[FYI] {maint} sync: update files from upstream with "make fetch"

[Stefano Lattarini]

* lib/texinfo.tex: Update.

Signed-off-by: Stefano Lattarini <address@hidden>
---
 lib/texinfo.tex | 71 ++++++++++++++++++++++++++-------------------------------
 1 file changed, 32 insertions(+), 39 deletions(-)

diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index f458ba7..f3093d0 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2012-09-04.17}
+\def\texinfoversion{2012-09-12.16}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -2272,8 +2272,6 @@ end
 
 \gdef\markupsetcodequoteleft{\let`\codequoteleft}
 \gdef\markupsetcodequoteright{\let'\codequoteright}
-
-\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
 }
 
 \let\markupsetuplqcode \markupsetcodequoteleft
@@ -2282,6 +2280,9 @@ end
 \let\markupsetuplqexample \markupsetcodequoteleft
 \let\markupsetuprqexample \markupsetcodequoteright
 %
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
 \let\markupsetuplqsamp \markupsetcodequoteleft
 \let\markupsetuprqsamp \markupsetcodequoteright
 %
@@ -2291,8 +2292,6 @@ end
 \let\markupsetuplqverbatim \markupsetcodequoteleft
 \let\markupsetuprqverbatim \markupsetcodequoteright
 
-\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
-
 % Allow an option to not use regular directed right quote/apostrophe
 % (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
 % The undirected quote is ugly, so don't make it the default, but it
@@ -2382,8 +2381,7 @@ end
   \aftersmartic
 }
 
-% like \smartslanted except unconditionally uses \ttsl, and no ic.
-% @var is set to this for defun arguments.
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
 \def\ttslanted#1{{\ttsl #1}}
 
 % @cite is like \smartslanted except unconditionally use \sl.  We never want
@@ -2695,10 +2693,6 @@ end
   \let\email=\uref
 \fi
 
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
-
 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
@@ -2722,11 +2716,17 @@ end
 % Default is `distinct'.
 \kbdinputstyle distinct
 
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
 \def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
 
 % definition of @key that produces a lozenge.  Doesn't adjust to text size.
 %\setfont\keyrm\rmshape{8}{1000}{OT1}
@@ -3272,7 +3272,8 @@ end
 % Settings used for typesetting titles: no hyphenation, no indentation,
 % don't worry much about spacing, ragged right.  This should be used
 % inside a \vbox, and fonts need to be set appropriately first.  Because
-% it is always used for titles, nothing else, we call \rmisbold.
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
 % 
 \def\raggedtitlesettings{%
   \rmisbold
@@ -3289,7 +3290,7 @@ end
 
 \parseargdef\title{%
   \checkenv\titlepage
-  \vbox{\titlefonts \raggedtitlesettings #1}
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
   % print a rule at the page bottom also.
   \finishedtitlepagefalse
   \vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -4256,7 +4257,7 @@ end
 }
 \def\ifcmddefinedfail{\doignore{ifcommanddefined}}
 
-% @ifcommandnotdefined CMD ... handlded similar to @ifclear above.
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
 \makecond{ifcommandnotdefined}
 \def\ifcommandnotdefined{%
   \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
@@ -5592,14 +5593,6 @@ end
 
 % Define @majorheading, @heading and @subheading
 
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-%       1) We use \vbox rather than the earlier \line to permit
-%          overlong headings to fold.
-%       2) \hyphenpenalty is set to 10000 because hyphenation in a
-%          heading is obnoxious; this forbids it.
-%       3) Likewise, headings look best if no \parindent is used, and
-%          if justification is not attempted.  Hence \raggedright.
-
 \def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
   \parsearg\chapheadingzzz
@@ -5607,10 +5600,8 @@ end
 
 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
 \def\chapheadingzzz#1{%
-  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\ptexraggedright
-                    \rmisbold #1\hfill}}%
-  \bigskip \par\penalty 200\relax
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
   \suppressfirstparagraphindent
 }
 
@@ -5769,8 +5760,7 @@ end
     %
     % Typeset the actual heading.
     \nobreak % Avoid page breaks at the interline glue.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
-          \hangindent=\wd0 \centerparametersmaybe
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
   \nobreak\bigskip % no page break after a chapter title
@@ -5792,18 +5782,18 @@ end
 \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
 %
 \def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\ptexraggedright
-                       \rmisbold #1\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
 }
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
 \par\penalty 5000 %
 }
 \def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt
-                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
 }
 \def\CHAPFopen{%
   \global\let\chapmacro=\chfopen
@@ -7082,7 +7072,10 @@ end
   \df \sl \hyphenchar\font=0
   %
   % On the other hand, if an argument has two dashes (for instance), we
-  % want a way to get ttsl.  Let's try @var for that.
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
   \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
   #1%
   \sl\hyphenchar\font=45
-- 
1.7.12.317.g1c54b74