[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.11-573-g
|
From: |
Stefano Lattarini |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.11-573-gf60ca93 |
|
Date: |
Thu, 22 Dec 2011 12:23:44 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=f60ca932334699a765d2b51432f9533dcc9e0807
The branch, maint has been updated
via f60ca932334699a765d2b51432f9533dcc9e0807 (commit)
via e9150626541429b8ce18e0a6d7d7e9dd635c0d5f (commit)
from 26133b3bca603bde75fac88a70296e400d7673a9 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit f60ca932334699a765d2b51432f9533dcc9e0807
Author: Stefano Lattarini <address@hidden>
Date: Fri Dec 9 18:46:54 2011 +0100
devel: help in comparing Makefile.in from different commits
Now that the generated Makefile.in, configure and aclocal.m4 files
are no longer committed in Automake's git repository, a simple
"git diff" or "git log" no longer shows if and how a change in
Automake results in changes to the Makefile.in files and/or
configure script of its own build system. Still, the ability to
peek so easily at such differences has proved itself quite useful
in the past, often revealing inconsistencies and blunders, and
sometimes even bugs; so it would be a pity to lose that altogether.
With this change, we add a new maintainer recipe that re-introduces
much of that capability, by generating and comparing on the fly the
Makefile.in, configure and aclocal.m4 derived from two arbitrary
commits of the Automake repository.
* Makefile.am (autodiffs, compare-autodiffs): New phony targets.
commit e9150626541429b8ce18e0a6d7d7e9dd635c0d5f
Author: Stefano Lattarini <address@hidden>
Date: Thu Dec 8 22:54:18 2011 +0100
repo: don't commit generated files in the git repository anymore
It has been quite some time since autoconf and libtool have stopped
committing the generated autotools files in their git repositories,
with no significant ill effects we're aware of. It's true that the
autoconf bootstrap process has now the minor annoyance that a
pre-installed autoconf is required to complete it; but luckily
automake will not have a similar annoyance, since our bootstrap
script take care, through some hoops, to use the very automake and
aclocal versions from the current git checkout to generate the
required aclocal.m4 and Makefile.in files. In fact, this has been
a necessity also in the past, because automake has been known to
use in its own build system new development features that hadn't
been present in any previously released automake distribution.
* aclocal.m4: Delete.
* configure: Likewise.
* Makefile.in: Likewise.
* doc/Makefile.in: Likewise.
* lib/Automake/Makefile.in: Likewise.
* lib/Automake/tests/Makefile.in: Likewise.
* lib/Makefile.in: Likewise.
* lib/am/Makefile.in: Likewise.
* m4/Makefile.in: Likewise.
* tests/Makefile.in: Likewise.
* .gitignore: Ignore configure, aclocal.m4, and all the
Makefile.in files.
* configure.ac (AC_PREREQ): New macro call, to require the
latest autoconf (2.68 for the moment).
-----------------------------------------------------------------------
Summary of changes:
.gitignore | 3 +
ChangeLog | 37 +
Makefile.am | 69 +
Makefile.in | 1340 --------------
aclocal.m4 | 35 -
configure | 3980 ----------------------------------------
configure.ac | 1 +
doc/Makefile.in | 847 ---------
lib/Automake/Makefile.in | 671 -------
lib/Automake/tests/Makefile.in | 616 -------
lib/Makefile.in | 647 -------
lib/am/Makefile.in | 445 -----
m4/Makefile.in | 484 -----
tests/Makefile.in | 1566 ----------------
14 files changed, 110 insertions(+), 10631 deletions(-)
delete mode 100644 Makefile.in
delete mode 100644 aclocal.m4
delete mode 100755 configure
delete mode 100644 doc/Makefile.in
delete mode 100644 lib/Automake/Makefile.in
delete mode 100644 lib/Automake/tests/Makefile.in
delete mode 100644 lib/Makefile.in
delete mode 100644 lib/am/Makefile.in
delete mode 100644 m4/Makefile.in
delete mode 100644 tests/Makefile.in
diff --git a/.gitignore b/.gitignore
index 81e5a98..fe65429 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,4 +1,7 @@
+aclocal.m4
+configure
autom4te.cache
+Makefile.in
Makefile
aclocal
automake
diff --git a/ChangeLog b/ChangeLog
index 18a0432..44c4444 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,42 @@
2011-12-22 Stefano Lattarini <address@hidden>
+ devel: help in comparing Makefile.in from different commits
+ Now that the generated Makefile.in, configure and aclocal.m4 files
+ are no longer committed in Automake's git repository, a simple
+ "git diff" or "git log" no longer shows if and how a change in
+ Automake results in changes to the Makefile.in files and/or
+ configure script of its own build system. Still, the ability to
+ peek so easily at such differences has proved itself quite useful
+ in the past, often revealing inconsistencies and blunders, and
+ sometimes even bugs; so it would be a pity to lose that altogether.
+ With this change, we add a new maintainer recipe that re-introduces
+ much of that capability, by generating and comparing on the fly the
+ Makefile.in, configure and aclocal.m4 derived from two arbitrary
+ commits of the Automake repository.
+ * Makefile.am (autodiffs, compare-autodiffs): New phony targets.
+
+2011-12-22 Stefano Lattarini <address@hidden>
+
+ repo: don't commit generated files in the git repository anymore
+ It has been quite some time since autoconf and libtool have stopped
+ committing the generated autotools files in their git repositories,
+ with no significant ill effects we're aware of. It's true that the
+ autoconf bootstrap process has now the minor annoyance that a
+ pre-installed autoconf is required to complete it; but luckily
+ automake will not have a similar annoyance, since our bootstrap
+ script take care, through some hoops, to use the very automake and
+ aclocal versions from the current git checkout to generate the
+ required aclocal.m4 and Makefile.in files. In fact, this has been
+ a necessity also in the past, because automake has been known to
+ use in its own build system new development features that hadn't
+ been present in any previously released automake distribution.
+ * .gitignore: Ignore configure, aclocal.m4, and all the
+ Makefile.in files.
+ * configure.ac (AC_PREREQ): New macro call, to require the
+ latest autoconf (2.68 for the moment).
+
+2011-12-22 Stefano Lattarini <address@hidden>
+
missing: don't try to re-run tar with a munged command line
* lib/missing: If the default `tar' program fails with the given
arguments, and GNU tar is not available, don't try to re-run the
diff --git a/Makefile.am b/Makefile.am
index d0dc846..b290925 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -606,6 +606,75 @@ path-check: distdir
rm -rf $(distdir); \
exit $$estatus
+## Visually comparing differences between the Makefile.in files in
+## automake's own build system as generated in two different branches
+## might help to catch bugs and blunders. This has already happened a
+## few times in the past, when we used to version-control Makefile.in.
+autodiffs:
+ @set -u; \
+ NEW_COMMIT=$${NEW_COMMIT-"HEAD"}; \
+ OLD_COMMIT=$${OLD_COMMIT-"HEAD~1"}; \
+ am_gitdir='$(abs_top_srcdir)/.git'; \
+ get_autofiles_from_rev () \
+ { \
+ rev=$$1 dir=$$2 \
+ && echo "$@: will get files from revision $$rev" \
+ && git clone -q --depth 1 "$$am_gitdir" tmp \
+ && cd tmp \
+ && git checkout -q "$$rev" \
+ && echo "$@: bootstrapping $$rev" \
+ && $(SHELL) ./bootstrap \
+ && echo "$@: copying files from $$rev" \
+ && makefile_ins=`find . -name Makefile.in` \
+ && (tar cf - configure aclocal.m4 $$makefile_ins) | \
+ (cd .. && cd "$$dir" && tar xf -) \
+ && cd .. \
+ && rm -rf tmp; \
+ }; \
+ address@hidden \
+## Before proceeding, ensure the specified revisions truly exist.
+ && git --git-dir="$$am_gitdir" describe $$OLD_COMMIT >/dev/null \
+ && git --git-dir="$$am_gitdir" describe $$NEW_COMMIT >/dev/null \
+ && rm -rf $$outdir \
+ && mkdir $$outdir \
+ && cd $$outdir \
+ && mkdir new old \
+ && get_autofiles_from_rev $$OLD_COMMIT old \
+ && get_autofiles_from_rev $$NEW_COMMIT new \
+ && exit 0
+## With lots of eye candy; we like our developers pampered and spoiled :-)
+compare-autodiffs: autodiffs
+ @set -u; \
+ : $${COLORDIFF=colordiff} $${DIFF=diff}; \
+ dir=autodiffs.dir; \
+ if test ! -d "$$dir"; then \
+ echo "$@: $$dir: Not a directory" >&2; \
+ exit 1; \
+ fi; \
+ mydiff=false mypager=false; \
+ if test -t 1; then \
+ if ($$COLORDIFF -r . .) </dev/null >/dev/null 2>&1; then \
+ mydiff=$$COLORDIFF; \
+ mypager="less -R"; \
+ else \
+ mypager=less; \
+ fi; \
+ else \
+ mypager=cat; \
+ fi; \
+ if test "$$mydiff" = false; then \
+ if ($$DIFF -r -u . .); then \
+ mydiff=$$DIFF; \
+ else \
+ echo "$@: no good-enough diff program specified" >&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ st=0; $$mydiff -r -u $$dir/old $$dir/new | $$mypager || st=$$?; \
+ rm -rf $$dir; \
+ exit $$st
+.PHONY: autodiffs compare-autodiffs
+
## Program to use to fetch files.
WGET = wget
WGET_SV_CVS = $(WGET) http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 3045353..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,1340 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS THANKS TODO
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(bindir)"
-SCRIPTS = $(bin_SCRIPTS)
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = lib . doc m4 tests
-bin_SCRIPTS = automake aclocal
-CLEANFILES = $(bin_SCRIPTS)
-AUTOMAKESOURCES = automake.in aclocal.in
-TAGS_FILES = $(AUTOMAKESOURCES)
-EXTRA_DIST = \
- ChangeLog.96 \
- ChangeLog.98 \
- ChangeLog.00 \
- ChangeLog.01 \
- ChangeLog.02 \
- ChangeLog.03 \
- ChangeLog.04 \
- ChangeLog.09 \
- bootstrap \
- $(AUTOMAKESOURCES)
-
-do_subst = sed \
- -e 's,address@hidden@],$(APIVERSION),g' \
- -e 's,address@hidden@],$(PACKAGE),g' \
- -e 's,address@hidden@],$(PACKAGE_BUGREPORT),g' \
- -e 's,address@hidden@],$(PACKAGE_URL),g' \
- -e 's,address@hidden@],$(PATH_SEPARATOR),g' \
- -e 's,address@hidden@],$(PERL),g' \
- -e 's,address@hidden@],$(PERL_THREADS),g' \
- -e 's,address@hidden@],$(SHELL),g' \
- -e 's,address@hidden@],$(am_AUTOCONF),g' \
- -e 's,address@hidden@],$(am_AUTOM4TE),g' \
- -e 's,address@hidden@],$(VERSION),g' \
- -e 's,address@hidden@],Generated from address@hidden; do not edit by
hand.,g' \
- -e 's,address@hidden@],$(datadir),g'
-
-
-# Some simple checks, and then ordinary check. These are only really
-# guaranteed to work on my machine.
-syntax_check_rules = \
-sc_test_names \
-sc_diff_automake_in_automake \
-sc_diff_aclocal_in_automake \
-sc_perl_syntax \
-sc_no_brace_variable_expansions \
-sc_rm_minus_f \
-sc_no_for_variable_in_macro \
-sc_mkinstalldirs \
-sc_pre_normal_post_install_uninstall \
-sc_perl_no_undef \
-sc_perl_no_split_regex_space \
-sc_cd_in_backquotes \
-sc_cd_relative_dir \
-sc_perl_at_uscore_in_scalar_context \
-sc_perl_local_no_parens \
-sc_perl_local \
-sc_AMDEP_TRUE_in_automake_in \
-sc_tests_make_without_am_makeflags \
-sc_tests_plain_make \
-sc_tests_plain_autoconf \
-sc_tests_plain_autoupdate \
-sc_tests_plain_automake \
-sc_tests_plain_autom4te \
-sc_tests_plain_autoheader \
-sc_tests_plain_autoreconf \
-sc_tests_here_document_format \
-sc_tests_Exit_not_exit \
-sc_tests_automake_fails \
-sc_tests_plain_aclocal \
-sc_tests_plain_perl \
-sc_tests_required_after_defs \
-sc_tests_overriding_macros_on_cmdline \
-sc_tests_plain_sleep \
-sc_tests_plain_egrep_fgrep \
-sc_tests_PATH_SEPARATOR \
-sc_mkdir_p \
-sc_perl_at_substs \
-sc_unquoted_DESTDIR \
-sc_tabs_in_texi \
-sc_at_in_texi
-
-m4_builtins = \
- __gnu__ \
- __unix__ \
- bpatsubst \
- bregexp \
- builtin \
- changecom \
- changequote \
- changeword \
- debugfile \
- debugmode \
- decr \
- define \
- defn \
- divert \
- divnum \
- dnl \
- dumpdef \
- errprint \
- esyscmd \
- eval \
- format \
- ifdef \
- ifelse \
- include \
- incr \
- index \
- indir \
- len \
- m4exit \
- m4wrap \
- maketemp \
- mkstemp \
- patsubst \
- popdef \
- pushdef \
- regexp \
- shift \
- sinclude \
- substr \
- symbols \
- syscmd \
- sysval \
- traceoff \
- traceon \
- translit \
- undefine \
- undivert
-
-WGET = wget
-WGET_SV_CVS = $(WGET) http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/
-WGET_SV_GIT_CF = $(WGET)
'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;hb=HEAD;f='
-WGET_SV_GIT_AC = $(WGET)
'http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob_plain;hb=HEAD;f='
-WGET_SV_GIT_GL = $(WGET)
'http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;hb=HEAD;f='
-WGET_GCC = $(WGET) 'http://gcc.gnu.org/viewcvs/*checkout*/trunk/'
-FETCHFILES = \
-INSTALL \
-config-ml.in \
-config.guess \
-config.sub \
-symlink-tree \
-texinfo.tex
-
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-install-binSCRIPTS: $(bin_SCRIPTS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit
$$?; \
- } \
- ; done
-
-uninstall-binSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=:
am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
- @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f
-print | \
- grep
'^...................................................................................................'
1>&2; then \
- echo 'error: the above filenames are too long' 1>&2; \
- exit 1; \
- else :; fi
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
- $(am__remove_distdir)
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c
>$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c
>$(distdir).tar.xz
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c
>$(distdir).tar.bz2
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e
's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base"
\
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(SCRIPTS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-binSCRIPTS
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binSCRIPTS
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-exec-am install-strip tags-recursive \
- uninstall-am
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
- distcheck distclean distclean-generic distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-binSCRIPTS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-exec-hook install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-binSCRIPTS \
- uninstall-hook
-
-
-install-exec-hook:
- @$(POST_INSTALL)
- @for p in $(bin_SCRIPTS); do \
- f="`echo $$p|sed '$(transform)'`"; \
- fv="$$f-$(APIVERSION)"; \
- rm -f $(DESTDIR)$(bindir)/$$fv; \
- echo " $(LN) $(DESTDIR)$(bindir)/$$f $(DESTDIR)$(bindir)/$$fv"; \
- $(LN) $(DESTDIR)$(bindir)/$$f $(DESTDIR)$(bindir)/$$fv; \
- done
-
-uninstall-hook:
- @for p in $(bin_SCRIPTS); do \
- f="`echo $$p|sed '$(transform)'`"; \
- fv="$$f-$(APIVERSION)"; \
- rm -f $(DESTDIR)$(bindir)/$$fv; \
- done
-
-automake: automake.in
-aclocal: aclocal.in
-automake aclocal: Makefile
- rm -f $@ address@hidden
- $(do_subst) $(srcdir)/address@hidden >address@hidden
- chmod +x address@hidden
- chmod a-w address@hidden
- mv -f address@hidden $@
-
-INSTALL: lib/INSTALL
- cp $(srcdir)/lib/INSTALL $@
-
-################################################################
-
-# Ensure tests are world-executable
-dist-hook:
- cd $(distdir)/tests && chmod a+rx *.test
-
-.PHONY: $(syntax_check_rules)
-$(syntax_check_rules): automake aclocal
-maintainer-check: $(syntax_check_rules)
-sc_test_names:
- @m4_builtin_rx=`echo $(m4_builtins) | sed 's/ /|/g'`; \
- m4_macro_rx="\\<($$m4_builtin_rx)\\>|\\<_?(A[CUMHS]|m4)_"; \
- if ls tests/*.test | LC_ALL=C grep -E "$$m4_macro_rx"; then \
- echo "the names of the tests above can be problematic" 1>&2; \
- echo "Avoid test names that contain names of m4 macros" 1>&2; \
- exit 1; \
- fi
-
-sc_diff_automake_in_automake:
- @if test `diff $(srcdir)/automake.in automake | wc -l` -ne 32; then \
- echo "found too many diffs between automake.in and automake" 1>&2; \
- diff -c $(srcdir)/automake.in automake; \
- exit 1; \
- fi
-sc_diff_aclocal_in_aclocal:
- @if test `diff $(srcdir)/aclocal.in aclocal | wc -l` -ne 34; then \
- echo "found too many diffs between aclocal.in and aclocal" 1>&2; \
- diff -c $(srcdir)/aclocal.in aclocal; \
- exit 1; \
- fi
-
-sc_perl_syntax:
- perllibdir="./lib$(PATH_SEPARATOR)$(srcdir)/lib" $(PERL) -c -w automake
- perllibdir="./lib$(PATH_SEPARATOR)$(srcdir)/lib" $(PERL) -c -w aclocal
-
-sc_no_brace_variable_expansions:
- @if grep -F '$${' $(srcdir)/lib/am/[a-z]*.am | \
- grep -F -v '$$$$'; then \
- echo "Found too many uses of '\$${' in the lines above." 1>&2; \
- exit 1; \
- else :; fi
-
-sc_rm_minus_f:
- @if grep -v '^#' $(srcdir)/lib/am/[a-z]*.am $(srcdir)/tests/*.test | \
- grep -E '\<rm ([^-]|\-[^f ]*\>)'; then \
- echo "Suspicious 'rm' invocation." 1>&2; \
- exit 1; \
- else :; fi
-
-sc_no_for_variable_in_macro:
- @if grep 'for .* in \$$(' $(srcdir)/lib/am/[a-z]*.am; then \
- echo 'Use "list=$$(mumble); for var in $$$$list".' 1>&2 ; \
- exit 1; \
- else :; fi
-
-sc_mkinstalldirs:
- @if grep -n 'mkinstalldirs' $(srcdir)/lib/am/[a-z]*.am | \
- grep -F -v '$$(mkinstalldirs)'; then \
- echo "Found incorrect use of mkinstalldirs in the lines above" 1>&2; \
- exit 1; \
- else :; fi
-
-sc_pre_normal_post_install_uninstall:
- @if grep -E -n '\((PRE|NORMAL|POST)_(|UN)INSTALL\)' \
- $(srcdir)/lib/am/[a-z]*.am | \
- grep -v ':##' | grep -v ': @\$$('; then \
- echo "Found incorrect use of PRE/NORMAL/POST_INSTALL/UNINSTALL in the
lines above" 1>&2; \
- exit 1; \
- else :; fi
-
-sc_perl_no_undef:
- @if grep -n -w 'undef ' $(srcdir)/automake.in | \
- grep -F -v 'undef $$/'; then \
- echo "Found undef in automake.in; use delete instead" 1>&2; \
- exit 1; \
- fi
-
-sc_perl_no_split_regex_space:
- @if grep -n 'split (/ /' $(srcdir)/automake.in; then \
- echo "Found bad split in the lines above." 1>&2; \
- exit 1; \
- fi
-
-sc_cd_in_backquotes:
- @if grep -n '^[^#]*` *cd ' $(srcdir)/automake.in \
- $(srcdir)/lib/am/*.am; then \
- echo "Consider using \$$(am__cd) in the lines above." 1>&2; \
- exit 1; \
- fi
-
-sc_cd_relative_dir:
- @if grep -n '^[^#]*cd ' $(srcdir)/automake.in \
- $(srcdir)/lib/am/*.am | \
- grep -v 'echo.*cd ' | \
- grep -v 'am__cd =' | \
- grep -v '^[^#]*cd [./]' | \
- grep -v '^[^#]*cd \$$(top_builddir)' | \
- grep -v '^[^#]*cd "\$$\$$am__cwd' | \
- grep -v '^[^#]*cd \$$(abs' | \
- grep -v '^[^#]*cd "\$$(DESTDIR)'; then \
- echo "Consider using \$$(am__cd) in the lines above." 1>&2; \
- exit 1; \
- fi
-
-sc_perl_at_uscore_in_scalar_context:
- @if grep -Hn 'address@hidden) ] *= address@hidden'
$(srcdir)/automake.in; then \
- echo "Using @_ in a scalar context in the lines above." 1>&2; \
- exit 1; \
- fi
-
-sc_perl_local_no_parens:
- @if grep '^[ \t]*local *(' $(srcdir)/automake.in; then \
- echo "Don't use \`local' with parens: use several \`local' above."
>&2; \
- exit 1; \
- fi
-
-sc_perl_local:
- @if egrep -v '^[ \t]*local \$$[_~]( *=|;)' $(srcdir)/automake.in | \
- grep '^[ \t]*local [^*]'; then \
- echo "Please avoid \`local'." 1>&2; \
- exit 1; \
- fi
-
-sc_AMDEP_TRUE_in_automake_in:
- @if grep '@AMDEP''_TRUE@' $(srcdir)/automake.in; then \
- echo "Don't put AMDEP_TRUE substitution in automake.in" 1>&2; \
- exit 1; \
- fi
-
-sc_tests_make_without_am_makeflags:
- @if grep '^[^#].*(MAKE) ' $(srcdir)/lib/am/*.am $(srcdir)/automake.in |\
- grep -v 'AM_MAKEFLAGS'; then \
- echo 'Use $$(MAKE) $$(AM_MAKEFLAGS).' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_make:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[ ]*make'; then \
- echo 'Do not run "make" in the above tests. Use "$$MAKE" instead.'
1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_autoconf:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[ ]*autoconf\>';
then \
- echo 'Do not run "autoconf" in the above tests. Use "$$AUTOCONF"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_autoupdate:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[
]*autoupdate\>'; then \
- echo 'Do not run "autoupdate" in the above tests. Use "$$AUTOUPDATE"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_automake:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep -E ':[
]*automake\>([^:]|$$)'; then \
- echo 'Do not run "automake" in the above tests. Use "$$AUTOMAKE"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_autoheader:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[
]*autoheader\>'; then \
- echo 'Do not run "automake" in the above tests. Use "$$AUTOHEADER"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_autoreconf:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[
]*autoreconf\>'; then \
- echo 'Do not run "automake" in the above tests. Use "$$AUTORECONF"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_autom4te:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[ ]*autom4te\>';
then \
- echo 'Do not run "automake" in the above tests. Use "$$AUTOM4TE"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_here_document_format:
- @if grep '<<' $(srcdir)/tests/*.test | grep -v 'END' | grep -v 'EOF';
then \
- echo 'Use here documents with "END" and "EOF" only, for
greppability.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_Exit_not_exit:
- @found=false; for file in $(srcdir)/tests/*.test; do \
- case $$file in */self-check-*.test) continue;; esac; \
- res=`sed -n -e '/^#/d; /^\$$PERL/d' -e '/<<.*END/,/^END/b' \
- -e '/<<.*EOF/,/^EOF/b' -e '/exit [$$0-9]/p' $$file`; \
- if test -n "$$res"; then \
- echo "$$file:$$res"; \
- found=true; \
- fi; \
- done; \
- if $$found; then \
- echo 'Do not call plain "exit", use "Exit" instead, in above tests.'
1>&2; \
- exit 1; \
- fi
-
-sc_tests_automake_fails:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep
'\$$AUTOMAKE.*&&.*[eE]xit'; then \
- echo 'Use AUTOMAKE_fails + grep to catch automake failures in the
above tests.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_aclocal:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[ ]*aclocal\>';
then \
- echo 'Do not run "aclocal" in the above tests. Use "$$ACLOCAL"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_perl:
- @if grep -v '^#' $(srcdir)/tests/*.test | grep ':[ ]*perl\>'; then
\
- echo 'Do not run "perl" in the above tests. Use "$$PERL" instead.'
1>&2; \
- exit 1; \
- fi
-
-sc_tests_required_after_defs:
- @for file in $(srcdir)/tests/*.test; do \
- if out=`sed -n '/defs/,$${/required=/p;}' $$file`; test -n "$$out";
then \
- echo 'Do not set "required" after sourcing "defs" in '"$$file:
$$out" 1>&2; \
- exit 1; \
- fi; \
- done
-
-sc_tests_overriding_macros_on_cmdline:
- @if grep -E '\$$MAKE .*(SHELL=.*=|=.*SHELL=)' $(srcdir)/tests/*.test;
then \
- echo 'Rewrite "$$MAKE foo=bar SHELL=$$SHELL" as "foo=bar $$MAKE -e
SHELL=$$SHELL"' 1>&2; \
- echo ' in the above lines, it is more portable.' 1>&2; \
- exit 1; \
- fi
- @if sed -e 's/ || .*//' -e 's/ && .*//' \
- -e 's/ DESTDIR=[^ ]*/ /' -e 's/ SHELL=[^ ]*/ /' \
- -e 's/ V=[^ ]*/ /' -e 's/ DISABLE_HARD_ERRORS=[^ ]*/ /' \
- -e "s/ DISTCHECK_CONFIGURE_FLAGS='[^']*'/ /" \
- -e 's/ DISTCHECK_CONFIGURE_FLAGS="[^"]*"/ /' \
- -e 's/ DISTCHECK_CONFIGURE_FLAGS=[^ ]/ /' \
- $(srcdir)/tests/*.test | grep '\$$MAKE .*='; then \
- echo 'Rewrite "$$MAKE foo=bar" as "foo=bar $$MAKE -e" in the above
lines,' 1>&2; \
- echo 'it is more portable.' 1>&2; \
- exit 1; \
- fi
- @if grep 'SHELL=.*\$$MAKE' $(srcdir)/tests/*.test; then \
- echo '$$MAKE ignores the SHELL envvar, use "$$MAKE SHELL=$$SHELL" in'
1>&2; \
- echo 'the above lines.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_sleep:
- @if grep -E '\bsleep +[12345]\b' $(srcdir)/tests/*.test; then \
- echo 'Do not use "sleep x" in the above tests. Use "$$sleep"
instead.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_plain_egrep_fgrep:
- @if grep -E '\b[ef]grep\b' $(srcdir)/tests/*.test ; then \
- echo 'Do not use egrep or fgrep in test cases. Use $$FGREP or
$$EGREP.' 1>&2; \
- exit 1; \
- fi
- @if grep -E '\b[ef]grep\b' $(srcdir)/lib/am/*.am $(srcdir)/m4/*.m4;
then \
- echo 'Do not use egrep or fgrep in the above files, they are not
portable.' 1>&2; \
- exit 1; \
- fi
-
-sc_tests_PATH_SEPARATOR:
- @if grep -E '\bPATH=.*:.*' $(srcdir)/tests/*.test ; then \
- echo "Use \`\$$PATH_SEPARATOR', not \`:', in PATH definitions above."
1>&2; \
- exit 1; \
- fi
-
-sc_mkdir_p:
- @if grep 'mkdir_p' $(srcdir)/automake.in \
- $(srcdir)/lib/am/*.am $(srcdir)/tests/*.test; then \
- echo 'Do not use mkdir_p in the above files, use MKDIR_P.' 1>&2; \
- exit 1; \
- fi
-
-sc_perl_at_substs:
- @if test `grep -E 'address@hidden@' aclocal | wc -l` -ne 0; then \
- echo "Unresolved @...@ substitution in aclocal" 1>&2; \
- exit 1; \
- fi
- @if test `grep -E 'address@hidden@' automake | wc -l` -ne 0; then \
- echo "Unresolved @...@ substitution in automake" 1>&2; \
- exit 1; \
- fi
-
-sc_unquoted_DESTDIR:
- @if grep -E "[^\'\"]\\\$$\(DESTDIR" $(srcdir)/lib/am/*.am; then \
- echo 'Suspicious unquoted DESTDIR uses.' 1>&2 ; \
- exit 1; \
- fi
-
-sc_tabs_in_texi:
- @if grep ' ' $(srcdir)/doc/automake.texi; then \
- echo 'Do not use tabs in the manual.' 1>&2; \
- exit 1; \
- fi
-
-sc_at_in_texi:
- @if grep -E '(address@hidden|^)@([ address@hidden|$$)'
$(srcdir)/doc/automake.texi; \
- then \
- echo 'Unescaped @.' 1>&2; \
- exit 1; \
- fi
-
-git-dist: maintainer-check
- @if sed 1q $(srcdir)/NEWS | grep -e "$(VERSION)" > /dev/null; then :;
else \
- echo "NEWS not updated; not releasing" 1>&2; \
- exit 1; \
- fi
- $(MAKE) $(AM_MAKEFLAGS) dist
- cd $(srcdir) && git commit -a -s && \
- git tag -s "v$(VERSION)" -m "Release $(VERSION)"
-
-git-release: git-dist
- case $(VERSION) in \
- *[a-z]) dest=alpha;; \
- *) dest=ftp;; \
- esac; \
- $(srcdir)/lib/gnupload $(GNUPLOADFLAGS) \
- --to $$dest.gnu.org:automake $(DIST_ARCHIVES)
-
-git-diff:
- thisver="v$(VERSION)"; \
- if test -z "$$OLDVERSION"; then \
- prevno=`echo "$(VERSION)" - 0.01 | bc | sed 's/^\./0./'`; \
- else prevno="$$OLDVERSION"; fi; \
- prevver=v$$prevno; \
- git diff $$prevver..$$thisver $(PACKAGE) \
- > $(PACKAGE)-$$prevno-$(VERSION).diff
-
-path-check: distdir
- (cd $(distdir) && \
- find . -print | xargs pathchk -p); \
- estatus=$$?; \
- find $(distdir) -type d '!' -perm -200 -exec chmod u+w {} ';'; \
- rm -rf $(distdir); \
- exit $$estatus
-
-fetch:
- rm -rf Fetchdir > /dev/null 2>&1
- mkdir Fetchdir
- (cd Fetchdir && \
- $(WGET_SV_GIT_CF)config.guess -O config.guess && \
- $(WGET_SV_GIT_CF)config.sub -O config.sub && \
- $(WGET_SV_CVS)texinfo/texinfo/doc/texinfo.tex -O texinfo.tex && \
- $(WGET_SV_GIT_GL)doc/INSTALL -O INSTALL && \
- $(WGET_GCC)config-ml.in -O config-ml.in && \
- $(WGET_GCC)symlink-tree -O symlink-tree)
- @stat=0; for file in $(FETCHFILES); do \
- if diff -u $(srcdir)/lib/$$file Fetchdir/$$file \
- >>Fetchdir/update.patch 2>/dev/null; then :; \
- else \
- stat=1; \
- echo "Updating $(srcdir)/lib/$$file..."; \
- cp Fetchdir/$$file $(srcdir)/lib/$$file; \
- fi; \
- done; \
- test $$stat = 0 || \
- echo "See Fetchdir/update.patch for a log of the changes."; \
- exit $$stat
-
-release-stats: ps
- @am=`wc -l < automake` && \
- acl=`wc -l < aclocal` && \
- pmfiles="lib/Automake/*.pm" && \
- if test . != '$(srcdir)'; then pmfiles="$$pmfiles
$(srcdir)/lib/Automake/*.pm"; \
- else :; fi && \
- pm=`cat $$pmfiles | wc -l` && \
- dot_am_files=`ls -1 $(srcdir)/lib/am/*.am | grep -v Makefile.am` && \
- amf=`echo "$$dot_am_files" | wc -l` && \
- aml=`cat $$dot_am_files | wc -l` && \
- m4f=`ls -1 $(srcdir)/m4/*.m4 | wc -l` && \
- m4l=`cat $(srcdir)/m4/*.m4 | wc -l` && \
- doc_text=`cd doc && LC_ALL=C pstops 0 automake.ps unused.ps 2>&1` && \
- echo "$$doc_text" && \
- rm -f doc/unused.ps && \
- doc=`echo "$$doc_text" | sed -n 's/.*Wrote \([1-9][0-9]*\)
pages.*/\1/p'` && \
- tests="tests/*.test"; \
- if test . != '$(srcdir)'; then tests="$$tests $(srcdir)/tests/*.test"; \
- else :; fi && \
- t=`ls -1 $$tests | wc -l` && \
- tgen=`ls -1 $$tests | grep '.-p\.test' | wc -l` && \
- today=`date +%Y-%m-%d` && \
- echo "add this to the table in doc/automake.texi after verification:"
&& \
- printf '@item %s @tab %-6s @tab %4d @tab %4d @tab %4d @tab %4d %-4s
@tab %4d %-4s @tab %3d @tab %d %-4s\n' \
- $$today $(VERSION) $$am $$acl $$pm $$aml
"($$amf)" $$m4l "($$m4f)" $$doc $$t "($$tgen)"
-.PHONY: release-stats
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index f60cbdb..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,35 +0,0 @@
-# generated automatically by aclocal 1.11 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically
`autoreconf'.])])
-
-m4_include([m4/amversion.m4])
-m4_include([m4/auxdir.m4])
-m4_include([m4/init.m4])
-m4_include([m4/install-sh.m4])
-m4_include([m4/lead-dot.m4])
-m4_include([m4/missing.m4])
-m4_include([m4/mkdirp.m4])
-m4_include([m4/options.m4])
-m4_include([m4/runlog.m4])
-m4_include([m4/sanity.m4])
-m4_include([m4/strip.m4])
-m4_include([m4/substnot.m4])
-m4_include([m4/tar.m4])
diff --git a/configure b/configure
deleted file mode 100755
index 7f3a0db..0000000
--- a/configure
+++ /dev/null
@@ -1,3980 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for GNU Automake 1.11.
-#
-# Report bugs to <address@hidden>.
-#
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo";
then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh)
>/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"address@hidden"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
- as_suggested="
as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" =
\"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null;
then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" |
as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell address@hidden and
-$0: address@hidden about your system, including any
-$0: error possibly output before this message. Then install
-$0: a modern shell, or manually run the script under such a
-$0: shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2; as_fn_exit 1; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='GNU Automake'
-PACKAGE_TARNAME='automake'
-PACKAGE_VERSION='1.11'
-PACKAGE_STRING='GNU Automake 1.11'
-PACKAGE_BUGREPORT='address@hidden'
-PACKAGE_URL='http://www.gnu.org/software/automake/'
-
-ac_unique_file="automake.in"
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-sh_errexit_works
-FGREP
-EGREP
-GREP
-MODIFICATION_DELAY
-LN
-HELP2MAN
-TEX
-PERL_THREADS
-PERL
-pkgvdatadir
-APIVERSION
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-am_AUTOUPDATE
-am_AUTOHEADER
-am_AUTORECONF
-am_AUTOM4TE
-am_AUTOCONF
-build_os
-build_vendor
-build_cpu
-build
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *)
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option}
${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options:
$ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't
use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures GNU Automake 1.11 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/automake]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of GNU Automake 1.11:";;
- esac
- cat <<\_ACEOF
-
-Report bugs to <address@hidden>.
-GNU Automake home page: <http://www.gnu.org/software/automake/>.
-General help using GNU software: <http://www.gnu.org/gethelp/>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed
's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir"
>&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-GNU Automake configure 1.11
-generated by GNU Autoconf 2.68
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by GNU Automake $as_me 1.11, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n
'\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script
$ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to
\`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set
in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has
changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace
changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the
previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value:
\`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value:
\`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment
can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start
over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext
$LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-ac_aux_dir=
-for ac_dir in lib "$srcdir"/lib; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in lib
\"$srcdir\"/lib" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
"$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-
-# Save the AUTOCONF setting before AM_INIT_AUTOMAKE overrides it; this
-# way we can run Autoconf tests from configure (or from the test
-# suite) without being bothered by `missing'. Likewise for autom4te,
-# autoreconf, autoheader, and autoupdate.
-am_AUTOCONF="${AUTOCONF-autoconf}"
-
-am_AUTOM4TE="${AUTOM4TE-autom4te}"
-
-am_AUTORECONF="${AUTORECONF-autoreconf}"
-
-am_AUTOHEADER="${AUTOHEADER-autoheader}"
-
-am_AUTOUPDATE="${AUTOUPDATE-autoupdate}"
-
-
-am__api_version='1.11'
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible
install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
"$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two
"`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is
sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- for am_try in 1 2; do
- echo timestamp > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
- alias in your environment" "$LINENO" 5
- fi
- if test "$2" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- done
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too
old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program
name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not
prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet"
>&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p"
>&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
"$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with
args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets
\$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make
distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='automake'
- VERSION='1.11'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-
-# The API version is the base version. We must guarantee
-# compatibility for all releases with the same API version.
-# Our current rule is that:
-# * All releases, including the prereleases, in an X.Y series
-# are compatible. So 1.5.1c is compatible with 1.5.
-# * Prereleases on the trunk are all incompatible -- 1.5b and 1.5c
-# aren't the same.
-APIVERSION=`echo "$VERSION" | sed -e 's/^\([0-9]*\.[0-9]*[a-z]*\).*$/\1/'`
-
-
-# A versioned directory, defined here for convenience.
-pkgvdatadir="\${datadir}/$PACKAGE-$APIVERSION"
-
-
-# $AUTOMAKE and $ACLOCAL are always run after a `cd $top_srcdir',
-# hence `.' is really what we want for perllibdir, libdir, and acdir.
-ACLOCAL="perllibdir=\"`pwd`/lib$PATH_SEPARATOR./lib\" \"`pwd`/aclocal\"
--acdir=m4 -I m4"
-AUTOMAKE="perllibdir=\"`pwd`/lib$PATH_SEPARATOR./lib\" \"`pwd`/automake\"
--libdir=lib"
-
-# Extract the first word of "perl", so it can be a program name with args.
-set dummy perl; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PERL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PERL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-if test -n "$PERL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
-$as_echo "$PERL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-if test -z "$PERL"; then
- as_fn_error $? "perl not found" "$LINENO" 5
-fi
-# Save details about the selected perl interpreter in config.log.
-{ echo "$as_me:$LINENO: eval $PERL --version" >&5
- (eval $PERL --version) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-$PERL -e 'require 5.006;' || {
- as_fn_error $? "perl 5.6 or better is required; perl 5.8.2 or better
-is recommended. If you have several perl versions
-installed, select the one Automake should use using
- ./configure PERL=/path/to/perl" "$LINENO" 5
-}
-
-# We require ithreads support, and version 5.7.2 for CLONE.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $PERL supports
ithreads" >&5
-$as_echo_n "checking whether $PERL supports ithreads... " >&6; }
-if ${am_cv_prog_PERL_ithreads+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if $PERL -e '
- require 5.007_002;
- use Config;
- if ($Config{useithreads})
- {
- require threads;
- import threads;
- require Thread::Queue;
- import Thread::Queue;
- exit 0;
- }
- exit 1;' >&5 2>&1
-then
- am_cv_prog_PERL_ithreads=yes
-else
- am_cv_prog_PERL_ithreads=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_PERL_ithreads" >&5
-$as_echo "$am_cv_prog_PERL_ithreads" >&6; }
-if test $am_cv_prog_PERL_ithreads = yes; then
- PERL_THREADS=1;
-else
- PERL_THREADS=0;
-fi
-
-
-# The test suite will skip some tests if tex is absent.
-# Extract the first word of "tex", so it can be a program name with args.
-set dummy tex; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_TEX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$TEX"; then
- ac_cv_prog_TEX="$TEX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_TEX="tex"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-TEX=$ac_cv_prog_TEX
-if test -n "$TEX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEX" >&5
-$as_echo "$TEX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-# Generate man pages.
-
-HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"}
-
-
-# Test for Autoconf. We run Autoconf in a subdirectory to ease
-# deletion of any files created (such as those added to
-# autom4te.cache). We used to perform only the last of the three
-# following tests, but some users were unable to figure out that their
-# installation was broken since --version appeared to work.
-
-required_autoconf_version=2.62
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is
installed" >&5
-$as_echo_n "checking whether autoconf is installed... " >&6; }
-if ${am_cv_autoconf_installed+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if { echo "$as_me:$LINENO: eval $am_AUTOCONF --version" >&5
- (eval $am_AUTOCONF --version) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
-then
- am_cv_autoconf_installed=yes
-else
- am_cv_autoconf_installed=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_installed" >&5
-$as_echo "$am_cv_autoconf_installed" >&6; }
-if test "$am_cv_autoconf_installed" = no; then
- as_fn_error $? "Autoconf $required_autoconf_version or better is required.
- Please make sure it is installed and in your PATH." "$LINENO" 5
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf works" >&5
-$as_echo_n "checking whether autoconf works... " >&6; }
-if ${am_cv_autoconf_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- mkdir conftest
-echo 'AC''_INIT' > conftest/conftest.ac
-if { echo "$as_me:$LINENO: cd conftest && eval $am_AUTOCONF -o /dev/null
conftest.ac" >&5
- (cd conftest && eval $am_AUTOCONF -o /dev/null conftest.ac) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
-then
- am_cv_autoconf_works=yes
-else
- am_cv_autoconf_works=no
-fi
-rm -rf conftest
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_works" >&5
-$as_echo "$am_cv_autoconf_works" >&6; }
-if test "$am_cv_autoconf_works" = no; then
- as_fn_error $? "The installed version of autoconf does not work.
- Please check config.log for error messages before this one." "$LINENO" 5
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is recent
enough" >&5
-$as_echo_n "checking whether autoconf is recent enough... " >&6; }
-if ${am_cv_autoconf_version+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- mkdir conftest
-echo 'AC'"_PREREQ([$required_autoconf_version])" > conftest/conftest.ac
-if { echo "$as_me:$LINENO: cd conftest && eval $am_AUTOCONF -o /dev/null
conftest.ac" >&5
- (cd conftest && eval $am_AUTOCONF -o /dev/null conftest.ac) >&5 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); };
-then
- am_cv_autoconf_version=yes
-else
- am_cv_autoconf_version=no
-fi
-rm -rf conftest
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_version" >&5
-$as_echo "$am_cv_autoconf_version" >&6; }
-if test "$am_cv_autoconf_version" = no; then
- as_fn_error $? "Autoconf $required_autoconf_version or better is required."
"$LINENO" 5
-fi
-
-# Test for ln. We need use it to install the versioned binaries.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln works" >&5
-$as_echo_n "checking whether ln works... " >&6; }
-if ${am_cv_prog_ln+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
-rm -f conftest conftest.file
-: >conftest.file
-if ln conftest.file conftest 2>/dev/null; then
- am_cv_prog_ln=ln
-else
- am_cv_prog_ln='cp -p'
-fi
-rm -f conftest conftest.file
-fi
-
-LN=$am_cv_prog_ln
-
-result=no
-test "x$am_cv_prog_ln" = xln && result=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $result" >&5
-$as_echo "$result" >&6; }
-
-# The amount we should wait after modifying files depends on the platform.
-# On Windows '95, '98 and ME, files modifications have 2-seconds
-# granularity and can be up to 3 seconds in the future w.r.t. the
-# system clock. When it is important to ensure one file is older
-# than another we wait at least 5 seconds between creations.
-case $build in
- *-pc-msdosdjgpp) MODIFICATION_DELAY=5;;
- *) MODIFICATION_DELAY=2;;
-esac
-
-
-# Test for things needed by the test suite.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long
lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl"
>"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null ||
break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
- then ac_cv_path_FGREP="$GREP -F"
- else
- if test -z "$FGREP"; then
- ac_path_FGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
- # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'FGREP' >> "conftest.nl"
- "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_FGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_FGREP="$ac_path_FGREP"
- ac_path_FGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_FGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_FGREP"; then
- as_fn_error $? "no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_FGREP=$FGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether /bin/sh has working
'set -e' with exit trap" >&5
-$as_echo_n "checking whether /bin/sh has working 'set -e' with exit trap... "
>&6; }
-if ${am_cv_sh_errexit_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if /bin/sh -ec "trap 'exit \$?' 0; (exit 77); exit 77"; test $? = 77
-then
- am_cv_sh_errexit_works=yes
-else
- am_cv_sh_errexit_works=no
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_sh_errexit_works" >&5
-$as_echo "$am_cv_sh_errexit_works" >&6; }
-if test $am_cv_sh_errexit_works = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`${MAKE-make} check' will
leave leftover directories tests/*.dir" >&5
-$as_echo "$as_me: WARNING: \`${MAKE-make} check' will leave leftover
directories tests/*.dir" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: you can clean them up
manually using \`${MAKE-make} clean' or" >&5
-$as_echo "$as_me: WARNING: you can clean them up manually using \`${MAKE-make}
clean' or" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`cd tests && ${MAKE-make}
clean-local-check'" >&5
-$as_echo "$as_me: WARNING: \`cd tests && ${MAKE-make} clean-local-check'" >&2;}
- fi
-sh_errexit_works=$am_cv_sh_errexit_works
-
-
-ac_config_files="$ac_config_files Makefile doc/Makefile lib/Automake/Makefile
lib/Automake/tests/Makefile lib/Makefile lib/am/Makefile m4/Makefile
tests/Makefile tests/defs"
-
-ac_config_files="$ac_config_files tests/aclocal-${APIVERSION}:tests/aclocal.in"
-
-ac_config_files="$ac_config_files
tests/automake-${APIVERSION}:tests/automake.in"
-
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`;
do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache
$cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[
]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[
]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo";
then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by GNU Automake $as_me 1.11, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <address@hidden>.
-GNU Automake home page: <http://www.gnu.org/software/automake/>.
-General help using GNU software: <http://www.gnu.org/gethelp/>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-GNU Automake config.status 1.11
-configured by $0, generated by GNU Autoconf 2.68,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create
--no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-APIVERSION=$APIVERSION
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
- "lib/Automake/Makefile") CONFIG_FILES="$CONFIG_FILES
lib/Automake/Makefile" ;;
- "lib/Automake/tests/Makefile") CONFIG_FILES="$CONFIG_FILES
lib/Automake/tests/Makefile" ;;
- "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
- "lib/am/Makefile") CONFIG_FILES="$CONFIG_FILES lib/am/Makefile" ;;
- "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
- "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
- "tests/defs") CONFIG_FILES="$CONFIG_FILES tests/defs" ;;
- "tests/aclocal-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/aclocal-${APIVERSION}:tests/aclocal.in" ;;
- "tests/automake-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/automake-${APIVERSION}:tests/automake.in" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X " :F $CONFIG_FILES "
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be
DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;;
esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed
's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to
ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir
setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a
reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
- esac
-
-
- case $ac_file$ac_mode in
- "tests/aclocal-${APIVERSION}":F) chmod +x tests/aclocal-${APIVERSION} ;;
- "tests/automake-${APIVERSION}":F) chmod +x tests/automake-${APIVERSION} ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no;
then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/configure.ac b/configure.ac
index b01026d..4c0cc23 100644
--- a/configure.ac
+++ b/configure.ac
@@ -16,6 +16,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
+AC_PREREQ([2.68])
AC_INIT([GNU Automake], [1.11], address@hidden)
m4_ifndef([AC_PACKAGE_URL],
diff --git a/doc/Makefile.in b/doc/Makefile.in
deleted file mode 100644
index fb72eb4..0000000
--- a/doc/Makefile.in
+++ /dev/null
@@ -1,847 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 2003, 2006, 2008, 2009 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = doc
-DIST_COMMON = $(automake_TEXINFOS) $(dist_doc_DATA) $(dist_man1_MANS) \
- $(dist_noinst_DATA) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
- $(srcdir)/version.texi
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-INFO_DEPS = $(srcdir)/automake.info
-TEXINFO_TEX = $(top_srcdir)/lib/texinfo.tex
-am__TEXINFO_TEX_DIR = $(top_srcdir)/lib
-DVIS = automake.dvi
-PDFS = automake.pdf
-PSS = automake.ps
-HTMLS = automake.html
-TEXINFOS = automake.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
- "$(DESTDIR)$(docdir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(dist_man1_MANS)
-DATA = $(dist_doc_DATA) $(dist_noinst_DATA)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-info_TEXINFOS = automake.texi
-automake_TEXINFOS = fdl.texi
-dist_man1_MANS = \
- $(srcdir)/aclocal.1 \
- $(srcdir)/automake.1 \
- $(srcdir)/aclocal-$(APIVERSION).1 \
- $(srcdir)/automake-$(APIVERSION).1
-
-MAINTAINERCLEANFILES = $(dist_man1_MANS)
-update_mans = \
- PATH="`pwd`/../tests$(PATH_SEPARATOR)$$PATH" && \
- export PATH && \
- $(HELP2MAN) --output=$@
-
-
-# The following requires a fixed version of the Emacs 19.30 etags.
-ETAGS_ARGS = --lang=none \
- --regex='/address@hidden \t]+\([^,]+\)/\1/' $(srcdir)/automake.texi
-
-TAGS_DEPENDENCIES = automake.texi
-amhello_sources = \
- amhello/configure.ac \
- amhello/Makefile.am \
- amhello/README \
- amhello/src/main.c \
- amhello/src/Makefile.am
-
-amhello_configury = \
- aclocal.m4 \
- autom4te.cache \
- Makefile.in \
- config.h.in \
- configure \
- depcomp \
- install-sh \
- missing \
- src/Makefile.in
-
-dist_noinst_DATA = $(amhello_sources)
-dist_doc_DATA = $(srcdir)/amhello-1.0.tar.gz
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-.texi.info:
- restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && $(am__cd) $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ address@hidden address@hidden $(@:.info=).i[0-9]
$(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- $(am__cd) $(srcdir); \
- else \
- rc=$$?; \
- $(am__cd) $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I
$(srcdir)' \
- $(TEXI2DVI) $<
-
-.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I
$(srcdir)' \
- $(TEXI2PDF) $<
-
-.texi.html:
- rm -rf $(@:.html=.htp)
- if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I
$(srcdir) \
- -o $(@:.html=.htp) $<; \
- then \
- rm -rf $@; \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
- else \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
- exit 1; \
- fi
-$(srcdir)/automake.info: automake.texi $(srcdir)/version.texi
$(automake_TEXINFOS)
-automake.dvi: automake.texi $(srcdir)/version.texi $(automake_TEXINFOS)
-automake.pdf: automake.texi $(srcdir)/version.texi $(automake_TEXINFOS)
-automake.html: automake.texi $(srcdir)/version.texi $(automake_TEXINFOS)
-$(srcdir)/version.texi: $(srcdir)/stamp-vti
-$(srcdir)/stamp-vti: automake.texi $(top_srcdir)/configure
- @(dir=.; test -f ./automake.texi || dir=$(srcdir); \
- set `$(SHELL) $(top_srcdir)/lib/mdate-sh $$dir/automake.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp $(srcdir)/version.texi \
- || (echo "Updating $(srcdir)/version.texi"; \
- cp vti.tmp $(srcdir)/version.texi)
- address@hidden -f vti.tmp
- @cp $(srcdir)/version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
- -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-.dvi.ps:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) -o $@ $<
-
-uninstall-dvi-am:
- @$(NORMAL_UNINSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
- rm -f "$(DESTDIR)$(dvidir)/$$f"; \
- done
-
-uninstall-html-am:
- @$(NORMAL_UNINSTALL)
- @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
- rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
- done
-
-uninstall-info-am:
- @$(PRE_UNINSTALL)
- @if test -d '$(DESTDIR)$(infodir)' && \
- (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian)
>/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove
'$(DESTDIR)$(infodir)/$$relfile'"; \
- if install-info --info-dir="$(DESTDIR)$(infodir)" --remove
"$(DESTDIR)$(infodir)/$$relfile"; \
- then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1;
fi; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then
\
- echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile
$$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9]
$$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-uninstall-pdf-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-uninstall-ps-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
- rm -f "$(DESTDIR)$(psdir)/$$f"; \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9]
$$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
- if test -f $$file; then \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f "$(distdir)/$$relfile" || \
- cp -p $$file "$(distdir)/$$relfile"; \
- else :; fi; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf automake.ac automake.aux automake.cm automake.cp automake.cps \
- automake.fn automake.fns automake.ky automake.kys \
- automake.log automake.op automake.pg automake.pgs \
- automake.tmp automake.toc automake.tp automake.tps \
- automake.tr automake.vr automake.vrs
-
-clean-aminfo:
- -test -z "automake.dvi automake.pdf automake.ps automake.html" \
- || rm -rf automake.dvi automake.pdf automake.ps automake.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9]
$$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-install-man1: $(dist_man1_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
- { for i in $$list; do echo "$$i"; done; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?;
\
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-install-dist_docDATA: $(dist_doc_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
- done
-
-uninstall-dist_docDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list
>/dev/null; then \
- echo "error: found man pages containing the \`missing help2man'
replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list |
sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate
the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them"
>&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(MANS) $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
"$(DESTDIR)$(docdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS)
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-dist_docDATA install-info-am install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
- @$(NORMAL_INSTALL)
- test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
- done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- d2=$$d$$p; \
- if test -d "$$d2"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
- else \
- list2="$$list2 $$d2"; \
- fi; \
- done; \
- test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
- done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- echo "$$ifile"; \
- else : ; fi; \
- done; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
- @$(POST_INSTALL)
- @am__run_installinfo=yes; \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) am__run_installinfo=no;; \
- *) (install-info --version) >/dev/null 2>&1 \
- || am__run_installinfo=no;; \
- esac; \
- if test $$am__run_installinfo = yes; then \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)'
'$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)"
"$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
- @$(NORMAL_INSTALL)
- test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dist_docDATA uninstall-dvi-am \
- uninstall-html-am uninstall-info-am uninstall-man \
- uninstall-pdf-am uninstall-ps-am
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-aminfo \
- clean-generic ctags dist-info distclean distclean-generic \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-dist_docDATA install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-aminfo maintainer-clean-generic \
- maintainer-clean-vti mostlyclean mostlyclean-aminfo \
- mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am tags \
- uninstall uninstall-am uninstall-dist_docDATA uninstall-dvi-am \
- uninstall-html-am uninstall-info-am uninstall-man \
- uninstall-man1 uninstall-pdf-am uninstall-ps-am
-
-$(dist_man1_MANS): $(top_srcdir)/configure.ac
-$(srcdir)/aclocal.1 $(srcdir)/automake.1:
- f=`echo $@ | sed 's|.*/||; s|\.1$$||; $(transform)'`; \
- echo ".so man1/$$f-$(APIVERSION).1" > $@
-$(srcdir)/aclocal-$(APIVERSION).1: $(srcdir)/../aclocal.in
- $(update_mans) aclocal-$(APIVERSION)
-$(srcdir)/automake-$(APIVERSION).1: $(srcdir)/../automake.in
- $(update_mans) automake-$(APIVERSION)
-
-# We depend on configure.ac so that we regenerate the tarball
-# whenever the Automake version changes.
-# aclocal-$(APIVERSION) and automake-$(APIVERSION) are generated by
-# configure in tests/.
-$(srcdir)/amhello-1.0.tar.gz: $(amhello_sources) $(top_srcdir)/configure.ac
- PATH="`pwd`/../tests$(PATH_SEPARATOR)$$PATH" && \
- export PATH && \
- cd $(srcdir)/amhello && \
- ACLOCAL=aclocal-$(APIVERSION) && export ACLOCAL && \
- AUTOMAKE=automake-$(APIVERSION) && export AUTOMAKE && \
- AUTOCONF='$(am_AUTOCONF)' && export AUTOCONF && \
- AUTOM4TE='$(am_AUTOM4TE)' && export AUTOM4TE && \
- AUTORECONF='$(am_AUTORECONF)' && export AUTORECONF && \
- AUTOHEADER='$(am_AUTOHEADER)' && export AUTOHEADER && \
- AUTOUPDATE='$(am_AUTOUPDATE)' && export AUTOUPDATE && \
- $(am_AUTORECONF) -vfi && \
- ./configure && \
- $(MAKE) $(AM_MAKEFLAGS) distcheck && \
- $(MAKE) $(AM_MAKEFLAGS) distclean && \
- rm -rf $(amhello_configury) && \
- mv amhello-1.0.tar.gz ..
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
deleted file mode 100644
index cdeeb9b..0000000
--- a/lib/Automake/Makefile.in
+++ /dev/null
@@ -1,671 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 2001, 2002, 2003, 2004, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = lib/Automake
-DIST_COMMON = $(dist_perllib_DATA) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"
-DATA = $(dist_perllib_DATA) $(nodist_perllib_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# `make clean check' should build Config.pm first.
-SUBDIRS = . tests
-perllibdir = $(pkgvdatadir)/Automake
-dist_perllib_DATA = \
- ChannelDefs.pm \
- Channels.pm \
- Condition.pm \
- Configure_ac.pm \
- DisjConditions.pm \
- FileUtils.pm \
- General.pm \
- Item.pm \
- ItemDef.pm \
- Location.pm \
- Options.pm \
- Rule.pm \
- RuleDef.pm \
- Struct.pm \
- Variable.pm \
- VarDef.pm \
- Version.pm \
- XFile.pm \
- Wrap.pm
-
-nodist_perllib_DATA = \
- Config.pm
-
-CLEANFILES = $(nodist_perllib_DATA)
-do_subst = in=`echo $@ | sed 's/\.[^.]*$$//'`; sed \
- -e 's,address@hidden@],$(APIVERSION),g' \
- -e 's,address@hidden@],$(PACKAGE),g' \
- -e 's,address@hidden@],$(PACKAGE_BUGREPORT),g' \
- -e 's,address@hidden@],$(PERL),g' \
- -e 's,address@hidden@],$(PERL_THREADS),g' \
- -e 's,address@hidden@],$(SHELL),g' \
- -e 's,address@hidden@],$(VERSION),g' \
- -e "s,address@hidden@],Generated from $$in.in; do not edit by hand.,g" \
- -e 's,address@hidden@],$(datadir),g'
-
-EXTRA_DIST = Config.in
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Automake/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/Automake/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_perllibDATA: $(dist_perllib_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
- @list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(perllibdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(perllibdir)" || exit $$?; \
- done
-
-uninstall-dist_perllibDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
-install-nodist_perllibDATA: $(nodist_perllib_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
- @list='$(nodist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(perllibdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(perllibdir)" || exit $$?; \
- done
-
-uninstall-nodist_perllibDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(nodist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=:
am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_perllibDATA install-nodist_perllibDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_perllibDATA uninstall-nodist_perllibDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic ctags \
- ctags-recursive distclean distclean-generic distclean-tags \
- distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am \
- install-dist_perllibDATA install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man \
- install-nodist_perllibDATA install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-dist_perllibDATA uninstall-nodist_perllibDATA
-
-
-Config.pm: Config.in Makefile
- rm -f Config.tmp Config.pm
- $(do_subst) $(srcdir)/Config.in >Config.tmp
- chmod +x Config.tmp
- chmod a-w Config.tmp
- mv -f Config.tmp Config.pm
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/Automake/tests/Makefile.in b/lib/Automake/tests/Makefile.in
deleted file mode 100644
index 06f6ceb..0000000
--- a/lib/Automake/tests/Makefile.in
+++ /dev/null
@@ -1,616 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 2002, 2003, 2008, 2009 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = lib/Automake/tests
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-# If stdout is a non-dumb tty, use colors. If test -t is not supported,
-# then this fails; a conservative approach. Of course do not redirect
-# stdout here, just stderr.
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=; \
-test "X$(AM_COLOR_TESTS)" != Xno \
-&& test "X$$TERM" != Xdumb \
-&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
-&& { \
- red='[0;31m'; \
- grn='[0;32m'; \
- lgn='[1;32m'; \
- blu='[1;34m'; \
- std='[m'; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-# Restructured Text title and section.
-am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
-am__rst_section = sed 'p;s/./=/g;p;g'
-# Put stdin (possibly several lines separated by ". ") in a box.
-# Prefix each line by 'col' and terminate each with 'std', for coloring.
-# Multi line coloring is problematic with "less -R", so we really need
-# to color each line individually.
-am__text_box = $(AWK) '{ \
- n = split($$0, lines, "\\. "); max = 0; \
- for (i = 1; i <= n; ++i) \
- if (max < length(lines[i])) \
- max = length(lines[i]); \
- for (i = 0; i < max; ++i) \
- line = line "="; \
- print col line std; \
- for (i = 1; i <= n; ++i) \
- if (lines[i]) \
- print col lines[i] std; \
- print col line std; \
-}'
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# To be inserted before the command running the test. Creates the
-# directory for the log if needed. Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log, and passes
-# TESTS_ENVIRONMENT. Save and restore TERM around use of
-# TESTS_ENVIRONMENT, in case that unsets it.
-am__check_pre = \
-$(am__sh_e_setup); \
-$(am__vpath_adj_setup) $(am__vpath_adj) \
-srcdir=$(srcdir); export srcdir; \
-rm -f address@hidden; \
-am__trap='rm -f '\''$(abs_builddir)/address@hidden'\''; (exit $$st); exit
$$st'; \
-trap "st=129; $$am__trap" 1; trap "st=130; $$am__trap" 2; \
-trap "st=141; $$am__trap" 13; trap "st=143; $$am__trap" 15; \
-am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
-test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
-if test -f "./$$f"; then dir=./; \
-elif test -f "$$f"; then dir=; \
-else dir="$(srcdir)/"; fi; \
-tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
-$(TESTS_ENVIRONMENT)
-# To be appended to the command running the test. Handle the stdout
-# and stderr redirection, and catch the exit status.
-am__check_post = \
->address@hidden 2>&1; \
-estatus=$$?; \
-if test -n '$(DISABLE_HARD_ERRORS)' \
- && test $$estatus -eq 99; then \
- estatus=1; \
-fi; \
-TERM=$$__SAVED_TERM; export TERM; \
-$(am__tty_colors); \
-xfailed=PASS; \
-case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
- xfailed=XFAIL;; \
-esac; \
-case $$estatus.$$xfailed in \
- 0.XFAIL) col=$$red; res=XPASS;; \
- 0.*) col=$$grn; res=PASS ;; \
- 77.*) col=$$blu; res=SKIP ;; \
- 99.*) col=$$red; res=FAIL ;; \
- *.XFAIL) col=$$lgn; res=XFAIL;; \
- *.*) col=$$red; res=FAIL ;; \
-esac; \
-echo "$${col}$$res$${std}: $$f"; \
-echo "$$res: $$f (exit: $$estatus)" | \
- $(am__rst_section) >$@; \
-cat address@hidden >>$@; \
-rm -f address@hidden
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check check-html recheck recheck-html
-TEST_SUITE_LOG = test-suite.log
-TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
-am__test_logs1 = $(TESTS:=.log)
-TEST_LOGS = $(am__test_logs1:.pl.log=.log)
-PL_LOG_COMPILE = $(PL_LOG_COMPILER) $(AM_PL_LOG_FLAGS) $(PL_LOG_FLAGS)
-TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-PL_LOG_COMPILER = $(PERL)
-AM_PL_LOG_FLAGS = -Mstrict -I ../.. -I $(top_srcdir)/lib -w
-TEST_EXTENSIONS = .pl
-TESTS = \
-Condition.pl \
-Condition-t.pl \
-DisjConditions.pl \
-DisjConditions-t.pl \
-Version.pl \
-Wrap.pl
-
-EXTRA_DIST = $(TESTS)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .html .log .pl
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu
lib/Automake/tests/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/Automake/tests/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
- @$(am__sh_e_setup); \
- list='$(TEST_LOGS)'; \
- results=`for f in $$list; do \
- test -r $$f && read line < $$f && echo "$$line" \
- || echo FAIL; \
- done`; \
- all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[
]*//'`; \
- fail=`echo "$$results" | grep -c '^FAIL'`; \
- pass=`echo "$$results" | grep -c '^PASS'`; \
- skip=`echo "$$results" | grep -c '^SKIP'`; \
- xfail=`echo "$$results" | grep -c '^XFAIL'`; \
- xpass=`echo "$$results" | grep -c '^XPASS'`; \
- failures=`expr $$fail + $$xpass`; \
- all=`expr $$all - $$skip`; \
- if test "$$all" -eq 1; then tests=test; All=; \
- else tests=tests; All="All "; fi; \
- case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
- fail=0:xpass=0:xfail=0) \
- msg="$$All$$all $$tests passed. "; \
- exit=true;; \
- fail=0:xpass=0:xfail=*) \
- msg="$$All$$all $$tests behaved as expected"; \
- if test "$$xfail" -eq 1; then xfailures=failure; \
- else xfailures=failures; fi; \
- msg="$$msg ($$xfail expected $$xfailures). "; \
- exit=true;; \
- fail=*:xpass=0:xfail=*) \
- msg="$$fail of $$all $$tests failed. "; \
- exit=false;; \
- fail=*:xpass=*:xfail=*) \
- msg="$$failures of $$all $$tests did not behave as expected"; \
- if test "$$xpass" -eq 1; then xpasses=pass; \
- else xpasses=passes; fi; \
- msg="$$msg ($$xpass unexpected $$xpasses). "; \
- exit=false;; \
- *) \
- echo >&2 "incorrect case"; exit 4;; \
- esac; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- msg="$$msg($$skip test was not run). "; \
- else \
- msg="$$msg($$skip tests were not run). "; \
- fi; \
- fi; \
- { \
- echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
- $(am__rst_title); \
- echo "$$msg"; \
- echo; \
- echo ".. contents:: :depth: 2"; \
- echo; \
- for f in $$list; do \
- test -r $$f && read line < $$f || line=; \
- case $$line in \
- PASS:*|XFAIL:*);; \
- *) echo; cat $$f;; \
- esac; \
- done; \
- } >$(TEST_SUITE_LOG).tmp; \
- mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
- if test "$$failures" -ne 0; then \
- msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
- if test -n "$(PACKAGE_BUGREPORT)"; then \
- msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
- fi; \
- fi; \
- test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
- $(am__tty_colors); \
- if $$exit; then \
- col="$$grn"; \
- else \
- col="$$red"; \
- fi; \
- echo "$$msg" | $(am__text_box) "col=$$col" "std=$$std"; \
- $$exit || exit 1
-
-# Run all the tests.
-check-TESTS:
- @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
- @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
- @list='$(TEST_LOGS)'; \
- list=`for f in $$list; do \
- test .log = $$f || echo $$f; \
- done | tr '\012\015' ' '`; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"
-
-.log.html:
- @list='$(RST2HTML) $$RST2HTML rst2html rst2html.py'; \
- for r2h in $$list; do \
- if ($$r2h --version) >/dev/null 2>&1; then \
- R2H=$$r2h; \
- fi; \
- done; \
- if test -z "$$R2H"; then \
- echo >&2 "cannot find rst2html, cannot create $@"; \
- exit 2; \
- fi; \
- $$R2H $< >address@hidden
- @mv address@hidden $@
-
-# Be sure to run check first, and then to convert the result.
-# Beware of concurrent executions. Run "check" not "check-TESTS", as
-# check-SCRIPTS and other dependencies are rebuilt by the former only.
-# And expect check to fail.
-check-html:
- @if $(MAKE) $(AM_MAKEFLAGS) check; then \
- rv=0; else rv=$$?; \
- fi; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4; \
- exit $$rv
-recheck recheck-html:
- @target=`echo $@ | sed 's,^re,,'`; \
- list='$(TEST_LOGS)'; \
- list=`for f in $$list; do \
- test -f $$f || continue; \
- if test -r $$f && read line < $$f; then \
- case $$line in FAIL*|XPASS*) echo $$f;; esac; \
- else echo $$f; fi; \
- done | tr '\012\015' ' '`; \
- list=`echo "$$list" | sed 's/ *$$//'`; \
- $(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS)
TEST_LOGS="'"$$list"'"'
-.pl.log:
- @p='$<'; $(am__check_pre) $(PL_LOG_COMPILE) "$$tst" $(am__check_post)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
- -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
- -test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
- -test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
- -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am check-html install-am install-strip recheck \
- recheck-html
-
-.PHONY: all all-am check check-TESTS check-am check-html clean \
- clean-generic distclean distclean-generic distdir dvi dvi-am \
- html html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am recheck recheck-html uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/Makefile.in b/lib/Makefile.in
deleted file mode 100644
index 1456f84..0000000
--- a/lib/Makefile.in
+++ /dev/null
@@ -1,647 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 2001, 2003, 2004, 2009 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = lib
-DIST_COMMON = $(dist_pkgvdata_DATA) $(dist_script_DATA) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in COPYING INSTALL \
- ansi2knr.1 ansi2knr.c compile config.guess config.sub depcomp \
- elisp-comp install-sh mdate-sh missing mkinstalldirs \
- py-compile texinfo.tex ylwrap
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(pkgvdatadir)" "$(DESTDIR)$(scriptdir)"
-DATA = $(dist_pkgvdata_DATA) $(dist_script_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = Automake am
-dist_pkgvdata_DATA = COPYING INSTALL texinfo.tex ansi2knr.c ansi2knr.1 \
- config-ml.in
-
-scriptdir = $(pkgvdatadir)
-dist_script_DATA = config.guess config.sub install-sh mdate-sh missing \
- mkinstalldirs elisp-comp ylwrap acinstall depcomp compile py-compile \
- symlink-tree
-
-EXTRA_DIST = gnupload
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_pkgvdataDATA: $(dist_pkgvdata_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkgvdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgvdatadir)"
- @list='$(dist_pkgvdata_DATA)'; test -n "$(pkgvdatadir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgvdatadir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgvdatadir)" || exit $$?; \
- done
-
-uninstall-dist_pkgvdataDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_pkgvdata_DATA)'; test -n "$(pkgvdatadir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(pkgvdatadir)'; $(am__uninstall_files_from_dir)
-install-dist_scriptDATA: $(dist_script_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)"
- @list='$(dist_script_DATA)'; test -n "$(scriptdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(scriptdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(scriptdir)" || exit $$?; \
- done
-
-uninstall-dist_scriptDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_script_DATA)'; test -n "$(scriptdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(scriptdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=:
am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(pkgvdatadir)" "$(DESTDIR)$(scriptdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_pkgvdataDATA install-dist_scriptDATA
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am: installcheck-local
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_pkgvdataDATA uninstall-dist_scriptDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-data-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic ctags \
- ctags-recursive distclean distclean-generic distclean-tags \
- distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am install-data-hook \
- install-dist_pkgvdataDATA install-dist_scriptDATA install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installcheck-local \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-dist_pkgvdataDATA uninstall-dist_scriptDATA
-
-
-install-data-hook:
- @$(POST_INSTALL)
- @for prog in $(dist_script_DATA); do \
- echo " chmod +x $(DESTDIR)$(scriptdir)/$$prog"; \
- chmod +x $(DESTDIR)$(scriptdir)/$$prog; \
- done
-
-installcheck-local:
- for file in $(dist_script_DATA); do \
- $(PERL) -e "exit ! -x '$(pkgvdatadir)/$$file';" || exit 1; \
- done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/am/Makefile.in b/lib/am/Makefile.in
deleted file mode 100644
index f570905..0000000
--- a/lib/am/Makefile.in
+++ /dev/null
@@ -1,445 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2003, 2004, 2008,
-# 2009 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = lib/am
-DIST_COMMON = $(dist_am_DATA) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(amdir)"
-DATA = $(dist_am_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-amdir = $(pkgvdatadir)/am
-dist_am_DATA = \
-ansi2knr.am \
-check.am \
-check2.am \
-clean-hdr.am \
-clean.am \
-compile.am \
-configure.am \
-data.am \
-dejagnu.am \
-depend.am \
-depend2.am \
-distdir.am \
-footer.am \
-header-vars.am \
-header.am \
-install.am \
-inst-vars.am \
-java.am \
-lang-compile.am \
-lex.am \
-library.am \
-libs.am \
-libtool.am \
-lisp.am \
-ltlib.am \
-ltlibrary.am \
-mans-vars.am \
-mans.am \
-multilib.am \
-program.am \
-progs.am \
-python.am \
-remake-hdr.am \
-scripts.am \
-subdirs.am \
-tags.am \
-texi-vers.am \
-texibuild.am \
-texinfos.am \
-vala.am \
-yacc.am
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/am/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/am/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_amDATA: $(dist_am_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(amdir)" || $(MKDIR_P) "$(DESTDIR)$(amdir)"
- @list='$(dist_am_DATA)'; test -n "$(amdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(amdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(amdir)" || exit $$?; \
- done
-
-uninstall-dist_amDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_am_DATA)'; test -n "$(amdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(amdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(amdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_amDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_amDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-dist_amDATA install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-dist_amDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/m4/Makefile.in b/m4/Makefile.in
deleted file mode 100644
index 2792188..0000000
--- a/m4/Makefile.in
+++ /dev/null
@@ -1,484 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2006,
-# 2008, 2009, 2011 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-subdir = m4
-DIST_COMMON = $(dist_automake_ac_DATA) $(dist_system_ac_DATA) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(automake_acdir)" \
- "$(DESTDIR)$(system_acdir)"
-DATA = $(dist_automake_ac_DATA) $(dist_system_ac_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-automake_acdir = $(datadir)/aclocal-$(APIVERSION)
-system_acdir = $(datadir)/aclocal
-dist_automake_ac_DATA = \
-$(top_srcdir)/m4/amversion.m4 \
-as.m4 \
-auxdir.m4 \
-ccstdc.m4 \
-cond.m4 \
-cond-if.m4 \
-depend.m4 \
-depout.m4 \
-dmalloc.m4 \
-gcj.m4 \
-header.m4 \
-init.m4 \
-install-sh.m4 \
-lead-dot.m4 \
-lex.m4 \
-lispdir.m4 \
-maintainer.m4 \
-make.m4 \
-minuso.m4 \
-missing.m4 \
-mkdirp.m4 \
-multi.m4 \
-obsol-gt.m4 \
-obsol-lt.m4 \
-obsolete.m4 \
-options.m4 \
-protos.m4 \
-python.m4 \
-regex.m4 \
-runlog.m4 \
-sanity.m4 \
-silent.m4 \
-strip.m4 \
-substnot.m4 \
-tar.m4 \
-upc.m4 \
-vala.m4
-
-
-# So that $(system_acdir) will be created by "make install".
-dist_system_ac_DATA =
-EXTRA_DIST = acdir/dirlist amversion.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu m4/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_automake_acDATA: $(dist_automake_ac_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(automake_acdir)" || $(MKDIR_P) "$(DESTDIR)$(automake_acdir)"
- @list='$(dist_automake_ac_DATA)'; test -n "$(automake_acdir)" || list=;
\
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(automake_acdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(automake_acdir)" || exit $$?; \
- done
-
-uninstall-dist_automake_acDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_automake_ac_DATA)'; test -n "$(automake_acdir)" || list=;
\
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(automake_acdir)'; $(am__uninstall_files_from_dir)
-install-dist_system_acDATA: $(dist_system_ac_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(system_acdir)" || $(MKDIR_P) "$(DESTDIR)$(system_acdir)"
- @list='$(dist_system_ac_DATA)'; test -n "$(system_acdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(system_acdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(system_acdir)" || exit $$?; \
- done
-
-uninstall-dist_system_acDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_system_ac_DATA)'; test -n "$(system_acdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(system_acdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(automake_acdir)" "$(DESTDIR)$(system_acdir)";
do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_automake_acDATA \
- install-dist_system_acDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_automake_acDATA \
- uninstall-dist_system_acDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-dist_automake_acDATA install-dist_system_acDATA \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-dist_automake_acDATA \
- uninstall-dist_system_acDATA
-
-
-# We build amversion.m4 here, instead of from config.status,
-# because config.status is rerun each time one of configure's
-# dependencies change and amversion.m4 happens to be a configure
-# dependency. configure and amversion.m4 would be rebuilt in
-# loop otherwise.
-# Use `$(top_srcdir)/m4' for the benefit of non-GNU makes: this is
-# how amversion.m4 appears in our dependencies.
-$(top_srcdir)/m4/amversion.m4: $(srcdir)/amversion.in
- sed -e 's,address@hidden@],$(VERSION),g' \
- -e 's,address@hidden@],$(APIVERSION),g' \
- -e "s,address@hidden@],Generated from amversion.in; do not edit by
hand.,g" \
- $(srcdir)/amversion.in > address@hidden
- chmod a-w address@hidden
- mv -f address@hidden $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/tests/Makefile.in b/tests/Makefile.in
deleted file mode 100644
index 261b462..0000000
--- a/tests/Makefile.in
+++ /dev/null
@@ -1,1566 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
address@hidden@
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/aclocal.in $(srcdir)/automake.in $(srcdir)/defs.in \
- $(srcdir)/parallel-tests.am
-subdir = tests
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
- $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
- $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
- $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
- $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
- $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
-CONFIG_CLEAN_FILES = defs aclocal-${APIVERSION} automake-${APIVERSION}
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-# If stdout is a non-dumb tty, use colors. If test -t is not supported,
-# then this fails; a conservative approach. Of course do not redirect
-# stdout here, just stderr.
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=; \
-test "X$(AM_COLOR_TESTS)" != Xno \
-&& test "X$$TERM" != Xdumb \
-&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
-&& { \
- red='[0;31m'; \
- grn='[0;32m'; \
- lgn='[1;32m'; \
- blu='[1;34m'; \
- std='[m'; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-# Restructured Text title and section.
-am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
-am__rst_section = sed 'p;s/./=/g;p;g'
-# Put stdin (possibly several lines separated by ". ") in a box.
-# Prefix each line by 'col' and terminate each with 'std', for coloring.
-# Multi line coloring is problematic with "less -R", so we really need
-# to color each line individually.
-am__text_box = $(AWK) '{ \
- n = split($$0, lines, "\\. "); max = 0; \
- for (i = 1; i <= n; ++i) \
- if (max < length(lines[i])) \
- max = length(lines[i]); \
- for (i = 0; i < max; ++i) \
- line = line "="; \
- print col line std; \
- for (i = 1; i <= n; ++i) \
- if (lines[i]) \
- print col lines[i] std; \
- print col line std; \
-}'
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# To be inserted before the command running the test. Creates the
-# directory for the log if needed. Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log, and passes
-# TESTS_ENVIRONMENT. Save and restore TERM around use of
-# TESTS_ENVIRONMENT, in case that unsets it.
-am__check_pre = \
-$(am__sh_e_setup); \
-$(am__vpath_adj_setup) $(am__vpath_adj) \
-srcdir=$(srcdir); export srcdir; \
-rm -f address@hidden; \
-am__trap='rm -f '\''$(abs_builddir)/address@hidden'\''; (exit $$st); exit
$$st'; \
-trap "st=129; $$am__trap" 1; trap "st=130; $$am__trap" 2; \
-trap "st=141; $$am__trap" 13; trap "st=143; $$am__trap" 15; \
-am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
-test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
-if test -f "./$$f"; then dir=./; \
-elif test -f "$$f"; then dir=; \
-else dir="$(srcdir)/"; fi; \
-tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
-$(TESTS_ENVIRONMENT)
-# To be appended to the command running the test. Handle the stdout
-# and stderr redirection, and catch the exit status.
-am__check_post = \
->address@hidden 2>&1; \
-estatus=$$?; \
-if test -n '$(DISABLE_HARD_ERRORS)' \
- && test $$estatus -eq 99; then \
- estatus=1; \
-fi; \
-TERM=$$__SAVED_TERM; export TERM; \
-$(am__tty_colors); \
-xfailed=PASS; \
-case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
- xfailed=XFAIL;; \
-esac; \
-case $$estatus.$$xfailed in \
- 0.XFAIL) col=$$red; res=XPASS;; \
- 0.*) col=$$grn; res=PASS ;; \
- 77.*) col=$$blu; res=SKIP ;; \
- 99.*) col=$$red; res=FAIL ;; \
- *.XFAIL) col=$$lgn; res=XFAIL;; \
- *.*) col=$$red; res=FAIL ;; \
-esac; \
-echo "$${col}$$res$${std}: $$f"; \
-echo "$$res: $$f (exit: $$estatus)" | \
- $(am__rst_section) >$@; \
-cat address@hidden >>$@; \
-rm -f address@hidden
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check check-html recheck recheck-html
-TEST_SUITE_LOG = test-suite.log
-TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
-TEST_EXTENSIONS = .test
-am__test_logs1 = $(TESTS:=.log)
-TEST_LOGS = $(am__test_logs1:.test.log=.log)
-TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
- $(TEST_LOG_FLAGS)
-TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-APIVERSION = @APIVERSION@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-FGREP = @FGREP@
-GREP = @GREP@
-HELP2MAN = @HELP2MAN@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LN = @LN@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MODIFICATION_DELAY = @MODIFICATION_DELAY@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PERL_THREADS = @PERL_THREADS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEX = @TEX@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-am_AUTOCONF = @am_AUTOCONF@
-am_AUTOHEADER = @am_AUTOHEADER@
-am_AUTOM4TE = @am_AUTOM4TE@
-am_AUTORECONF = @am_AUTORECONF@
-am_AUTOUPDATE = @am_AUTOUPDATE@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgvdatadir = @pkgvdatadir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sh_errexit_works = @sh_errexit_works@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-XFAIL_TESTS = \
-all.test \
-auxdir2.test \
-cond17.test \
-dist-auxfile.test \
-dist-auxfile-2.test \
-gcj6.test \
-java-nobase.test \
-pr8365-remake-timing.test \
-lex-subobj-nodep.test \
-remake-am-pr10111.test \
-remake-m4-pr10111.test \
-vala-vpath.test \
-txinfo5.test
-
-parallel_tests = \
-check-concurrency-bug9245-p.test \
-check-exported-srcdir-p.test \
-check-tests-in-builddir-p.test \
-check-tests_environment-p.test \
-check-p.test \
-check10-p.test \
-check11-p.test \
-check2-p.test \
-check3-p.test \
-check4-p.test \
-check5-p.test \
-check6-p.test \
-check7-p.test \
-check8-p.test \
-check9-p.test \
-color-p.test \
-color2-p.test \
-comment9-p.test \
-dejagnu-p.test \
-exeext4-p.test \
-maken3-p.test \
-maken4-p.test
-
-MAINTAINERCLEANFILES = $(parallel_tests)
-
-# Some testsuite-influential variables should be overridable from the
-# test scripts, but not from the environment.
-TESTS_ENVIRONMENT = \
- test x"$$me" = x || unset me; \
- test x"$$required" = x || unset required; \
- test x"$$parallel_tests" = x || unset parallel_tests;
-
-TESTS = \
-self-check-env-sanitize.test \
-self-check-report.test \
-aclibobj.test \
-aclocal.test \
-aclocal3.test \
-aclocal4.test \
-aclocal5.test \
-aclocal6.test \
-aclocal7.test \
-aclocal8.test \
-aclocal9.test \
-acloca10.test \
-acloca11.test \
-acloca12.test \
-acloca13.test \
-acloca14.test \
-acloca15.test \
-acloca16.test \
-acloca17.test \
-acloca18.test \
-acloca19.test \
-acloca20.test \
-acloca21.test \
-acloca22.test \
-aclocal-acdir.test \
-aclocal-print-acdir.test \
-aclocal-path.test \
-aclocal-path-install.test \
-aclocal-path-install-serial.test \
-aclocal-path-nonexistent.test \
-aclocal-path-precedence.test \
-acoutnoq.test \
-acoutpt.test \
-acoutpt2.test \
-acoutqnl.test \
-acoutbs.test \
-acoutbs2.test \
-acsilent.test \
-acsubst.test \
-acsubst2.test \
-all.test \
-all2.test \
-alloca.test \
-alloca2.test \
-alpha.test \
-alpha2.test \
-amhello-cflags.test \
-amhello-cross-compile.test \
-amhello-binpkg.test \
-amassign.test \
-ammissing.test \
-amopt.test \
-amsubst.test \
-ansi2knr-deprecation.test \
-ansi.test \
-ansi2.test \
-ansi3.test \
-ansi3b.test \
-ansi4.test \
-ansi5.test \
-ansi6.test \
-ansi7.test \
-ansi8.test \
-ansi9.test \
-ansi10.test \
-ar.test \
-ar2.test \
-asm.test \
-asm2.test \
-asm3.test \
-autodist.test \
-autodist-subdir.test \
-autodist-acconfig.test \
-autodist-acconfig-no-subdir.test \
-autodist-aclocal-m4.test \
-autodist-config-headers.test \
-autodist-configure-no-subdir.test \
-autodist-no-duplicate.test \
-autodist-stamp-vti.test \
-autohdr.test \
-autohdr2.test \
-autohdr3.test \
-autohdr4.test \
-autohdrdry.test \
-automake.test \
-auxdir.test \
-auxdir2.test \
-auxdir3.test \
-auxdir4.test \
-backsl.test \
-backsl2.test \
-backsl3.test \
-backsl4.test \
-badline.test \
-badopt.test \
-badprog.test \
-block.test \
-bsource.test \
-canon.test \
-canon2.test \
-canon3.test \
-canon4.test \
-canon5.test \
-canon-name.test \
-ccnoco.test \
-ccnoco2.test \
-ccnoco3.test \
-check.test \
-check2.test \
-check3.test \
-check4.test \
-check5.test \
-check6.test \
-check7.test \
-check8.test \
-check9.test \
-check10.test \
-check11.test \
-check-exported-srcdir.test \
-check-tests-in-builddir.test \
-check-tests_environment.test \
-check-concurrency-bug9245.test \
-tests-environment-backcompat.test \
-checkall.test \
-clean.test \
-clean2.test \
-colneq.test \
-colneq2.test \
-colon.test \
-colon2.test \
-colon3.test \
-colon4.test \
-colon5.test \
-colon6.test \
-colon7.test \
-color.test \
-color2.test \
-comment.test \
-comment2.test \
-comment3.test \
-comment4.test \
-comment5.test \
-comment6.test \
-comment7.test \
-comment8.test \
-comment9.test \
-commen10.test \
-commen11.test \
-comments-in-var-def.test \
-compile.test \
-compile2.test \
-compile_f90_c_cxx.test \
-compile_f_c_cxx.test \
-cond.test \
-cond2.test \
-cond3.test \
-cond4.test \
-cond5.test \
-cond6.test \
-cond7.test \
-cond8.test \
-cond9.test \
-cond10.test \
-cond11.test \
-cond13.test \
-cond14.test \
-cond15.test \
-cond16.test \
-cond17.test \
-cond18.test \
-cond19.test \
-cond20.test \
-cond21.test \
-cond22.test \
-cond23.test \
-cond24.test \
-cond25.test \
-cond26.test \
-cond27.test \
-cond28.test \
-cond29.test \
-cond30.test \
-cond31.test \
-cond32.test \
-cond33.test \
-cond34.test \
-cond35.test \
-cond36.test \
-cond37.test \
-cond38.test \
-cond39.test \
-cond40.test \
-cond41.test \
-cond42.test \
-cond43.test \
-cond44.test \
-cond45.test \
-condd.test \
-condhook.test \
-condhook2.test \
-condinc.test \
-condinc2.test \
-condlib.test \
-condman.test \
-condman2.test \
-condman3.test \
-configure.test \
-confdeps.test \
-conff.test \
-conff2.test \
-confh.test \
-confh4.test \
-confh5.test \
-confh6.test \
-confh7.test \
-confh8.test \
-confincl.test \
-conflnk.test \
-conflnk2.test \
-conflnk3.test \
-conflnk4.test \
-confsub.test \
-confvar.test \
-confvar2.test \
-copy.test \
-ctarget1.test \
-cxx.test \
-cxx2.test \
-cxxansi.test \
-cxxcpp.test \
-cxxlibobj.test \
-cxxlink.test \
-cxxnoc.test \
-cxxo.test \
-cygwin32.test \
-dash.test \
-defun.test \
-defun2.test \
-dejagnu.test \
-dejagnu2.test \
-dejagnu3.test \
-dejagnu4.test \
-dejagnu5.test \
-dejagnu6.test \
-dejagnu7.test \
-dejagnu-absolute-builddir.test \
-dejagnu-relative-srcdir.test \
-dejagnu-siteexp-extend.test \
-dejagnu-siteexp-append.test \
-dejagnu-siteexp-useredit.test \
-deleted-am.test \
-deleted-m4.test \
-depacl2.test \
-depcomp.test \
-depcomp2.test \
-depcomp3.test \
-depcomp4.test \
-depcomp5.test \
-depcomp6.test \
-depcomp7.test \
-depcomp8a.test \
-depcomp8b.test \
-depcomp9.test \
-depcomp10.test \
-depdist.test \
-depend.test \
-depend2.test \
-depend3.test \
-depend4.test \
-depend5.test \
-depend6.test \
-destdir.test \
-dirlist.test \
-dirlist2.test \
-discover.test \
-dist-auxfile.test \
-dist-auxfile-2.test \
-dist-included-parent-dir.test \
-distcleancheck.test \
-distcom2.test \
-distcom3.test \
-distcom4.test \
-distcom5.test \
-distcom6.test \
-distcom7.test \
-distdir.test \
-distlinks.test \
-distlinksbrk.test \
-distname.test \
-distcheck-configure-flags.test \
-distcheck-configure-flags-am.test \
-distcheck-configure-flags-subpkg.test \
-distcheck-hook.test \
-distcheck-hook2.test \
-distcheck-missing-m4.test \
-distcheck-outdated-m4.test \
-distcheck-pr9579.test \
-distcheck-override-infodir.test \
-dmalloc.test \
-doc-parsing-buglets-colneq-subst.test \
-doc-parsing-buglets-tabs.test \
-dollar.test \
-dollarvar.test \
-dollarvar2.test \
-double.test \
-dup2.test \
-else.test \
-empty.test \
-empty2.test \
-empty3.test \
-empty4.test \
-exdir.test \
-exdir2.test \
-exdir3.test \
-exeext.test \
-exeext2.test \
-exeext3.test \
-exeext4.test \
-exsource.test \
-ext.test \
-ext2.test \
-extra.test \
-extra2.test \
-extra3.test \
-extra4.test \
-extra5.test \
-extra6.test \
-extra7.test \
-extra8.test \
-extra10.test \
-extra11.test \
-extra12.test \
-f90only.test \
-flavor.test \
-flibs.test \
-fn99.test \
-fn99subdir.test \
-fnoc.test \
-fo.test \
-forcemiss.test \
-forcemiss2.test \
-fort1.test \
-fort2.test \
-fort4.test \
-fort5.test \
-fonly.test \
-fortdep.test \
-gcj.test \
-gcj2.test \
-gcj3.test \
-gcj4.test \
-gcj5.test \
-gcj6.test \
-getopt.test \
-gettext.test \
-gettext2.test \
-gettext3.test \
-gnumake.test \
-gnuwarn.test \
-gnuwarn2.test \
-gnits.test \
-gnits2.test \
-gnits3.test \
-hdr-vars-defined-once.test \
-header.test \
-help.test \
-help2.test \
-help3.test \
-help4.test \
-help-depend.test \
-help-depend2.test \
-help-dmalloc.test \
-help-init.test \
-help-lispdir.test \
-help-multilib.test \
-help-python.test \
-help-regex.test \
-help-silent.test \
-help-upc.test \
-hfs.test \
-hosts.test \
-implicit.test \
-info.test \
-init.test \
-init2.test \
-insh2.test \
-install2.test \
-installdir.test \
-install-info-dir.test \
-instsh.test \
-instsh2.test \
-instsh3.test \
-instdat.test \
-instdat2.test \
-instdir.test \
-instdir2.test \
-instdir-java.test \
-instdir-lisp.test \
-instdir-ltlib.test \
-instdir-prog.test \
-instdir-python.test \
-instdir-texi.test \
-instexec.test \
-instfail.test \
-instfail-info.test \
-instfail-java.test \
-instfail-libtool.test \
-insthook.test \
-instman.test \
-instman2.test \
-instmany.test \
-instmany-mans.test \
-instmany-python.test \
-instspc.test \
-interp.test \
-interp2.test \
-java.test \
-java2.test \
-java3.test \
-java-check.test \
-java-empty-classpath.test \
-javadir-undefined.test \
-javaprim.test \
-javasubst.test \
-java-clean.test \
-java-nobase.test \
-java-compile-install.test \
-java-sources.test \
-java-no-duplicate.test \
-java-mix.test \
-ldadd.test \
-ldflags.test \
-lex.test \
-lex2.test \
-lex3.test \
-lex4.test \
-lex5.test \
-lex-subobj-nodep.test \
-lflags.test \
-lflags2.test \
-libexec.test \
-libobj2.test \
-libobj3.test \
-libobj4.test \
-libobj5.test \
-libobj7.test \
-libobj8.test \
-libobj10.test \
-libobj11.test \
-libobj12.test \
-libobj13.test \
-libobj14.test \
-library.test \
-library2.test \
-library3.test \
-libtool.test \
-libtool2.test \
-libtool3.test \
-libtool4.test \
-libtool5.test \
-libtool6.test \
-libtool7.test \
-libtool8.test \
-libtool9.test \
-libtoo10.test \
-libtoo11.test \
-license.test \
-license2.test \
-link_c_cxx.test \
-link_dist.test \
-link_f90_only.test \
-link_fc.test \
-link_fccxx.test \
-link_fcxx.test \
-link_f_only.test \
-lisp2.test \
-lisp3.test \
-lisp4.test \
-lisp5.test \
-lisp6.test \
-lisp7.test \
-lisp8.test \
-lispdry.test \
-listval.test \
-location.test \
-longline.test \
-longlin2.test \
-ltcond.test \
-ltcond2.test \
-ltconv.test \
-ltdeps.test \
-ltinit.test \
-ltinstloc.test \
-ltlibobjs.test \
-ltlibsrc.test \
-ltorder.test \
-lzma.test \
-m4-inclusion.test \
-maintclean.test \
-maintclean-vpath.test \
-maintmode-configure-msg.test \
-make.test \
-makej.test \
-makej2.test \
-maken.test \
-maken2.test \
-maken3.test \
-maken4.test \
-makevars.test \
-man.test \
-man2.test \
-man3.test \
-man4.test \
-man5.test \
-mdate.test \
-mdate2.test \
-mdate3.test \
-mdate4.test \
-mdate5.test \
-mdate6.test \
-missing.test \
-missing2.test \
-missing3.test \
-missing4.test \
-missing5.test \
-missing6.test \
-missing-tar.test \
-mkinstall.test \
-mkinst2.test \
-mkinst3.test \
-mmode.test \
-mmodely.test \
-multlib.test \
-nobase.test \
-nobase-libtool.test \
-nobase-python.test \
-nobase-nodist.test \
-nodef.test \
-nodef2.test \
-nodep.test \
-nodep2.test \
-nodepcomp.test \
-nodist.test \
-nodist2.test \
-nodist3.test \
-nogzip.test \
-nogzip2.test \
-noinst.test \
-noinstdir.test \
-nolink.test \
-nostdinc.test \
-notrans.test \
-number.test \
-objc.test \
-objc2.test \
-obsolete.test \
-order.test \
-outdir.test \
-output.test \
-output2.test \
-output3.test \
-output4.test \
-output5.test \
-output6.test \
-output7.test \
-output8.test \
-output9.test \
-output10.test \
-output11.test \
-output12.test \
-output13.test \
-output-order.test \
-overrid.test \
-parallel-am.test \
-parallel-am2.test \
-parallel-am3.test \
-parallel-tests.test \
-parallel-tests2.test \
-parallel-tests3.test \
-parallel-tests4.test \
-parallel-tests5.test \
-parallel-tests6.test \
-parallel-tests7.test \
-parallel-tests8.test \
-parallel-tests9.test \
-parallel-tests10.test \
-parallel-tests-harderror.test \
-parallel-tests-unreadable-log.test \
-parallel-tests-subdir.test \
-parallel-tests-log-override-1.test \
-parallel-tests-log-override-2.test \
-parallel-tests-log-override-recheck.test \
-parallel-tests-log-compiler-example.test \
-test-extensions.test \
-test-extensions-cond.test \
-parse.test \
-percent.test \
-percent2.test \
-phony.test \
-pluseq.test \
-pluseq2.test \
-pluseq3.test \
-pluseq4.test \
-pluseq5.test \
-pluseq6.test \
-pluseq7.test \
-pluseq8.test \
-pluseq9.test \
-pluseq10.test \
-pluseq11.test \
-postproc.test \
-ppf77.test \
-pr2.test \
-pr9.test \
-pr72.test \
-pr87.test \
-pr204.test \
-pr211.test \
-pr220.test \
-pr224.test \
-pr229.test \
-pr243.test \
-pr266.test \
-pr279.test \
-pr279-2.test \
-pr287.test \
-pr300-lib.test \
-pr300-ltlib.test \
-pr300-prog.test \
-pr307.test \
-pr401.test \
-pr401b.test \
-pr401c.test \
-prefix.test \
-primary.test \
-primary2.test \
-primary3.test \
-primary-prefix-invalid-couples.test \
-primary-prefix-valid-couples.test \
-primary-prefix-couples-force-valid.test \
-primary-prefix-couples-documented-valid.test \
-proginst.test \
-py-compile-basic.test \
-py-compile-basic2.test \
-py-compile-basedir.test \
-py-compile-destdir.test \
-py-compile-env.test \
-py-compile-option-terminate.test \
-py-compile-usage.test \
-python.test \
-python2.test \
-python3.test \
-python4.test \
-python5.test \
-python6.test \
-python7.test \
-python8.test \
-python9.test \
-python10.test \
-python11.test \
-python12.test \
-recurs.test \
-recurs2.test \
-remake.test \
-remake2.test \
-remake3.test \
-remake4.test \
-remake5.test \
-remake6.test \
-remake7.test \
-remake-subdir-from-subdir.test \
-remake-subdir-gnu.test \
-remake-subdir.test \
-remake-subdir2.test \
-remake-subdir-long-time.test \
-remake-am-pr10111.test \
-remake-m4-pr10111.test \
-pr8365-remake-timing.test \
-regex.test \
-req.test \
-reqd.test \
-reqd2.test \
-rulepat.test \
-sanity.test \
-scripts.test \
-seenc.test \
-silent.test \
-silent2.test \
-silent3.test \
-silent4.test \
-silent6.test \
-silent7.test \
-silent9.test \
-silentcxx.test \
-silentf77.test \
-silentf90.test \
-silent-many-gcc.test \
-silent-many-generic.test \
-silent-lex-gcc.test \
-silent-lex-generic.test \
-silent-yacc-gcc.test \
-silent-yacc-generic.test \
-silent-configsite.test \
-srcsub.test \
-srcsub2.test \
-space.test \
-specflg.test \
-specflg2.test \
-specflg3.test \
-specflg6.test \
-specflg7.test \
-specflg8.test \
-specflg9.test \
-specflg10.test \
-specflg-dummy.test \
-spell.test \
-spell2.test \
-spell3.test \
-spelling.test \
-spy.test \
-stdinc.test \
-stamph2.test \
-stdlib.test \
-stdlib2.test \
-strip.test \
-strip2.test \
-strip3.test \
-subdir.test \
-subdir2.test \
-subdir3.test \
-subdir4.test \
-subdir5.test \
-subdir6.test \
-subdir7.test \
-subdir8.test \
-subdir9.test \
-subdir10.test \
-subdirbuiltsources.test \
-subcond.test \
-subcond2.test \
-subcond3.test \
-subobj.test \
-subobj2.test \
-subobj3.test \
-subobj4.test \
-subobj5.test \
-subobj6.test \
-subobj7.test \
-subobj8.test \
-subobj9.test \
-subobj10.test \
-subobj11a.test \
-subobj11b.test \
-subobj11c.test \
-subobjname.test \
-subpkg.test \
-subpkg2.test \
-subpkg3.test \
-subpkg4.test \
-subpkg-yacc.test \
-subst.test \
-subst2.test \
-subst3.test \
-subst4.test \
-substref.test \
-substre2.test \
-substtarg.test \
-suffix.test \
-suffix2.test \
-suffix3.test \
-suffix4.test \
-suffix5.test \
-suffix6.test \
-suffix7.test \
-suffix8.test \
-suffix9.test \
-suffix10.test \
-suffix11.test \
-suffix12.test \
-suffix13.test \
-symlink.test \
-symlink2.test \
-syntax.test \
-tags.test \
-tagsub.test \
-tar.test \
-tar2.test \
-tar3.test \
-target-cflags.test \
-targetclash.test \
-txinfo.test \
-txinfo2.test \
-txinfo3.test \
-txinfo4.test \
-txinfo5.test \
-txinfo5b.test \
-txinfo6.test \
-txinfo7.test \
-txinfo8.test \
-txinfo9.test \
-txinfo10.test \
-txinfo13.test \
-txinfo16.test \
-txinfo17.test \
-txinfo18.test \
-txinfo19.test \
-txinfo20.test \
-txinfo21.test \
-txinfo22.test \
-txinfo23.test \
-txinfo24.test \
-txinfo25.test \
-txinfo26.test \
-txinfo27.test \
-txinfo28.test \
-txinfo29.test \
-txinfo30.test \
-txinfo31.test \
-txinfo32.test \
-txinfo33.test \
-transform.test \
-transform2.test \
-uninstall-pr9578.test \
-uninstall-fail.test \
-unused.test \
-upc.test \
-upc2.test \
-upc3.test \
-vala.test \
-vala1.test \
-vala2.test \
-vala3.test \
-vala4.test \
-vala5.test \
-vala-vpath.test \
-vars.test \
-vars3.test \
-vartar.test \
-version.test \
-version2.test \
-version3.test \
-version4.test \
-version6.test \
-version7.test \
-version8.test \
-vpath.test \
-vtexi.test \
-vtexi2.test \
-vtexi3.test \
-vtexi4.test \
-warnopts.test \
-werror.test \
-werror2.test \
-werror3.test \
-whoami.test \
-xsource.test \
-xz.test \
-yacc.test \
-yacc2.test \
-yacc3.test \
-yacc4.test \
-yacc5.test \
-yacc6.test \
-yacc7.test \
-yacc8.test \
-yaccdry.test \
-yaccpp.test \
-yaccvpath.test \
-yacc-dist-nobuild-subdir.test \
-yflags.test \
-yflags2.test \
-$(parallel_tests)
-
-EXTRA_DIST = ChangeLog-old gen-parallel-tests $(TESTS) \
- distcheck-hook-m4.am
-
-# Each test case depends on defs, aclocal, and automake.
-check_SCRIPTS = defs aclocal-$(APIVERSION) automake-$(APIVERSION)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .html .log .test
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/parallel-tests.am
$(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu tests/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-defs: $(top_builddir)/config.status $(srcdir)/defs.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-aclocal-${APIVERSION}: $(top_builddir)/config.status $(srcdir)/aclocal.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-automake-${APIVERSION}: $(top_builddir)/config.status $(srcdir)/automake.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-$(TEST_SUITE_LOG): $(TEST_LOGS)
- @$(am__sh_e_setup); \
- list='$(TEST_LOGS)'; \
- results=`for f in $$list; do \
- test -r $$f && read line < $$f && echo "$$line" \
- || echo FAIL; \
- done`; \
- all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[
]*//'`; \
- fail=`echo "$$results" | grep -c '^FAIL'`; \
- pass=`echo "$$results" | grep -c '^PASS'`; \
- skip=`echo "$$results" | grep -c '^SKIP'`; \
- xfail=`echo "$$results" | grep -c '^XFAIL'`; \
- xpass=`echo "$$results" | grep -c '^XPASS'`; \
- failures=`expr $$fail + $$xpass`; \
- all=`expr $$all - $$skip`; \
- if test "$$all" -eq 1; then tests=test; All=; \
- else tests=tests; All="All "; fi; \
- case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
- fail=0:xpass=0:xfail=0) \
- msg="$$All$$all $$tests passed. "; \
- exit=true;; \
- fail=0:xpass=0:xfail=*) \
- msg="$$All$$all $$tests behaved as expected"; \
- if test "$$xfail" -eq 1; then xfailures=failure; \
- else xfailures=failures; fi; \
- msg="$$msg ($$xfail expected $$xfailures). "; \
- exit=true;; \
- fail=*:xpass=0:xfail=*) \
- msg="$$fail of $$all $$tests failed. "; \
- exit=false;; \
- fail=*:xpass=*:xfail=*) \
- msg="$$failures of $$all $$tests did not behave as expected"; \
- if test "$$xpass" -eq 1; then xpasses=pass; \
- else xpasses=passes; fi; \
- msg="$$msg ($$xpass unexpected $$xpasses). "; \
- exit=false;; \
- *) \
- echo >&2 "incorrect case"; exit 4;; \
- esac; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- msg="$$msg($$skip test was not run). "; \
- else \
- msg="$$msg($$skip tests were not run). "; \
- fi; \
- fi; \
- { \
- echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
- $(am__rst_title); \
- echo "$$msg"; \
- echo; \
- echo ".. contents:: :depth: 2"; \
- echo; \
- for f in $$list; do \
- test -r $$f && read line < $$f || line=; \
- case $$line in \
- PASS:*|XFAIL:*);; \
- *) echo; cat $$f;; \
- esac; \
- done; \
- } >$(TEST_SUITE_LOG).tmp; \
- mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
- if test "$$failures" -ne 0; then \
- msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
- if test -n "$(PACKAGE_BUGREPORT)"; then \
- msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
- fi; \
- fi; \
- test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
- $(am__tty_colors); \
- if $$exit; then \
- col="$$grn"; \
- else \
- col="$$red"; \
- fi; \
- echo "$$msg" | $(am__text_box) "col=$$col" "std=$$std"; \
- $$exit || exit 1
-
-# Run all the tests.
-check-TESTS:
- @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
- @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
- @list='$(TEST_LOGS)'; \
- list=`for f in $$list; do \
- test .log = $$f || echo $$f; \
- done | tr '\012\015' ' '`; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"
-
-.log.html:
- @list='$(RST2HTML) $$RST2HTML rst2html rst2html.py'; \
- for r2h in $$list; do \
- if ($$r2h --version) >/dev/null 2>&1; then \
- R2H=$$r2h; \
- fi; \
- done; \
- if test -z "$$R2H"; then \
- echo >&2 "cannot find rst2html, cannot create $@"; \
- exit 2; \
- fi; \
- $$R2H $< >address@hidden
- @mv address@hidden $@
-
-# Be sure to run check first, and then to convert the result.
-# Beware of concurrent executions. Run "check" not "check-TESTS", as
-# check-SCRIPTS and other dependencies are rebuilt by the former only.
-# And expect check to fail.
-check-html:
- @if $(MAKE) $(AM_MAKEFLAGS) check; then \
- rv=0; else rv=$$?; \
- fi; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4; \
- exit $$rv
-recheck recheck-html:
- @target=`echo $@ | sed 's,^re,,'`; \
- list='$(TEST_LOGS)'; \
- list=`for f in $$list; do \
- test -f $$f || continue; \
- if test -r $$f && read line < $$f; then \
- case $$line in FAIL*|XPASS*) echo $$f;; esac; \
- else echo $$f; fi; \
- done | tr '\012\015' ' '`; \
- list=`echo "$$list" | sed 's/ *$$//'`; \
- $(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS)
TEST_LOGS="'"$$list"'"'
-.test.log:
- @p='$<'; $(am__check_pre) $(TEST_LOG_COMPILE) "$$tst" $(am__check_post)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx
{} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
- -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
- -test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
- -test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
- -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f
$(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am check-html install-am install-strip recheck \
- recheck-html
-
-.PHONY: all all-am check check-TESTS check-am check-html clean \
- clean-generic clean-local distclean distclean-generic distdir \
- dvi dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am recheck recheck-html uninstall uninstall-am
-
-
-$(srcdir)/parallel-tests.am: gen-parallel-tests Makefile.am
- (cd $(srcdir) && $(SHELL) ./gen-parallel-tests) >$@
-
-$(parallel_tests): $(parallel_tests:-p.test=.test) Makefile.am
- input=`echo $@ | sed 's,.*/,,; s,-p.test$$,.test,'`; \
- sed 's|^\. \./defs.*|parallel_tests=yes; &|' \
- < $(srcdir)/$$input >$@
- chmod a+rx $@
-
-distcheck-missing-m4.log distcheck-outdated-m4.log: distcheck-hook-m4.am
-
-clean-local: clean-local-check
-.PHONY: clean-local-check
-clean-local-check:
- -set x *.dir; shift; \
- if test "$$#,$$1" = "1,*.dir"; then \
- : there is no test directory to clean; \
- else \
- find "$$@" -type d ! -perm -700 -exec chmod u+rwx {} ';'; \
- rm -rf "$$@"; \
- fi;
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.11-573-gf60ca93,
Stefano Lattarini <=