[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[AUCTeX-diffs] GNU AUCTeX branch, master, updated. 22c7d9fb60ddc71102d41
|
From: |
Tassilo Horn |
|
Subject: |
[AUCTeX-diffs] GNU AUCTeX branch, master, updated. 22c7d9fb60ddc71102d41ea45dcad5493202ff70 |
|
Date: |
Fri, 04 Sep 2015 07:39:53 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU AUCTeX".
The branch, master has been updated
via 22c7d9fb60ddc71102d41ea45dcad5493202ff70 (commit)
from c3cb0ff1f6dc2f699b119b8bdc08ec782399b919 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 22c7d9fb60ddc71102d41ea45dcad5493202ff70
Author: Tassilo Horn <address@hidden>
Date: Fri Sep 4 09:29:01 2015 +0200
Implement "run-all" for regions and sections
* tex.el: Add autoloads for the new commands.
* tex-buf.el (TeX-region-update): New function.
(TeX-command-region): Use it.
(LaTeX-command-section-boundaries): New function.
(LaTeX-command-section): Use it.
(TeX-command-run-all-region): New command.
(LaTeX-command-run-all-section): New command.
(TeX-command-run-all): Move it here from tex.el.
diff --git a/ChangeLog b/ChangeLog
index 5777c56..0295e3b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,15 @@
2015-09-04 Tassilo Horn <address@hidden>
+ * tex.el: Add autoloads for the new commands.
+
+ * tex-buf.el (TeX-region-update): New function.
+ (TeX-command-region): Use it.
+ (LaTeX-command-section-boundaries): New function.
+ (LaTeX-command-section): Use it.
+ (TeX-command-run-all-region): New command.
+ (LaTeX-command-run-all-section): New command.
+ (TeX-command-run-all): Move it here from tex.el.
+
* tex.el (TeX-command-run-all): Rename from TeX-update.
(TeX-mode-map): Bind TeX-command-run-all to C-c C-a.
diff --git a/tex-buf.el b/tex-buf.el
index c670fd7..4329cdc 100644
--- a/tex-buf.el
+++ b/tex-buf.el
@@ -142,6 +142,21 @@ pinned region will get unpinned and vice versa."
(setq TeX-command-region-end nil)
(message "TeX region unpinned.")))
+(defun TeX-region-update ()
+ "Update the TeX-region file."
+ ;; Note that TeX-command-region-begin is not a marker when called
+ ;; from TeX-command-buffer.
+ (and (or (null TeX-command-region-begin)
+ (markerp TeX-command-region-begin))
+ (TeX-active-mark)
+ (TeX-pin-region (region-beginning) (region-end)))
+ (let ((begin (or TeX-command-region-begin (region-beginning)))
+ (end (or TeX-command-region-end (region-end))))
+ (TeX-region-create (TeX-region-file TeX-default-extension)
+ (buffer-substring begin end)
+ (file-name-nondirectory (buffer-file-name))
+ (TeX-current-offset begin))))
+
(defun TeX-command-region (&optional override-confirm)
"Run TeX on the current region.
@@ -163,18 +178,7 @@ If the master file for the document has a trailer, it is
written to
the temporary file before the region itself. The document's trailer is
all text after `TeX-trailer-start'."
(interactive "P")
- ;; Note that TeX-command-region-begin is not a marker when called
- ;; from TeX-command-buffer.
- (and (or (null TeX-command-region-begin)
- (markerp TeX-command-region-begin))
- (TeX-active-mark)
- (TeX-pin-region (region-beginning) (region-end)))
- (let ((begin (or TeX-command-region-begin (region-beginning)))
- (end (or TeX-command-region-end (region-end))))
- (TeX-region-create (TeX-region-file TeX-default-extension)
- (buffer-substring begin end)
- (file-name-nondirectory (buffer-file-name))
- (TeX-current-offset begin)))
+ (TeX-region-update)
(TeX-command (TeX-command-query (TeX-region-file nil t)) 'TeX-region-file
override-confirm))
@@ -511,7 +515,7 @@ without further expansion."
;; Advance past the file name in order to
;; prevent expanding any substring of it.
(setq pos (+ pos (length expansion-res))))
- expansion-res)
+ expansion-res)
(t
(error "Nonexpansion %s" expansion)))))
(if (stringp string)
@@ -634,7 +638,7 @@ omitted) and `TeX-region-file'."
(setq cmd (funcall command)
TeX-command-sequence-command command))
(t
- (setq cmd (TeX-command-default (funcall file-fn))
+ (setq cmd (TeX-command-default (funcall file-fn nil t))
TeX-command-sequence-command t)))
(TeX-command cmd file-fn 0)
(when reset
@@ -1864,6 +1868,27 @@ levels are defined by `LaTeX-section-list'."
old-level (car (rassoc (list LaTeX-command-section-level)
LaTeX-section-list)))))))
+(defun LaTeX-command-section-boundaries ()
+ "Return the boundaries of the current section as (start . end).
+The section is determined by `LaTeX-command-section-level'."
+ (let* ((case-fold-search nil)
+ (rx (concat "\\\\" (regexp-opt
+ (mapcar
+ (lambda (level)
+ (car (rassoc (list level) LaTeX-section-list)))
+ (let (r)
+ (dotimes (i (1+ (LaTeX-command-section-level)))
+ (push i r))
+ r)))
+ "{")))
+ (cons (save-excursion
+ (re-search-backward rx nil t)
+ (point))
+ (save-excursion
+ (re-search-forward rx nil t)
+ (forward-line 0)
+ (point)))))
+
(defun LaTeX-command-section (&optional override-confirm)
"Run a command on the current section.
@@ -1879,25 +1904,39 @@ If a prefix argument OVERRIDE-CONFIRM is given,
confirmation will
depend on it being positive instead of the entry in
`TeX-command-list'."
(interactive "P")
- (let* ((case-fold-search t)
- (rx (concat "\\\\" (regexp-opt
- (mapcar
- (lambda (level)
- (car (rassoc (list level) LaTeX-section-list)))
- (let (r)
- (dotimes (i (1+ (LaTeX-command-section-level)))
- (push i r))
- r)))
- "{"))
- (TeX-command-region-begin (save-excursion
- (re-search-backward rx nil t)
- (point)))
- (TeX-command-region-end (save-excursion
- (re-search-forward rx nil t)
- (forward-line 0)
- (point))))
+ (let* ((bounds (LaTeX-command-section-boundaries))
+ (TeX-command-region-begin (car bounds))
+ (TeX-command-region-end (cdr bounds)))
(TeX-command-region override-confirm)))
+(defun TeX-command-run-all-region ()
+ "Compile the current region until an error occurs or it is finished."
+ (interactive)
+ (TeX-region-update)
+ (TeX-command-sequence t t #'TeX-region-file))
+
+(defun LaTeX-command-run-all-section ()
+ "Compile the current section until an error occurs or it is finished."
+ (interactive)
+ (let* ((bounds (LaTeX-command-section-boundaries))
+ (TeX-command-region-begin (car bounds))
+ (TeX-command-region-end (cdr bounds)))
+ (TeX-region-update))
+ (TeX-command-sequence t t #'TeX-region-file))
+
+(defun TeX-command-run-all (arg)
+ "Compile the current document until an error occurs or it is finished.
+With a prefix ARG (`C-u \\[TeX-command-run-all]'), compile the
+current region instead, e.g, call `TeX-command-run-all-region'.
+With multiple prefix arguments (`C-u C-u
+\\[TeX-command-run-all]'), compile the current section instead,
+e.g. call `LaTeX-command-run-all-section'."
+ (interactive "P")
+ (cond
+ ((null arg) (TeX-command-sequence t t))
+ ((= 4 (car arg)) (TeX-command-run-all-region))
+ (t (LaTeX-command-run-all-section))))
+
;;; Parsing
;;; - Global Parser Variables
@@ -2424,40 +2463,40 @@ a bad box."
(defcustom TeX-error-description-list
'(("\\(?:Package Preview Error\\|Preview\\):.*" .
-"The `auctex' option to `preview' should not be applied manually.
+ "The `auctex' option to `preview' should not be applied manually.
If you see this error message outside of a preview run, either
you did something too clever, or AUCTeX something too stupid.")
("Bad \\\\line or \\\\vector argument.*" .
-"The first argument of a \\line or \\vector command, which specifies the
+ "The first argument of a \\line or \\vector command, which specifies the
slope, is illegal\.")
("Bad math environment delimiter.*" .
-"TeX has found either a math-mode-starting command such as \\[ or \\(
+ "TeX has found either a math-mode-starting command such as \\[ or \\(
when it is already in math mode, or else a math-mode-ending command
such as \\) or \\] while in LR or paragraph mode. The problem is caused
by either unmatched math mode delimiters or unbalanced braces\.")
("Bad use of \\\\\\\\.*" .
-"A \\\\ command appears between paragraphs, where it makes no sense. This
+ "A \\\\ command appears between paragraphs, where it makes no sense. This
error message occurs when the \\\\ is used in a centering or flushing
environment or else in the scope of a centering or flushing
declaration.")
("\\\\begin{[^ ]*} ended by \\\\end{[^ ]*}." .
-"LaTeX has found an \\end command that doesn't match the corresponding
+ "LaTeX has found an \\end command that doesn't match the corresponding
\\begin command. You probably misspelled the environment name in the
\\end command, have an extra \\begin, or else forgot an \\end.")
("Can be used only in preamble." .
-"LaTeX has encountered, after the \\begin{document}, one of the
+ "LaTeX has encountered, after the \\begin{document}, one of the
following commands that should appear only in the preamble:
\\documentclass, \\nofiles, \\includeonly, \\makeindex, or
\\makeglossary. The error is also caused by an extra \\begin{document}
command.")
("Command name [^ ]* already used.*" .
-"You are using \\newcommand, \\newenvironment, \\newlength, \\newsavebox,
+ "You are using \\newcommand, \\newenvironment, \\newlength, \\newsavebox,
or \\newtheorem to define a command or environment name that is
already defined, or \\newcounter to define a counter that already
exists. (Defining an environment named gnu automatically defines the
@@ -2465,7 +2504,7 @@ command \\gnu.) You'll have to choose a new name or, in
the case of
\\newcommand or \\newenvironment, switch to the \\renew ... command.")
("Counter too large." .
-"1. Some object that is numbered with letters, probably an item in a
+ "1. Some object that is numbered with letters, probably an item in a
enumerated list, has received a number greater than 26. Either you're
making a very long list or you've been resetting counter values.
@@ -2474,11 +2513,11 @@ and LaTeX has run out of letters or symbols. This is
probably caused
by too many \\thanks commands.")
("Environment [^ ]* undefined." .
-"LaTeX has encountered a \\begin command for a nonexistent environment.
+ "LaTeX has encountered a \\begin command for a nonexistent environment.
You probably misspelled the environment name. ")
("Float(s) lost." .
-"You put a figure or table environment or a \\marginpar command inside a
+ "You put a figure or table environment or a \\marginpar command inside a
parbox---either one made with a minipage environment or \\parbox
command, or one constructed by LaTeX in making a footnote, figure,
etc. This is an outputting error, and the offending environment or
@@ -2487,70 +2526,70 @@ the problem. One or more figures, tables, and/or
marginal notes have
been lost, but not necessarily the one that caused the error.")
("Illegal character in array arg." .
-"There is an illegal character in the argument of an array or tabular
+ "There is an illegal character in the argument of an array or tabular
environment, or in the second argument of a \\multicolumn command.")
("Missing \\\\begin{document}." .
-"LaTeX produced printed output before encountering a \\begin{document}
+ "LaTeX produced printed output before encountering a \\begin{document}
command. Either you forgot the \\begin{document} command or there is
something wrong in the preamble. The problem may be a stray character
or an error in a declaration---for example, omitting the braces around
an argument or forgetting the \\ in a command name.")
("Missing p-arg in array arg.*" .
-"There is a p that is not followed by an expression in braces in the
+ "There is a p that is not followed by an expression in braces in the
argument of an array or tabular environment, or in the second argument
of a \\multicolumn command.")
("Missing @-exp in array arg." .
-"There is an @ character not followed by an @-expression in the
+ "There is an @ character not followed by an @-expression in the
argument of an array or tabular environment, or in the second argument
of a \\multicolumn command.")
("No such counter." .
-"You have specified a nonexistent counter in a \\setcounter or
+ "You have specified a nonexistent counter in a \\setcounter or
\\addtocounter command. This is probably caused by a simple typing
error. However, if the error occurred while a file with the extension
aux is being read, then you probably used a \\newcounter command
outside the preamble.")
("Not in outer par mode." .
-"You had a figure or table environment or a \\marginpar command in math
+ "You had a figure or table environment or a \\marginpar command in math
mode or inside a parbox.")
("\\\\pushtabs and \\\\poptabs don't match." .
-"LaTeX found a \\poptabs with no matching \\pushtabs, or has come to the
+ "LaTeX found a \\poptabs with no matching \\pushtabs, or has come to the
\\end{tabbing} command with one or more unmatched \\pushtabs commands.")
("Something's wrong--perhaps a missing \\\\item." .
-"The most probable cause is an omitted \\item command in a list-making
+ "The most probable cause is an omitted \\item command in a list-making
environment. It is also caused by forgetting the argument of a
thebibliography environment.")
("Tab overflow." .
-"A \\= command has exceeded the maximum number of tab stops that LaTeX
+ "A \\= command has exceeded the maximum number of tab stops that LaTeX
permits.")
("There's no line here to end." .
-"A \\newline or \\\\ command appears between paragraphs, where it makes no
+ "A \\newline or \\\\ command appears between paragraphs, where it makes no
sense. If you're trying to ``leave a blank line'', use a \\vspace
command.")
("This may be a LaTeX bug." .
-"LaTeX has become thoroughly confused. This is probably due to a
+ "LaTeX has become thoroughly confused. This is probably due to a
previously detected error, but it is possible that you have found an
error in LaTeX itself. If this is the first error message produced by
the input file and you can't find anything wrong, save the file and
contact the person listed in your Local Guide.")
("Too deeply nested." .
-"There are too many list-making environments nested within one another.
+ "There are too many list-making environments nested within one another.
How many levels of nesting are permitted may depend upon what computer
you are using, but at least four levels are provided, which should be
enough.")
("Too many unprocessed floats." .
-"While this error can result from having too many \\marginpar commands
+ "While this error can result from having too many \\marginpar commands
on a page, a more likely cause is forcing LaTeX to save more figures
and tables than it has room for. When typesetting its continuous
scroll, LaTeX saves figures and tables separately and inserts them as
@@ -2566,38 +2605,38 @@ argument says it must go. This is likely to happen if
the argument
does not contain a p option.")
("Undefined tab position." .
-"A \\>, \\+, \\-, or \\< command is trying to go to a nonexistent tab
+ "A \\>, \\+, \\-, or \\< command is trying to go to a nonexistent tab
position---one not defined by a \\= command.")
("\\\\< in mid line." .
-"A \\< command appears in the middle of a line in a tabbing environment.
+ "A \\< command appears in the middle of a line in a tabbing environment.
This command should come only at the beginning of a line.")
("Double subscript." .
-"There are two subscripts in a row in a mathematical
+ "There are two subscripts in a row in a mathematical
formula---something like x_{2}_{3}, which makes no sense.")
("Double superscript." .
-"There are two superscripts in a row in a mathematical
+ "There are two superscripts in a row in a mathematical
formula---something like x^{2}^{3}, which makes no sense.")
("Extra alignment tab has been changed to \\\\cr." .
-"There are too many separate items (column entries) in a single row of
+ "There are too many separate items (column entries) in a single row of
an array or tabular environment. In other words, there were too many &
's before the end of the row. You probably forgot the \\\\ at the end of
the preceding row.")
("Extra \\}, or forgotten \\$." .
-"The braces or math mode delimiters don't match properly. You probably
+ "The braces or math mode delimiters don't match properly. You probably
forgot a {, \\[, \\(, or $.")
("Font [^ ]* not loaded: Not enough room left." .
-"The document uses more fonts than TeX has room for. If different parts
+ "The document uses more fonts than TeX has room for. If different parts
of the document use different fonts, then you can get around the
problem by processing it in parts.")
("I can't find file `.*'." .
-"TeX can't find a file that it needs. If the name of the missing file
+ "TeX can't find a file that it needs. If the name of the missing file
has the extension tex, then it is looking for an input file that you
specified---either your main file or another file inserted with an
\\input or \\include command. If the missing file has the extension sty
@@ -2605,7 +2644,7 @@ specified---either your main file or another file
inserted with an
option.")
("Illegal parameter number in definition of .*" .
-"This is probably caused by a \\newcommand, \\renewcommand,
+ "This is probably caused by a \\newcommand, \\renewcommand,
\\newenvironment, or \\renewenvironment command in which a # is used
incorrectly. A # character, except as part of the command name \\#,
can be used only to indicate an argument parameter, as in #2, which
@@ -2615,7 +2654,7 @@ like #2 in the last argument of a \\newenvironment or
\\renewenvironment
command.")
("Illegal unit of measure ([^ ]* inserted)." .
-"If you just got a
+ "If you just got a
! Missing number, treated as zero.
@@ -2627,16 +2666,16 @@ should result in correct output. However, the error can
also be caused
by omitting a command argument.")
("Misplaced alignment tab character \\&." .
-"The special character &, which should be used only to separate items
+ "The special character &, which should be used only to separate items
in an array or tabular environment, appeared in ordinary text. You
probably meant to type \\&.")
("Missing control sequence inserted." .
-"This is probably caused by a \\newcommand, \\renewcommand, \\newlength,
+ "This is probably caused by a \\newcommand, \\renewcommand, \\newlength,
or \\newsavebox command whose first argument is not a command name.")
("Missing number, treated as zero." .
-"This is usually caused by a LaTeX command expecting but not finding
+ "This is usually caused by a LaTeX command expecting but not finding
either a number or a length as an argument. You may have omitted an
argument, or a square bracket in the text may have been mistaken for
the beginning of an optional argument. This error is also caused by
@@ -2644,11 +2683,11 @@ putting \\protect in front of either a length command
or a command such
as \\value that produces a number.")
("Missing [{}] inserted." .
-"TeX has become confused. The position indicated by the error locator
+ "TeX has become confused. The position indicated by the error locator
is probably beyond the point where the incorrect input is.")
("Missing \\$ inserted." .
-"TeX probably found a command that can be used only in math mode when
+ "TeX probably found a command that can be used only in math mode when
it wasn't in math mode. Remember that unless stated otherwise, all
all the commands of Section 3.3 in LaTeX Book (Lamport) can be used
only in math mode. TeX is not in math mode when it begins processing
@@ -2657,28 +2696,28 @@ math environment. This error also occurs if TeX
encounters a blank
line when it is in math mode.")
("Not a letter." .
-"Something appears in the argument of a \\hyphenation command that
+ "Something appears in the argument of a \\hyphenation command that
doesn't belong there.")
("Paragraph ended before [^ ]* was complete." .
-"A blank line occurred in a command argument that shouldn't contain
+ "A blank line occurred in a command argument that shouldn't contain
one. You probably forgot the right brace at the end of an argument.")
("\\\\[^ ]*font [^ ]* is undefined .*" .
-"These errors occur when an uncommon font is used in math mode---for
+ "These errors occur when an uncommon font is used in math mode---for
example, if you use a \\sc command in a formula inside a footnote,
calling for a footnote-sized small caps font. This problem is solved
by using a \\load command.")
("Font .* not found." .
-"You requested a family/series/shape/size combination that is totally
+ "You requested a family/series/shape/size combination that is totally
unknown. There are two cases in which this error can occur:
1) You used the \\size macro to select a size that is not available.
2) If you did not do that, go to your local `wizard' and
complain fiercely that the font selection tables are corrupted!")
("TeX capacity exceeded, sorry .*" .
-"TeX has just run out of space and aborted its execution. Before you
+ "TeX has just run out of space and aborted its execution. Before you
panic, remember that the least likely cause of this error is TeX not
having the capacity to process your document. It was probably an
error in your input file that caused TeX to run out of room. The
@@ -2779,14 +2818,14 @@ turn has a \\footnotesize declaration whose scope
contains a \\multiput
command containing a ....")
("Text line contains an invalid character." .
-"The input contains some strange character that it shouldn't. A mistake
+ "The input contains some strange character that it shouldn't. A mistake
when creating the file probably caused your text editor to insert this
character. Exactly what could have happened depends upon what text
editor you used. If examining the input file doesn't reveal the
offending character, consult the Local Guide for suggestions.")
("Undefined control sequence." .
-"TeX encountered an unknown command name. You probably misspelled the
+ "TeX encountered an unknown command name. You probably misspelled the
name. If this message occurs when a LaTeX command is being processed,
the command is probably in the wrong place---for example, the error
can be produced by an \\item command that's not inside a list-making
@@ -2794,43 +2833,43 @@ environment. The error can also be caused by a missing
\\documentclass
command.")
("Use of [^ ]* doesn't match its definition." .
-"It's probably one of the picture-drawing commands, and you have used
+ "It's probably one of the picture-drawing commands, and you have used
the wrong syntax for specifying an argument. If it's address@hidden that
doesn't match its definition, then there is something wrong in an
@-expression in the argument of an array or tabular
environment---perhaps a fragile command that is not \\protect'ed.")
("You can't use `macro parameter character \\#' in [^ ]* mode." .
-"The special character # has appeared in ordinary text. You probably
+ "The special character # has appeared in ordinary text. You probably
meant to type \\#.")
("Overfull \\\\hbox .*" .
-"Because it couldn't find a good place for a line break, TeX put more
+ "Because it couldn't find a good place for a line break, TeX put more
on this line than it should.")
("Overfull \\\\vbox .*" .
-"Because it couldn't find a good place for a page break, TeX put more
+ "Because it couldn't find a good place for a page break, TeX put more
on the page than it should. ")
("Underfull \\\\hbox .*" .
-"Check your output for extra vertical space. If you find some, it was
+ "Check your output for extra vertical space. If you find some, it was
probably caused by a problem with a \\\\ or \\newline command---for
example, two \\\\ commands in succession. This warning can also be
caused by using the sloppypar environment or \\sloppy declaration, or
by inserting a \\linebreak command.")
("Underfull \\\\vbox .*" .
-"TeX could not find a good place to break the page, so it produced a
+ "TeX could not find a good place to break the page, so it produced a
page without enough text on it. ")
-;; New list items should be placed here
-;;
-;; ("err-regexp" . "context")
-;;
-;; the err-regexp item should match anything
+ ;; New list items should be placed here
+ ;;
+ ;; ("err-regexp" . "context")
+ ;;
+ ;; the err-regexp item should match anything
(".*" . "No help available")) ; end definition
-"A list of the form (\"err-regexp\" . \"context\") used by function
+ "A list of the form (\"err-regexp\" . \"context\") used by function
`TeX-help-error' to display help-text on an error message or warning.
err-regexp should be a regular expression matching the error message
given from TeX/LaTeX, and context should be some lines describing that
@@ -3049,7 +3088,7 @@ forward, if negative)."
"List of errors to be used in the error overview.")
(define-derived-mode TeX-error-overview-mode tabulated-list-mode
- "TeX errors"
+ "TeX errors"
"Major mode for listing TeX errors."
(setq tabulated-list-format [("File" 25 nil)
("Line" 4 nil :right-align t)
@@ -3185,13 +3224,13 @@ forward, if negative)."
"Keymap for `TeX-output-mode'.")
(define-derived-mode TeX-output-mode TeX-special-mode "TeX Output"
- "Major mode for viewing TeX output.
+ "Major mode for viewing TeX output.
\\{TeX-output-mode-map} "
- :syntax-table nil
- (set (make-local-variable 'revert-buffer-function)
- #'TeX-output-revert-buffer)
- ;; special-mode makes it read-only which prevents input from TeX.
- (setq buffer-read-only nil))
+ :syntax-table nil
+ (set (make-local-variable 'revert-buffer-function)
+ #'TeX-output-revert-buffer)
+ ;; special-mode makes it read-only which prevents input from TeX.
+ (setq buffer-read-only nil))
(defun TeX-output-revert-buffer (ignore-auto noconfirm)
"Rerun the TeX command which of which this buffer was the output."
diff --git a/tex.el b/tex.el
index 67e94a7..fa2c475 100644
--- a/tex.el
+++ b/tex.el
@@ -575,6 +575,10 @@ the name of the file being processed, with an optional
extension."
(autoload 'TeX-command-region "tex-buf" nil t)
(autoload 'TeX-command-buffer "tex-buf" nil t)
(autoload 'TeX-command-master "tex-buf" nil t)
+(autoload 'LaTeX-command-section "tex-buf" nil t)
+(autoload 'TeX-command-run-all "tex-buf" nil t)
+(autoload 'TeX-command-run-all-region "tex-buf" nil t)
+(autoload 'LaTeX-command-run-all-section "tex-buf" nil t)
(autoload 'TeX-command "tex-buf" nil nil)
(autoload 'TeX-kill-job "tex-buf" nil t)
(autoload 'TeX-recenter-output-buffer "tex-buf" nil t)
@@ -2086,11 +2090,6 @@ output files."
(delete-file (concat master-dir file))))
(message "No files to be deleted"))))
-(defun TeX-command-run-all ()
- "Compile the current document until an error occurs or it is finished."
- (interactive)
- (TeX-command-sequence t t))
-
;;; Master File
(defcustom TeX-master t
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 10 +++
tex-buf.el | 229 +++++++++++++++++++++++++++++++++++-------------------------
tex.el | 9 +--
3 files changed, 148 insertions(+), 100 deletions(-)
hooks/post-receive
--
GNU AUCTeX
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [AUCTeX-diffs] GNU AUCTeX branch, master, updated. 22c7d9fb60ddc71102d41ea45dcad5493202ff70,
Tassilo Horn <=