|
| From: | Dirk Wahrheit |
| Subject: | [Ant-phone-devel] Problem Ant-Phone does not react on busy lines at internal calls |
| Date: | Wed, 31 Mar 2004 20:25:39 +0200 |
|
Hi, maybe here somebody can help, I even tried with
Ronald 1,5hrs by phone, but we could not solve. So, you are our last hope J. Equ. PIV 2,x Ghz, SuSE 9.0, ISDN Card Fritz!PCI V.2.0 (installed
with AVM CAPI-Diver). Ant-phone Version 0.15 – 0.19 The Card is connected to a local telephone machine
(Agfeo AS40 or Siemens HiCom with internal S0-Busses and analog devices) At Agfeo: If I call a person, which is phoning external I get “busy”
If this guy now phones intenal I get the “waiting for the one to pic up the
phone” dialtone…. If I use a “standard” S0-Telefone
(Hardware) I get busy. At Siemens: If the one calls external or internal I always get the
“waiting for the one to pic up the phone” dialtone…. If I use a “standard” S0-Telefone
(Hardware) I get busy. DEBUG LOG: Initializing ISDN device... Init OK. Using calls file listed in I4L config. Using /var/log/isdn.log as source for isdnlog data. New state: STATE_READY Initializing /dev/dsp ... session_audio_open: Opening audio device(s). New state: STATE_DIALING Closing sound device(s)... New state: STATE_READY à here I have the “waiting for the one to pic up the phone”
dialtone…. à Now I click “hangup” and get: | Unknown message from ISDN device in READY mode: |NO CARRIER Unknown message from ISDN device in READY mode: NO
CARRIER Closing ISDN device... Quit OK. Setting "HistorySize" to "10"... Setting "CallerIDSize" to "100"... Setting "SaveOptions" to "1"... Setting "ExecOnIncoming" to ""... Setting "PopupOnIncoming" to
"1"... Setting "AudioDeviceIn" to "/dev/dsp"... Setting "AudioDeviceOut" to
"/dev/dsp"... Setting "ReleaseAudioDevices" to
"1"... Setting "IdentifyingMSN" to
"123"... Setting "ListenOnMSNs" to "*"... Setting "ShowCallerID" to "1"... Setting "ShowLLCheckers" to "1"... Setting "ShowControlPad" to "1"... Setting "Muted" to "0"... Setting "RecordToFile" to "0"... Setting "RecordLocalChannel" to
"1"... Setting "RecordRemoteChannel" to
"1"... Setting "RecordingFormat" to
"wav"... Setting "RecordingEncoding" to
"ulaw"... Setting "PresetName0" to "Preset
1"... Setting "PresetNumber0" to ""... Setting "PresetName1" to "Preset
2"... Setting "PresetNumber1" to ""... Setting "PresetName2" to "Preset
3"... Setting "PresetNumber2" to ""... Setting "PresetName3" to "Preset
4"... Setting "PresetNumber3" to ""... Setting "MergeIsdnlog" to "1"... Setting "MergeIsdnlogDays" to
"10"... Info: History Filename: /root/.ant-phone/history. Info: History Number: 52. Info: History Number: 52. Info: History Number: 52. Info: History Number: 52. Info: History Number: 52. Info: History Number: 52. Info: History Number: 52. Info: History Number: 83. Info: History Number: 52. Info: History Number: 52. session_audio_close: Closing audio device(s). Does somebody know this? Please help and sent me a Email CC. Thanks a lot! |
| [Prev in Thread] | Current Thread | [Next in Thread] |