;',
+ '__AM_VERBOSE_CCLD = @echo " CCLD " $@;',
+ '__AM_VERBOSE_CXX = @echo " CXX " $@;',
+ '__AM_VERBOSE_CXXLD = @echo " CXXLD " $@;',
+ '__AM_VERBOSE_OBJC = @echo " OBJC " $@;',
+ '__AM_VERBOSE_OBJCLD = @echo " OBJCLD " $@;',
+ '__AM_VERBOSE_UPC = @echo " UPC " $@;',
+ '__AM_VERBOSE_UPCLD = @echo " UPCLD " $@;',
+ '__AM_VERBOSE_YACC = @echo " YACC " $@;',
+ '__AM_VERBOSE_LEX = @echo " LEX " $@;',
+ '__AM_VERBOSE_AS = @echo " AS " $@;',
+ '__AM_VERBOSE_F77 = @echo " F77 " $@;',
+ '__AM_VERBOSE_F77LD = @echo " F77LD " $@;',
+ '__AM_VERBOSE_FC = @echo " FC " $@;',
+ '__AM_VERBOSE_FCLD = @echo " FCLD " $@;',
+ '__AM_VERBOSE_GCJ = @echo " GCJ " $@;',
+ '__AM_VERBOSE_GCJLD = @echo " GCJLD " $@;',
+ '__AM_VERBOSE_AR = @echo " AR " $@;',
+ '__AM_VERBOSE_GEN = @echo " GEN " $@;',
+ 'AM_LIBTOOL_SILENT = ${__AM_LIBTOOL_SILENT${V}}',
+ 'AM_VERBOSE_CC = ${__AM_VERBOSE_CC${V}}',
+ 'AM_VERBOSE_CCLD = ${__AM_VERBOSE_CCLD${V}}',
+ 'AM_VERBOSE_CXX = ${__AM_VERBOSE_CXX${V}}',
+ 'AM_VERBOSE_CXXLD = ${__AM_VERBOSE_CXXLD${V}}',
+ 'AM_VERBOSE_OBJC = ${__AM_VERBOSE_OBJC${V}}',
+ 'AM_VERBOSE_OBJCLD = ${__AM_VERBOSE_OBJCLD${V}}',
+ 'AM_VERBOSE_UPC = ${__AM_VERBOSE_UPC${V}}',
+ 'AM_VERBOSE_UPCLD = ${__AM_VERBOSE_UPCLD${V}}',
+ 'AM_VERBOSE_YACC = ${__AM_VERBOSE_YACC${V}}',
+ 'AM_VERBOSE_LEX = ${__AM_VERBOSE_LEX${V}}',
+ 'AM_VERBOSE_AS = ${__AM_VERBOSE_AS${V}}',
+ 'AM_VERBOSE_F77 = ${__AM_VERBOSE_F77${V}}',
+ 'AM_VERBOSE_F77LD = ${__AM_VERBOSE_F77LD${V}}',
+ 'AM_VERBOSE_FC = ${__AM_VERBOSE_FC${V}}',
+ 'AM_VERBOSE_FCLD = ${__AM_VERBOSE_FCLD${V}}',
+ 'AM_VERBOSE_GCJ = ${__AM_VERBOSE_GCJ${V}}',
+ 'AM_VERBOSE_GCJLD = ${__AM_VERBOSE_GCJLD${V}}',
+ 'AM_VERBOSE_AR = ${__AM_VERBOSE_AR${V}}',
+ 'AM_VERBOSE_GEN = ${__AM_VERBOSE_GEN${V}}',
+ '',
+ );
+
# We want to predefine as many variables as possible. This lets
# the user set them with `+=' in Makefile.am.
&define_standard_variables;
Index: automake-1.10.1/lib/am/depend2.am
===================================================================
--- automake-1.10.1.orig/lib/am/depend2.am
+++ automake-1.10.1/lib/am/depend2.am
@@ -63,6 +63,7 @@ if %?NONLIBTOOL%
?GENERIC?%EXT%.o:
?!GENERIC?%OBJ%: %SOURCE%
if %FASTDEP%
+ %VERBOSE% \
## In fast-dep mode, we can always use -o.
## For non-suffix rules, we must emulate a VPATH search on %SOURCE%.
?!GENERIC? %COMPILE% -MT %OBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJ%
`test -f '%SOURCE%' || echo '$(srcdir)/'`%SOURCE% && \
@@ -71,6 +72,7 @@ if %FASTDEP%
?GENERIC??SUBDIROBJ? %COMPILE% -MT %OBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o
%OBJ% %SOURCE% &&\
mv -f %DEPBASE%.Tpo %DEPBASE%.Po
else !%FASTDEP%
+ %VERBOSE% @AMDEPBACKSLASH@
if %AMDEP%
source='%SOURCE%' object='%OBJ%' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@
@@ -88,6 +90,7 @@ endif !%FASTDEP%
?GENERIC?%EXT%.obj:
?!GENERIC?%OBJOBJ%: %SOURCE%
if %FASTDEP%
+ %VERBOSE% \
## In fast-dep mode, we can always use -o.
## For non-suffix rules, we must emulate a VPATH search on %SOURCE%.
?!GENERIC? %COMPILE% -MT %OBJOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o
%OBJOBJ% `if test -f '%SOURCE%'; then $(CYGPATH_W) '%SOURCE%'; else
$(CYGPATH_W) '$(srcdir)/%SOURCE%'; fi` && \
@@ -96,6 +99,7 @@ if %FASTDEP%
?GENERIC??SUBDIROBJ? %COMPILE% -MT %OBJOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c%
-o %OBJOBJ% `$(CYGPATH_W) '%SOURCE%'` &&\
mv -f %DEPBASE%.Tpo %DEPBASE%.Po
else !%FASTDEP%
+ %VERBOSE% @AMDEPBACKSLASH@
if %AMDEP%
source='%SOURCE%' object='%OBJOBJ%' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@
@@ -115,6 +119,7 @@ if %?LIBTOOL%
?GENERIC?%EXT%.lo:
?!GENERIC?%LTOBJ%: %SOURCE%
if %FASTDEP%
+ %VERBOSE% \
## In fast-dep mode, we can always use -o.
## For non-suffix rules, we must emulate a VPATH search on %SOURCE%.
?!GENERIC? %LTCOMPILE% -MT %LTOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o
%LTOBJ% `test -f '%SOURCE%' || echo '$(srcdir)/'`%SOURCE% && \
@@ -123,6 +128,7 @@ if %FASTDEP%
?GENERIC??SUBDIROBJ? %LTCOMPILE% -MT %LTOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c%
-o %LTOBJ% %SOURCE% &&\
mv -f %DEPBASE%.Tpo %DEPBASE%.Plo
else !%FASTDEP%
+ %VERBOSE% @AMDEPBACKSLASH@
if %AMDEP%
source='%SOURCE%' object='%LTOBJ%' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@
Index: automake-1.10.1/lib/am/library.am
===================================================================
--- automake-1.10.1.orig/lib/am/library.am
+++ automake-1.10.1/lib/am/library.am
@@ -16,6 +16,7 @@
## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
## 02110-1301, USA.
%LIBRARY%: $(%XLIBRARY%_OBJECTS) $(%XLIBRARY%_DEPENDENCIES) %DIRSTAMP%
- -rm -f %LIBRARY%
- $(%XLIBRARY%_AR) %LIBRARY% $(%XLIBRARY%_OBJECTS) $(%XLIBRARY%_LIBADD)
+ %VERBOSE% \
+ rm -f %LIBRARY% || true; \
+ $(%XLIBRARY%_AR) %LIBRARY% $(%XLIBRARY%_OBJECTS) $(%XLIBRARY%_LIBADD); \
$(RANLIB) %LIBRARY%
Index: automake-1.10.1/lib/am/ltlibrary.am
===================================================================
--- automake-1.10.1.orig/lib/am/ltlibrary.am
+++ automake-1.10.1/lib/am/ltlibrary.am
@@ -16,4 +16,5 @@
## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
## 02110-1301, USA.
%LTLIBRARY%: $(%XLTLIBRARY%_OBJECTS) $(%XLTLIBRARY%_DEPENDENCIES) %DIRSTAMP%
+ %VERBOSE% \
$(%XLINK%) %RPATH% $(%XLTLIBRARY%_OBJECTS) $(%XLTLIBRARY%_LIBADD)
$(LIBS)
Index: automake-1.10.1/lib/am/program.am
===================================================================
--- automake-1.10.1.orig/lib/am/program.am
+++ automake-1.10.1/lib/am/program.am
@@ -23,4 +23,5 @@
## Or maybe not... sadly, incremental linkers are rarer than losing
## systems.
@rm -f %PROGRAM%%EXEEXT%
+ %VERBOSE% \
$(%XLINK%) $(%XPROGRAM%_OBJECTS) $(%XPROGRAM%_LDADD) $(LIBS)
- make automake less verbose (try 2),
Jan Engelhardt <=