[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FYI] {master} maint: sync auxiliary files from upstream
From: |
Stefano Lattarini |
Subject: |
[FYI] {master} maint: sync auxiliary files from upstream |
Date: |
Thu, 16 Feb 2012 10:52:01 +0100 |
* lib/texinfo.tex: Synced from upstream, by "make fetch".
* lib/config.guess: Likewise.
* lib/config.sub: Likewise.
---
lib/config.guess | 16 +++++++--
lib/config.sub | 19 ++++++++----
lib/texinfo.tex | 89 +++++++++++++++++++++++++++++++++++++----------------
3 files changed, 87 insertions(+), 37 deletions(-)
diff --git a/lib/config.guess b/lib/config.guess
index 49ba16f..d622a44 100755
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2012-01-01'
+timestamp='2012-02-10'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ timestamp='2012-01-01'
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -863,6 +861,13 @@ EOF
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
@@ -1320,6 +1325,9 @@ EOF
i*86:AROS:*:*)
echo ${UNAME_MACHINE}-pc-aros
exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/lib/config.sub b/lib/config.sub
index d6b6b3c..c894da4 100755
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2012-01-01'
+timestamp='2012-02-10'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -21,9 +21,7 @@ timestamp='2012-01-01'
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -132,6 +130,10 @@ case $maybe_os in
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
@@ -247,6 +249,7 @@ case $basic_machine in
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
+ | aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] |
alpha64pca5[67] \
| am33_2.0 \
@@ -319,7 +322,7 @@ case $basic_machine in
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
@@ -332,7 +335,10 @@ case $basic_machine in
strongarm | thumb | xscale)
basic_machine=arm-unknown
;;
-
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
xscaleeb)
basic_machine=armeb-unknown
;;
@@ -355,6 +361,7 @@ case $basic_machine in
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
+ | aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index 2abda0f..dcdeb9b 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2012-01-03.09}
+\def\texinfoversion{2012-01-19.16}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -2842,8 +2842,8 @@ end
%
\def\outfmtnametex{tex}
%
-\def\inlinefmt#1{\doinlinefmt #1,\finish}
-\def\doinlinefmt#1,#2,\finish{%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
@@ -2855,8 +2855,8 @@ end
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
%
-\def\inlineraw{\tex \doinlineraw}
-\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
\def\inlinerawname{#1}%
\ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
@@ -7802,26 +7802,36 @@ end
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
\def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\topbox
+\newbox\printedrefnamebox
+\newbox\printedmanualbox
+%
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
\unsepspaces
- \def\printedmanual{\ignorespaces #5}%
+ %
\def\printedrefname{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual\unskip}%
- \setbox0=\hbox{\printedrefname\unskip}%
- \ifdim \wd0 = 0pt
+ \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+ %
+ \def\printedmanual{\ignorespaces #5}%
+ \setbox\printedmanualbox = \hbox{\printedmanual\unskip}%
+ %
+ % If the printed reference name (arg #3) was not explicitly given in
+ % the @xref, figure out what we want to use.
+ \ifdim \wd\printedrefnamebox = 0pt
% No printed node name was explicitly given.
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
- % Use the node name inside the square brackets.
+ % Not auto section-title: use node name inside the square brackets.
\def\printedrefname{\ignorespaces #1}%
\else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
+ % Auto section-title: use chapter/section title inside
+ % the square brackets if we have it.
+ \ifdim \wd\printedmanualbox > 0pt
+ % It is in another manual, so we don't have it; use node name.
\def\printedrefname{\ignorespaces #1}%
\else
\ifhavexrefs
- % We know the real title if we have the xref values.
+ % We (should) know the real title if we have the xref values.
\def\printedrefname{\refx{#1-title}{}}%
\else
% Otherwise just copy the Info node name.
@@ -7867,7 +7877,7 @@ end
\iffloat\Xthisreftitle
% If the user specified the print name (third arg) to the ref,
% print it instead of our usual "Figure 1.2".
- \ifdim\wd0 = 0pt
+ \ifdim\wd\printedrefnamebox = 0pt
\refx{#1-snt}{}%
\else
\printedrefname
@@ -7875,21 +7885,46 @@ end
%
% if the user also gave the printed manual name (fifth arg), append
% "in MANUALNAME".
- \ifdim \wd1 > 0pt
+ \ifdim \wd\printedmanualbox > 0pt
\space \putwordin{} \cite{\printedmanual}%
\fi
\else
% node/anchor (non-float) references.
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+ %
+ % If we use \unhbox to print the node names, TeX does not insert
+ % empty discretionaries after hyphens, which means that it will not
+ % find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens,
+ % this is a loss. Therefore, we give the text of the node name
+ % again, so it is as if TeX is seeing it for the first time.
+ %
+ % Cross-manual reference. Only include the "Section ``foo'' in" if
+ % the foo is neither missing or Top. Thus, @xref{,,,foo,The Foo Manual}
+ % outputs simply "see The Foo Manual".
+ \ifdim \wd\printedmanualbox > 0pt
+ % What is the 7sp about? The idea is that we also want to omit
+ % the Section part if we would be printing "Top", since they are
+ % clearly trying to refer to the whole manual. But, this being
+ % TeX, we can't easily compare strings while ignoring the possible
+ % spaces before and after in the input. By adding the arbitrary
+ % 7sp, we make it much less likely that a real node name would
+ % happen to have the same width as "Top" (e.g., in a monospaced font).
+ % I hope it will never happen in practice.
+ %
+ % For the same basic reason, we retypeset the "Top" at every
+ % reference, since the current font is indeterminate.
+ %
+ \setbox\topbox = \hbox{Top\kern7sp}%
+ \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+ \ifdim \wd2 > 7sp
+ \ifdim \wd2 = \wd\topbox \else
+ \putwordSection{} ``\printedrefname'' \putwordin{}\space
+ \fi
+ \fi
+ \cite{\printedmanual}%
\else
+ % Reference in this manual.
+ %
% _ (for example) has to be the character _ for the purposes of the
% control sequence corresponding to the node, but it has to expand
% into the usual \leavevmode...\vrule stuff for purposes of
@@ -7901,7 +7936,7 @@ end
\setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
}%
- % output the `[mynode]' via a macro so it can be overridden.
+ % output the `[mynode]' via the macro below so it can be overridden.
\xrefprintnodename\printedrefname
%
% But we always want a comma and a space:
--
1.7.9
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [FYI] {master} maint: sync auxiliary files from upstream,
Stefano Lattarini <=