diff -ruN -x autom4te.cache xbubble-0.2/ABOUT-NLS xbubble-0.2.i18n/ABOUT-NLS
--- xbubble-0.2/ABOUT-NLS 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/ABOUT-NLS 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,435 @@
+Notes on the Free Translation Project
+*************************************
+
+ Free software is going international! The Free Translation Project
+is a way to get maintainers of free software, translators, and users all
+together, so that will gradually become able to speak many languages.
+A few packages already provide translations for their messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work at translations should contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+Quick configuration advice
+==========================
+
+ If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+INSTALL Matters
+===============
+
+ Some packages are "localizable" when properly installed; the
+programs they contain can be made to speak your own native language.
+Most such packages use GNU `gettext'. Other packages have their own
+ways to internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the GNU `gettext' own
+library will be used. This library is wholly contained within this
+package, usually in the `intl/' subdirectory, so prior installation of
+the GNU `gettext' package is _not_ required. Installers may use
+special options at configuration time for changing the default
+behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might be not what is desirable. You
+should use the more recent version of the GNU `gettext' library. I.e.
+if the file `intl/VERSION' shows that the library which comes with this
+package is more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages have usually many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+Using This Package
+==================
+
+ As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your country by running the command
+`locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+Translating Teams
+=================
+
+ For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to address@hidden', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to address@hidden' to reach the
+coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skill are praised more than
+programming skill, here.
+
+Available Packages
+==================
+
+ Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of August
+2002. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files be bg ca cs da de el en eo es et fi fr
+ +----------------------------------------+
+ a2ps | [] [] [] [] |
+ ap-utils | |
+ bash | [] [] [] [] |
+ bfd | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] [] |
+ clisp | |
+ clisp | [] [] [] [] |
+ clisplow | |
+ cpio | [] [] [] [] |
+ darkstat | () |
+ diffutils | [] [] [] [] [] [] |
+ enscript | [] [] |
+ error | [] [] [] |
+ fetchmail | [] () [] [] [] () |
+ fileutils | [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ gas | [] [] |
+ gawk | [] [] [] |
+ gcal | [] [] |
+ gcc | [] [] |
+ gettext | [] [] [] [] [] |
+ gnupg | [] [] [] [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () () () () () |
+ grep | [] [] [] [] [] [] [] [] |
+ gretl | [] |
+ gthumb | () () () |
+ hello | [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] |
+ indent | [] [] [] [] [] |
+ jpilot | () [] [] [] |
+ jwhois | [] [] |
+ kbd | [] [] [] |
+ ld | [] [] |
+ libc | [] [] [] [] [] [] [] [] |
+ libiconv | [] [] [] [] |
+ lifelines | () () |
+ lilypond | [] [] |
+ lingoteach | [] [] |
+ lingoteach_lessons| () () |
+ lynx | [] [] [] [] [] |
+ m4 | [] [] [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] () () [] () () |
+ mysecretdiary | [] [] [] |
+ nano | [] () [] [] [] [] |
+ nano_1_0 | [] () [] [] [] [] |
+ opcodes | [] [] [] |
+ parted | [] [] [] [] [] |
+ ptx | [] [] [] [] [] [] [] |
+ python | |
+ recode | [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] |
+ sketch | () [] () |
+ soundtracker | [] [] [] |
+ sp | [] |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] [] [] [] [] |
+ textutils | [] [] [] [] [] |
+ util-linux | [] [] [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] [] [] |
+ +----------------------------------------+
+ be bg ca cs da de el en eo es et fi fr
+ 0 2 19 10 30 44 9 1 12 44 17 6 53
+
+ gl he hr hu id it ja ko lv nb nl nn
+ +-------------------------------------+
+ a2ps | () () [] |
+ ap-utils | |
+ bash | [] |
+ bfd | [] |
+ binutils | [] |
+ bison | [] [] [] [] |
+ clisp | |
+ clisp | [] |
+ clisplow | |
+ cpio | [] [] [] [] |
+ darkstat | |
+ diffutils | [] [] [] [] [] |
+ enscript | [] [] |
+ error | [] |
+ fetchmail | [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] [] [] [] |
+ flex | [] |
+ gas | |
+ gawk | [] |
+ gcal | |
+ gcc | [] |
+ gettext | [] [] |
+ gnupg | [] [] [] [] |
+ gprof | [] |
+ gpsdrive | [] () () |
+ grep | [] [] [] [] [] [] [] |
+ gretl | |
+ gthumb | () () |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] |
+ indent | [] [] [] [] |
+ jpilot | () () |
+ jwhois | [] [] |
+ kbd | |
+ ld | |
+ libc | [] [] [] [] |
+ libiconv | [] [] [] |
+ lifelines | |
+ lilypond | [] |
+ lingoteach | [] |
+ lingoteach_lessons| |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ make | [] [] [] [] [] [] |
+ man-db | () () |
+ mysecretdiary | [] |
+ nano | [] [] [] [] |
+ nano_1_0 | [] [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] |
+ ptx | [] [] [] [] [] |
+ python | |
+ recode | [] [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] |
+ sharutils | [] [] [] |
+ sketch | () |
+ soundtracker | [] [] |
+ sp | |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] [] [] |
+ textutils | [] [] [] [] |
+ util-linux | () [] |
+ vorbis-tools | [] |
+ wastesedge | |
+ wdiff | [] [] [] |
+ wget | [] [] [] [] [] [] |
+ +-------------------------------------+
+ gl he hr hu id it ja ko lv nb nl nn
+ 23 9 12 19 16 13 26 9 1 7 19 3
+
+ no pl pt pt_BR ru sk sl sv tr uk zh_CN zh_TW
+ +----------------------------------------------+
+ a2ps | () () () [] [] [] [] [] | 10
+ ap-utils | () | 0
+ bash | [] | 6
+ bfd | [] [] | 5
+ binutils | [] [] | 5
+ bison | [] [] [] [] | 12
+ clisp | | 0
+ clisp | | 5
+ clisplow | | 0
+ cpio | [] [] [] [] | 12
+ darkstat | [] [] () () | 2
+ diffutils | [] [] [] [] [] [] | 17
+ enscript | [] [] [] [] | 8
+ error | [] [] [] | 7
+ fetchmail | () () [] | 6
+ fileutils | [] [] [] [] [] [] | 14
+ findutils | [] [] [] [] [] [] [] | 21
+ flex | [] [] [] | 9
+ gas | [] | 3
+ gawk | [] [] | 6
+ gcal | [] [] | 4
+ gcc | [] | 4
+ gettext | [] [] [] [] [] [] | 13
+ gnupg | [] [] [] | 14
+ gprof | [] [] | 5
+ gpsdrive | [] [] | 3
+ grep | [] [] [] [] [] | 20
+ gretl | | 1
+ gthumb | () () [] | 1
+ hello | [] [] [] [] [] [] [] | 28
+ id-utils | [] [] [] [] | 9
+ indent | [] [] [] [] [] | 14
+ jpilot | () () [] [] | 5
+ jwhois | [] () () [] [] | 7
+ kbd | [] [] | 5
+ ld | [] [] | 4
+ libc | [] [] [] [] [] [] | 18
+ libiconv | [] [] [] [] [] | 12
+ lifelines | [] | 1
+ lilypond | [] | 4
+ lingoteach | [] [] | 5
+ lingoteach_lessons| () | 0
+ lynx | [] [] [] [] | 13
+ m4 | [] [] [] [] | 13
+ make | [] [] [] [] [] | 15
+ man-db | | 3
+ mysecretdiary | [] [] [] | 7
+ nano | [] [] [] [] | 13
+ nano_1_0 | [] [] [] [] | 14
+ opcodes | [] [] [] | 8
+ parted | [] [] [] [] | 12
+ ptx | [] [] [] [] [] [] [] | 19
+ python | | 0
+ recode | [] [] [] [] [] [] | 15
+ sed | [] [] [] [] [] [] | 24
+ sh-utils | [] [] | 9
+ sharutils | [] [] [] [] | 14
+ sketch | [] () [] | 4
+ soundtracker | [] | 6
+ sp | | 1
+ tar | [] [] [] [] [] [] [] | 19
+ texinfo | [] [] | 10
+ textutils | [] [] [] [] [] | 14
+ util-linux | [] [] [] | 10
+ vorbis-tools | [] | 3
+ wastesedge | | 0
+ wdiff | [] [] [] [] [] | 14
+ wget | [] [] [] [] [] [] [] [] | 24
+ +----------------------------------------------+
+ 37 teams no pl pt pt_BR ru sk sl sv tr uk zh_CN zh_TW
+ 68 domains 4 15 2 28 28 12 10 49 43 4 1 9 609
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If August 2002 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+ If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+to use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
address@hidden' to make the `.pot' files available to
+the translation teams.
+
diff -ruN -x autom4te.cache xbubble-0.2/aclocal.m4 xbubble-0.2.i18n/aclocal.m4
--- xbubble-0.2/aclocal.m4 2002-08-22 14:41:23.000000000 +0200
+++ xbubble-0.2.i18n/aclocal.m4 2003-04-09 12:25:54.000000000 +0200
@@ -1,70 +1,265 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
+# generated automatically by aclocal 1.7.3 -*- Autoconf -*-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 1
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+AC_PREREQ([2.54])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.7.3])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
#
# Check to make sure that the build environment is sane.
#
-AC_DEFUN(AM_SANITY_CHECK,
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
+ set X `ls -t $srcdir/configure conftest.file`
fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
@@ -74,7 +269,7 @@
alias in your environment])
fi
- test "[$]2" = conftestfile
+ test "$[2]" = conftest.file
)
then
# Ok.
@@ -83,22 +278,2466 @@
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-rm -f conftest*
AC_MSG_RESULT(yes)])
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
+# -*- Autoconf -*-
+
+
+# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
fi
-AC_SUBST($1)])
+])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+# Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# -*- Autoconf -*-
+# Copyright (C) 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# serial 5 -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ echo '#include "conftest.h"' > conftest.c
+ echo 'int i;' > conftest.h
+ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=conftest.c object=conftest.o \
+ depfile=conftest.Po tmpdepfile=conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep conftest.h conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored.
+ if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+ @echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 5
+
+AC_PREREQ(2.52)
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+# gettext.m4 serial 17 (gettext-0.11.5)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper
, 1995-2000.
+dnl Bruno Haible , 2000-2002.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define(gt_included_intl, ifelse([$1], [external], [no], [yes]))
+ define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], []))
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ dnl Add a version number to the cache macros.
+ define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
+ define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
+ define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
+
+ AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ dnl Now see whether libintl exists and depends on libiconv.
+ if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext_libintl=yes
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+ && test "$PACKAGE" != gettext; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(INTLOBJS)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl Checks for all prerequisites of the po subdirectory,
+dnl except for USE_NLS.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Search for GNU xgettext 0.11 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ AC_MSG_RESULT(
+ [found $GMSGFMT program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+ fi
+
+ AC_OUTPUT_COMMANDS([
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ fi
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ GMOFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([jm_GLIBC21])dnl
+ AC_REQUIRE([gt_INTDIV0])dnl
+ AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
+ AC_REQUIRE([gt_INTTYPES_PRI])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
+
+ AM_ICONV
+ AM_LANGINFO_CODESET
+ if test $ac_cv_header_locale_h = yes; then
+ AM_LC_MESSAGES
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+])
+
+
+AC_DEFUN([AM_MKINSTALLDIRS],
+[
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+ dnl Try to locate is.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+
+# lib-prefix.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+# lib-link.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L,
+dnl sys_lib_search_path_spec, sys_lib_dlsearch_path_spec.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+# lib-ld.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 &5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
+
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include
+#include ],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include
+#include ],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include
+#include
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
+
+# progtest.m4 serial 2 (gettext-0.10.40)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper , 1996.
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
+# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([jm_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
+
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+ gt_cv_int_divbyzero_sigfpe,
+ [
+ AC_TRY_RUN([
+#include
+#include
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+ [
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i[34567]86 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
+ ])
+ ])
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+ [Define if integer division by zero raises signal SIGFPE.])
+])
+
+# uintmax_t.m4 serial 6 (gettext-0.11)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to `unsigned long' or `unsigned long long'
+# if does not exist.
+
+AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if and don't define.])
+ fi
+])
+
+# inttypes_h.m4 serial 4 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists,
+# doesn't clash with , and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include
+#include ],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+[Define if exists, doesn't clash with ,
+ and declares uintmax_t. ])
+ fi
+])
+
+# stdint_h.m4 serial 2 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if exists,
+# doesn't clash with , and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include
+#include ],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_stdint_h=yes,
+ jm_ac_cv_header_stdint_h=no)])
+ if test $jm_ac_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+[Define if exists, doesn't clash with ,
+ and declares uintmax_t. ])
+ fi
+])
+
+# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40)
+dnl Copyright (C) 1999-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the unsigned long long type.])
+ fi
+])
+
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if exists and doesn't clash with
+# .
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include
+#include ],
+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+ ])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if exists and doesn't clash with .])
+ fi
+])
+
+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if exists and defines the PRI*
+# macros to non-string values. This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+ gt_cv_inttypes_pri_broken,
+ [
+ AC_TRY_COMPILE([#include
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+ ])
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+ [Define if exists and defines unusable PRI* macros.])
+ fi
+])
+
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include ],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have and nl_langinfo(CODESET).])
+ fi
+])
+
+# lcmessage.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper , 1995.
+
+# Check whether LC_MESSAGES is available in .
+
+AC_DEFUN([AM_LC_MESSAGES],
+[
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include ], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your file defines LC_MESSAGES.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/AUTHORS xbubble-0.2.i18n/AUTHORS
--- xbubble-0.2/AUTHORS 2002-08-22 14:40:51.000000000 +0200
+++ xbubble-0.2.i18n/AUTHORS 2003-04-09 10:05:57.000000000 +0200
@@ -1 +1,2 @@
Ivan Djelic
+Martin Quinson
diff -ruN -x autom4te.cache xbubble-0.2/autogen-timestamp xbubble-0.2.i18n/autogen-timestamp
--- xbubble-0.2/autogen-timestamp 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/autogen-timestamp 2003-04-09 12:26:00.000000000 +0200
@@ -0,0 +1 @@
+mer avr 9 12:26:00 CEST 2003
diff -ruN -x autom4te.cache xbubble-0.2/bootstrap xbubble-0.2.i18n/bootstrap
--- xbubble-0.2/bootstrap 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/bootstrap 2003-04-09 10:09:47.000000000 +0200
@@ -0,0 +1,153 @@
+#!/bin/sh
+
+######
+###### Some defs
+######
+
+PKG_NAME="xbubble"
+# a list of all dirs containing possibly some macros
+acmacrodirs="${HOME}/share/aclocal ${PWD}/tools/acmacro ${PWD}/m4"
+
+######
+###### End of conf part
+######
+for dir in $acmacrodirs ; do
+ if test -d $dir ; then
+ aclocalinclude="$aclocalinclude -I $dir";
+ fi
+done
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+echo "Autoregenerate package \`$PKG_NAME' in directory \`$srcdir'";
+
+(test -f $srcdir/configure.in \
+ && test -f $srcdir/src/board.c) || {
+ echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
+ echo " top-level $PKG_NAME directory"
+ exit 1
+}
+
+######
+###### Some tests (borrowed from Mt who borrowed it from
+###### macros/autogen.sh from achtung)
+######
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`autoconf' installed to compile $PKG_NAME."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`libtool' installed to compile $PKG_NAME."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.4.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ }
+}
+
+(automake-1.7 --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`automake' 1.7 installed to compile $PKG_NAME."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.7.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ NO_AUTOMAKE=yes
+}
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: Missing \`aclocal'. The version of \`automake'"
+ echo "installed doesn't appear recent enough."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+}
+
+if test "$DIE" -eq 1; then
+ exit 1
+fi
+###### END of test part
+
+
+######
+###### Action part
+######
+if test -z "$*"; then
+ echo "**Warning**: I am going to run \`configure' with no arguments."
+ echo "If you wish to pass any to it, please specify them on the"
+ echo \`$0\'" command line."
+ echo
+fi
+echo "Generating configuration files for xbubble, please wait...."
+echo;
+
+case $CC in
+xlc )
+ am_opt=--include-deps;;
+esac
+
+#for coin in `find $srcdir -name configure.ac -print `\
+# `find $srcdir -name configure.in -print`
+for coin in $srcdir/configure.in
+do
+ dr=`dirname $coin`
+ if test -f $dr/NO-AUTO-GEN; then
+ echo skipping $dr -- flagged as no auto-gen
+ else
+ echo "************"
+ echo "* Processing directory $dr"
+ echo "************"
+
+ if [ -e $dr/configure.in ] ; then
+ configfile="configure.in"
+ else
+ configfile="configure.ac"
+ fi
+ macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < $coin`
+ ( cd $dr
+ if grep "^AM_PROG_LIBTOOL" $configfile >/dev/null; then
+ if test -z "$NO_LIBTOOLIZE" ; then
+ echo "Running libtoolize --force --copy in "`pwd`"..."
+ libtoolize --force --copy
+ fi
+ fi
+ echo "Running aclocal-1.7 $aclocalinclude..."
+ aclocal-1.7 $aclocalinclude
+ if grep "^AM_CONFIG_HEADER" $configfile >/dev/null; then
+ echo "Running autoheader in "`pwd`"..."
+ autoheader
+ fi
+ echo "Running automake-1.7 --gnu --add-missing $am_opt ..."
+ automake-1.7 --gnu --add-missing $am_opt
+ echo "Running automake m4/Makefile ..."
+ automake m4/Makefile
+ echo "Running autoconf..."
+ autoconf
+ )
+ fi
+done
+
+conf_flags="--enable-maintainer-mode"
+
+if test x$NOCONFIGURE = x; then
+ echo "************"
+ echo "* Running $srcdir/configure $conf_flags $@ ..."
+ echo "************"
+
+ date>$srcdir/autogen-timestamp
+ $srcdir/configure $conf_flags "$@" || exit 1
+else
+ echo Skipping configure process.
+fi
+
+echo Now type \`make\' to compile $PKG_NAME
+
diff -ruN -x autom4te.cache xbubble-0.2/ChangeLog xbubble-0.2.i18n/ChangeLog
--- xbubble-0.2/ChangeLog 2002-08-22 15:19:14.000000000 +0200
+++ xbubble-0.2.i18n/ChangeLog 2003-04-09 10:05:13.000000000 +0200
@@ -1,3 +1,10 @@
+2003-04-09 gettextize
+
+ * Makefile.am (SUBDIRS): Add m4.
+ (ACLOCAL_AMFLAGS): New variable.
+ (EXTRA_DIST): New variable.
+ * configure.in (AC_OUTPUT): Add po/Makefile.in,
+
2002-07-09 Ivan
* xbubble.c : merged debian bugfix for PPC arch. ( debian bug #151291 )
diff -ruN -x autom4te.cache xbubble-0.2/config.rpath xbubble-0.2.i18n/config.rpath
--- xbubble-0.2/config.rpath 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/config.rpath 2002-08-14 11:40:38.000000000 +0200
@@ -0,0 +1,513 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2002 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit , 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+shlibext=
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ wl='-Wl,'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6*)
+ wl='-Wl,'
+ ;;
+ linux*)
+ echo '__INTEL_COMPILER' > conftest.$ac_ext
+ if $CC -E conftest.$ac_ext >/dev/null | grep __INTEL_COMPILER >/dev/null
+ then
+ :
+ else
+ # Intel icc
+ wl='-Qoption,ld,'
+ fi
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ if test "x$host_vendor" = xsni; then
+ wl='-LD'
+ else
+ wl='-Wl,'
+ fi
+ ;;
+ esac
+fi
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX, the GNU linker is very broken
+ ld_shlibs=no
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+ fi
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=yes
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ ;;
+ irix5* | irix6*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ if test "x$host_vendor" = xsno; then
+ hardcode_direct=yes # is this really true???
+ else
+ hardcode_direct=no # Motorola manual says yes, but my tests say they lie
+ fi
+ ;;
+ sysv4.3*)
+ ;;
+ sysv5*)
+ hardcode_libdir_flag_spec=
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4.2uw2*)
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ ;;
+ sysv5uw7* | unixware7*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+libname_spec='lib$name'
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+case "$host_os" in
+ aix3*)
+ shlibext=so
+ ;;
+ aix4* | aix5*)
+ shlibext=so
+ ;;
+ amigaos*)
+ shlibext=ixlibrary
+ ;;
+ beos*)
+ shlibext=so
+ ;;
+ bsdi4*)
+ shlibext=so
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ ;;
+ cygwin* | mingw* | pw32*)
+ case $GCC,$host_os in
+ yes,cygwin*)
+ shlibext=dll.a
+ ;;
+ yes,mingw*)
+ shlibext=dll
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+ ;;
+ yes,pw32*)
+ shlibext=dll
+ ;;
+ *)
+ shlibext=dll
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ shlibext=dylib
+ ;;
+ freebsd1*)
+ ;;
+ freebsd*)
+ shlibext=so
+ ;;
+ gnu*)
+ shlibext=so
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ shlibext=sl
+ ;;
+ irix5* | irix6*)
+ shlibext=so
+ case "$host_os" in
+ irix5*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ ;;
+ linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+ ;;
+ linux-gnu*)
+ shlibext=so
+ ;;
+ netbsd*)
+ shlibext=so
+ ;;
+ newsos6)
+ shlibext=so
+ ;;
+ openbsd*)
+ shlibext=so
+ ;;
+ os2*)
+ libname_spec='$name'
+ shlibext=dll
+ ;;
+ osf3* | osf4* | osf5*)
+ shlibext=so
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+ sco3.2v5*)
+ shlibext=so
+ ;;
+ solaris*)
+ shlibext=so
+ ;;
+ sunos4*)
+ shlibext=so
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ shlibext=so
+ case "$host_vendor" in
+ motorola)
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+ uts4*)
+ shlibext=so
+ ;;
+ dgux*)
+ shlibext=so
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ shlibext=so
+ fi
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_sys_lib_search_path_spec=`echo "X$sys_lib_search_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_sys_lib_dlsearch_path_spec=`echo "X$sys_lib_dlsearch_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' </dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
-# Defaults:
-ac_help=
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
- --with-x use the X Window System"
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="src/xbubble.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include
+#if HAVE_SYS_TYPES_H
+# include
+#endif
+#if HAVE_SYS_STAT_H
+# include
+#endif
+#if STDC_HEADERS
+# include
+# include
+#else
+# if HAVE_STDLIB_H
+# include
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include
+# endif
+# include
+#endif
+#if HAVE_STRINGS_H
+# include
+#endif
+#if HAVE_INTTYPES_H
+# include
+#else
+# if HAVE_STDINT_H
+# include
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS EGREP MKINSTALLDIRS MSGFMT GMSGFMT XGETTEXT MSGMERGE build build_cpu build_vendor build_os host host_cpu host_vendor host_os USE_NLS LIBICONV LTLIBICONV INTLLIBS LIBINTL LTLIBINTL POSUB LIBOBJS LTLIBOBJS'
+ac_subst_files=''
# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
+cache_file=/dev/null
exec_prefix=NONE
-host=NONE
no_create=
-nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
@@ -31,10 +327,15 @@
silent=
site=
srcdir=
-target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
@@ -48,17 +349,9 @@
infodir='${prefix}/info'
mandir='${prefix}/man'
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
ac_prev=
for ac_option
do
-
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
@@ -66,59 +359,59 @@
continue
fi
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
- case "$ac_option" in
+ case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
+ bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
+ ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
+ build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
- datadir="$ac_optarg" ;;
+ datadir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
-enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
+ eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -127,95 +420,47 @@
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
+ exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
-host | --host | --hos | --ho)
- ac_prev=host ;;
+ ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
+ host_alias=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
+ includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
+ infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
+ libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
+ libexecdir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
@@ -224,19 +469,19 @@
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
+ localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
+ mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
+ | --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
@@ -250,26 +495,26 @@
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
+ oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
+ prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
+ program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
+ program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
@@ -286,7 +531,7 @@
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
+ program_transform_name=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
@@ -296,7 +541,7 @@
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
+ sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
@@ -307,58 +552,57 @@
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
+ sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
+ site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
+ srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
+ sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
+ ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
+ target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13"
- exit 0 ;;
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "with_${ac_package}='$ac_optarg'" ;;
+ eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
@@ -369,99 +613,110 @@
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
+ x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
+ x_libraries=$ac_optarg ;;
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
;;
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
*)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
fi
-exec 5>./config.log
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
esac
done
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=src/xbubble.c
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
@@ -471,13 +726,453 @@
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
fi
fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+X features:
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors
+ --disable-rpath do not hardcode runtime library paths
+ --disable-nls do not use Native Language Support
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-x use the X Window System
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libintl-prefix=DIR search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L if you have libraries in a
+ nonstandard directory
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have
+ headers in a nonstandard directory
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.57. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core core.* *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
@@ -488,41 +1183,106 @@
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
else
- echo "creating cache $cache_file"
- > $cache_file
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
fi
ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says address@hidden
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+am__api_version="1.7"
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
@@ -533,14 +1293,20 @@
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -549,441 +1315,1010 @@
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:558: checking for a BSD compatible install" >&5
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
+ done
+ ;;
+esac
+done
+
fi
if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
+ INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
- INSTALL="$ac_install_sh"
+ INSTALL=$ac_install_sh
fi
fi
-echo "$ac_t""$INSTALL" 1>&6
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:611: checking whether build environment is sane" >&5
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
+ set X `ls -t $srcdir/configure conftest.file`
fi
- if test "$*" != "X $srcdir/configure conftestfile" \
- && test "$*" != "X conftestfile $srcdir/configure"; then
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
fi
- test "$2" = conftestfile
+ test "$2" = conftest.file
)
then
# Ok.
:
else
- { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+ test -n "$AWK" && break
+done
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:668: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftestmake <<\EOF
+ cat >conftest.make <<\_ACEOF
all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
-rm -f conftestmake
+rm -f conftest.make
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
SET_MAKE=
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
SET_MAKE="MAKE=${MAKE-make}"
fi
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+ # test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
-PACKAGE=xbubble
+# Define the identity of the package.
+ PACKAGE=xbubble
+ VERSION=0.2
-VERSION=0.2
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <>confdefs.h <<_ACEOF
#define PACKAGE "$PACKAGE"
-EOF
+_ACEOF
-cat >> confdefs.h <>confdefs.h <<_ACEOF
#define VERSION "$VERSION"
-EOF
+_ACEOF
+# Some tools Automake needs.
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:714: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
- ACLOCAL=aclocal
- echo "$ac_t""found" 1>&6
-else
- ACLOCAL="$missing_dir/missing aclocal"
- echo "$ac_t""missing" 1>&6
-fi
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:727: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
- echo "$ac_t""found" 1>&6
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- AUTOCONF="$missing_dir/missing autoconf"
- echo "$ac_t""missing" 1>&6
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:740: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
- AUTOMAKE=automake
- echo "$ac_t""found" 1>&6
-else
- AUTOMAKE="$missing_dir/missing automake"
- echo "$ac_t""missing" 1>&6
fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:753: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
- echo "$ac_t""found" 1>&6
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
else
- AUTOHEADER="$missing_dir/missing autoheader"
- echo "$ac_t""missing" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:766: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
- echo "$ac_t""found" 1>&6
+ STRIP=$ac_ct_STRIP
else
- MAKEINFO="$missing_dir/missing makeinfo"
- echo "$ac_t""missing" 1>&6
+ STRIP="$ac_cv_prog_STRIP"
fi
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+
+
-# Extract the first word of "gcc", so it can be a program name with args.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:783: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
else
- echo "$ac_t""no" 1>&6
+ CC="$ac_cv_prog_CC"
fi
+fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:813: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
- if test $# -gt 0; then
+ if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:864: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- ;;
- esac
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:896: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+ test -n "$ac_ct_CC" && break
+done
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+ CC=$ac_ct_CC
+fi
-cat > conftest.$ac_ext << EOF
+fi
-#line 907 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5
+ (eval $ac_compiler --version &5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5
+ (eval $ac_compiler -v &5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5
+ (eval $ac_compiler -V &5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:943: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
else
- cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
else
- ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
-else
- GCC=
-fi
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:971: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_prog_cc_g=yes
else
- ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_cv_prog_cc_g=no
fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
+ CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
@@ -997,298 +2332,809 @@
CFLAGS=
fi
fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+#include
+#include
+#include
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-CFLAGS="$CFLAGS -Wall"
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1005: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ ''\
+ '#include ' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
:
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+done
rm -f conftest*
- ac_cv_prog_CPP="$CPP"
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
fi
- CPP="$ac_cv_prog_CPP"
+
else
- ac_cv_prog_CPP="$CPP"
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+ @echo done
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
fi
-echo "$ac_t""$CPP" 1>&6
-# If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:1089: checking for X" >&5
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
fi
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
+
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CC" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ echo '#include "conftest.h"' > conftest.c
+ echo 'int i;' > conftest.h
+ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ ;;
+ none) break ;;
esac
- fi
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=conftest.c object=conftest.o \
+ depfile=conftest.Po tmpdepfile=conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep conftest.h conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored.
+ if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
cd ..
- rm -fr conftestdir
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
fi
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+CFLAGS="$CFLAGS -Wall"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for X" >&5
+echo $ECHO_N "checking for X... $ECHO_C" >&6
+
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+
+fi;
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+ if test "${ac_cv_have_x+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=no ac_x_libraries=no
+rm -fr conftest.dir
+if mkdir conftest.dir; then
+ cd conftest.dir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat >Imakefile <<'_ACEOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+_ACEOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case $ac_im_incroot in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
+ esac
+ case $ac_im_usrlibdir in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftest.dir
+fi
+
+# Standard set of common directories for X headers.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ac_x_header_dirs='
+/usr/X11/include
+/usr/X11R6/include
+/usr/X11R5/include
+/usr/X11R4/include
+
+/usr/include/X11
+/usr/include/X11R6
+/usr/include/X11R5
+/usr/include/X11R4
+
+/usr/local/X11/include
+/usr/local/X11R6/include
+/usr/local/X11R5/include
+/usr/local/X11R4/include
+
+/usr/local/include/X11
+/usr/local/include/X11R6
+/usr/local/include/X11R5
+/usr/local/include/X11R4
+
+/usr/X386/include
+/usr/x386/include
+/usr/XFree86/include/X11
+
+/usr/include
+/usr/local/include
+/usr/unsupported/include
+/usr/athena/include
+/usr/local/x11r5/include
+/usr/lpp/Xamples/include
+
+/usr/openwin/include
+/usr/openwin/share/include'
+
+if test "$ac_x_includes" = no; then
+ # Guess where to find include files, by looking for Intrinsic.h.
# First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
# We can compile using X headers with no special include directory.
ac_x_includes=
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ for ac_dir in $ac_x_header_dirs; do
+ if test -r "$ac_dir/X11/Intrinsic.h"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+done
fi
-rm -f conftest*
-fi # $ac_x_includes = NO
+rm -f conftest.err conftest.$ac_ext
+fi # $ac_x_includes = no
-if test "$ac_x_libraries" = NO; then
+if test "$ac_x_libraries" = no; then
# Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
# See if we find them without any special options.
# Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
+ ac_save_LIBS=$LIBS
+ LIBS="-lXt $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+int
+main ()
+{
+XtMalloc (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ LIBS=$ac_save_LIBS
# We can link X programs with no special library path.
ac_x_libraries=
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+LIBS=$ac_save_LIBS
+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
+ # Don't even attempt the hair of trying to link an X program!
for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ if test -r $ac_dir/libXt.$ac_extension; then
ac_x_libraries=$ac_dir
break 2
fi
done
done
fi
-rm -f conftest*
-fi # $ac_x_libraries = NO
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi # $ac_x_libraries = no
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
# Didn't find X anywhere. Cache the known absence of X.
ac_cv_have_x="have_x=no"
else
@@ -1297,12 +3143,14 @@
ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
fi
fi
+
fi
eval "$ac_cv_have_x"
fi # $with_x != no
if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
+ echo "$as_me:$LINENO: result: $have_x" >&5
+echo "${ECHO_T}$have_x" >&6
no_x=yes
else
# If each of the values was on the command line, it overrides each guess.
@@ -1311,14 +3159,16 @@
# Update the cache value to reflect the command line values.
ac_cv_have_x="have_x=yes \
ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
+echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
fi
if test "$no_x" = yes; then
# Not all programs may use this symbol, but it does not hurt to define it.
- cat >> confdefs.h <<\EOF
+
+cat >>confdefs.h <<\_ACEOF
#define X_DISPLAY_MISSING 1
-EOF
+_ACEOF
X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
else
@@ -1331,60 +3181,99 @@
X_LIBS="$X_LIBS -L$x_libraries"
# For Solaris; some versions of Sun CC require a space after -R and
# others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
+ case `(uname -sr) 2>/dev/null` in
"SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:1338: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
+ echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
+echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6
+ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_R_nospace=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_nospace=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_R_nospace=no
fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
X_LIBS="$X_LIBS -R$x_libraries"
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_R_space=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_space=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_R_space=no
fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
X_LIBS="$X_LIBS -R $x_libraries"
else
- echo "$ac_t""neither works" 1>&6
+ echo "$as_me:$LINENO: result: neither works" >&5
+echo "${ECHO_T}neither works" >&6
fi
fi
- LIBS="$ac_xsave_LIBS"
+ LIBS=$ac_xsave_LIBS
esac
fi
@@ -1395,572 +3284,943 @@
if test "$ISC" = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
else
- # address@hidden says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And address@hidden says
+ # Martyn Johnson says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And Karl Berry says
# the Alpha needs dnet_stub (dnet does not exist).
- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:1403: checking for dnet_ntoa in -ldnet" >&5
-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
+ builtin and then its argument prototype would still apply. */
+char XOpenDisplay ();
+int
+main ()
+{
+XOpenDisplay ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:1422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
+if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldnet $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa ();
+int
+main ()
+{
+dnet_ntoa ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dnet_dnet_ntoa=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dnet_dnet_ntoa=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
+if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-else
- echo "$ac_t""no" 1>&6
fi
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:1444: checking for dnet_ntoa in -ldnet_stub" >&5
-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
+if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet_stub $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:1463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa ();
+int
+main ()
+{
+dnet_ntoa ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dnet_stub_dnet_ntoa=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dnet_stub_dnet_ntoa=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
+if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-else
- echo "$ac_t""no" 1>&6
fi
fi
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_xsave_LIBS"
# address@hidden says -lnsl (and -lsocket) are needed for his 386/AT,
# to get the SysV transport functions.
- # address@hidden says the Pyramis MIS-ES running DC/OSx (SVR4)
+ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
# needs -lnsl.
# The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to address@hidden
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:1492: checking for gethostbyname" >&5
-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
+if test "${ac_cv_func_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include
+ which can conflict with char gethostbyname (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
#else
-gethostbyname();
+char (*f) () = gethostbyname;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:1520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
-fi
-rm -f conftest*
-fi
+int
+main ()
+{
+return f != gethostbyname;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+ac_cv_func_gethostbyname=no
fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
if test $ac_cv_func_gethostbyname = no; then
- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:1541: checking for gethostbyname in -lnsl" >&5
-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lnsl $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-gethostbyname()
-; return 0; }
-EOF
-if { (eval echo configure:1560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main ()
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_nsl_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_nsl_gethostbyname=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
+if test $ac_cv_lib_nsl_gethostbyname = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-else
- echo "$ac_t""no" 1>&6
+ if test $ac_cv_lib_nsl_gethostbyname = no; then
+ echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbsd $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main ()
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_bsd_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_bsd_gethostbyname=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
+if test $ac_cv_lib_bsd_gethostbyname = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
fi
+ fi
fi
# address@hidden says without -lsocket,
# socket/setsockopt and other routines are undefined under SCO ODT
# 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says address@hidden: it contains
- # gethostby* variants that don't use the nameserver (or something).
- # -lsocket must be given before -lnsl if both are needed.
- # We assume that if connect needs -lnsl, so does gethostbyname.
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:1590: checking for connect" >&5
-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for connect... $ECHO_C" >&6
+if test "${ac_cv_func_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include
+ which can conflict with char connect (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-
+ builtin and then its argument prototype would still apply. */
+char connect ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
-connect();
+char (*f) () = connect;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:1618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
-fi
-rm -f conftest*
-fi
+int
+main ()
+{
+return f != connect;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+ac_cv_func_connect=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
+echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
+echo "${ECHO_T}$ac_cv_func_connect" >&6
if test $ac_cv_func_connect = no; then
- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:1639: checking for connect in -lsocket" >&5
-ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
+if test "${ac_cv_lib_socket_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-connect()
-; return 0; }
-EOF
-if { (eval echo configure:1658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char connect ();
+int
+main ()
+{
+connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_socket_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_socket_connect=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
+if test $ac_cv_lib_socket_connect = yes; then
X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-else
- echo "$ac_t""no" 1>&6
fi
fi
- # address@hidden says -lposix is necessary on A/UX.
- echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:1682: checking for remove" >&5
-if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for remove... $ECHO_C" >&6
+if test "${ac_cv_func_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove(); below. */
-#include
+ which can conflict with char remove (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-
+ builtin and then its argument prototype would still apply. */
+char remove ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
-remove();
+char (*f) () = remove;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:1710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_remove=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_remove=no"
-fi
-rm -f conftest*
-fi
+int
+main ()
+{
+return f != remove;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+ac_cv_func_remove=no
fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
+echo "${ECHO_T}$ac_cv_func_remove" >&6
if test $ac_cv_func_remove = no; then
- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:1731: checking for remove in -lposix" >&5
-ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:$LINENO: checking for remove in -lposix" >&5
+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
+if test "${ac_cv_lib_posix_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lposix $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-remove()
-; return 0; }
-EOF
-if { (eval echo configure:1750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char remove ();
+int
+main ()
+{
+remove ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_posix_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_posix_remove=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
+if test $ac_cv_lib_posix_remove = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-else
- echo "$ac_t""no" 1>&6
fi
fi
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:1774: checking for shmat" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for shmat... $ECHO_C" >&6
+if test "${ac_cv_func_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat(); below. */
-#include
+ which can conflict with char shmat (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-
+ builtin and then its argument prototype would still apply. */
+char shmat ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
-shmat();
+char (*f) () = shmat;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:1802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_shmat=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_shmat=no"
-fi
-rm -f conftest*
-fi
+int
+main ()
+{
+return f != shmat;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+ac_cv_func_shmat=no
fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
+echo "${ECHO_T}$ac_cv_func_shmat" >&6
if test $ac_cv_func_shmat = no; then
- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:1823: checking for shmat in -lipc" >&5
-ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
+if test "${ac_cv_lib_ipc_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lipc $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-shmat()
-; return 0; }
-EOF
-if { (eval echo configure:1842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char shmat ();
+int
+main ()
+{
+shmat ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_ipc_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_ipc_shmat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
+if test $ac_cv_lib_ipc_shmat = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-else
- echo "$ac_t""no" 1>&6
fi
fi
fi
# Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
+ ac_save_LDFLAGS=$LDFLAGS
test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
# check for ICE first), but we must link in the order -lSM -lICE or
# we get undefined symbols. So assume we have SM if we have ICE.
# These have to be linked with before -lX11, unlike the other
# libraries we check for below, so use a different variable.
- # address@hidden, address@hidden
- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:1875: checking for IceConnectionNumber in -lICE" >&5
-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ # John Interrante, Karl Berry
+ echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char IceConnectionNumber();
-
-int main() {
-IceConnectionNumber()
-; return 0; }
-EOF
-if { (eval echo configure:1894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber ();
+int
+main ()
+{
+IceConnectionNumber ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_ICE_IceConnectionNumber=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_ICE_IceConnectionNumber=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
+if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-else
- echo "$ac_t""no" 1>&6
fi
- LDFLAGS="$ac_save_LDFLAGS"
+ LDFLAGS=$ac_save_LDFLAGS
fi
if test x"$no_x" != x; then
- { echo "configure: error: XBubble requires the X Window System !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: XBubble requires the X Window System !" >&5
+echo "$as_me: error: XBubble requires the X Window System !" >&2;}
+ { (exit 1); exit 1; }; }
else
CPPFLAGS="$CPPFLAGS $X_CFLAGS"
LIBS="$LIBS $X_PRE_LIBS $X_LIBS $X_EXTRA_LIBS"
fi
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1926: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
#include
#include
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_stdc=yes
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-EOF
+
+_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
+ $EGREP "memchr" >/dev/null 2>&1; then
:
else
- rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
@@ -1969,16 +4229,20 @@
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-EOF
+
+_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
+ $EGREP "free" >/dev/null 2>&1; then
:
else
- rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
@@ -1987,611 +4251,3816 @@
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
+ if test "$cross_compiling" = yes; then
:
else
- cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
-EOF
-if { (eval echo configure:2006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
:
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
fi
-rm -fr conftest*
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
fi
fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
+
+cat >>confdefs.h <<\_ACEOF
#define STDC_HEADERS 1
-EOF
+_ACEOF
fi
-ac_safe=`echo "unistd.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for unistd.h""... $ac_c" 1>&6
-echo "configure:2031: checking for unistd.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+if test "${ac_cv_header_unistd_h+set}" = set; then
+ echo "$as_me:$LINENO: checking for unistd.h" >&5
+echo $ECHO_N "checking for unistd.h... $ECHO_C" >&6
+if test "${ac_cv_header_unistd_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_unistd_h" >&5
+echo "${ECHO_T}$ac_cv_header_unistd_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking unistd.h usability" >&5
+echo $ECHO_N "checking unistd.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking unistd.h presence" >&5
+echo $ECHO_N "checking unistd.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2041: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: unistd.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: unistd.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: unistd.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: unistd.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: unistd.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: unistd.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: unistd.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: unistd.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: unistd.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: unistd.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for unistd.h" >&5
+echo $ECHO_N "checking for unistd.h... $ECHO_C" >&6
+if test "${ac_cv_header_unistd_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_unistd_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_unistd_h" >&5
+echo "${ECHO_T}$ac_cv_header_unistd_h" >&6
+
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+if test $ac_cv_header_unistd_h = yes; then
:
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: can't find unistd.h !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: can't find unistd.h !" >&5
+echo "$as_me: error: can't find unistd.h !" >&2;}
+ { (exit 1); exit 1; }; }
fi
-ac_safe=`echo "limits.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for limits.h""... $ac_c" 1>&6
-echo "configure:2065: checking for limits.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for limits.h... $ECHO_C" >&6
+if test "${ac_cv_header_limits_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5
+echo "${ECHO_T}$ac_cv_header_limits_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking limits.h usability" >&5
+echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking limits.h presence" >&5
+echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for limits.h" >&5
+echo $ECHO_N "checking for limits.h... $ECHO_C" >&6
+if test "${ac_cv_header_limits_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_limits_h=$ac_header_preproc
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5
+echo "${ECHO_T}$ac_cv_header_limits_h" >&6
+
+fi
+if test $ac_cv_header_limits_h = yes; then
:
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: can't find limits.h !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: can't find limits.h !" >&5
+echo "$as_me: error: can't find limits.h !" >&2;}
+ { (exit 1); exit 1; }; }
fi
-ac_safe=`echo "signal.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for signal.h""... $ac_c" 1>&6
-echo "configure:2099: checking for signal.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for signal.h... $ECHO_C" >&6
+if test "${ac_cv_header_signal_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_signal_h" >&5
+echo "${ECHO_T}$ac_cv_header_signal_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking signal.h usability" >&5
+echo $ECHO_N "checking signal.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking signal.h presence" >&5
+echo $ECHO_N "checking signal.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2109: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: signal.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: signal.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: signal.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: signal.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: signal.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: signal.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: signal.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: signal.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: signal.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: signal.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for signal.h" >&5
+echo $ECHO_N "checking for signal.h... $ECHO_C" >&6
+if test "${ac_cv_header_signal_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_signal_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_signal_h" >&5
+echo "${ECHO_T}$ac_cv_header_signal_h" >&6
+
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+if test $ac_cv_header_signal_h = yes; then
:
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: can't find signal.h !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: can't find signal.h !" >&5
+echo "$as_me: error: can't find signal.h !" >&2;}
+ { (exit 1); exit 1; }; }
fi
-ac_safe=`echo "sys/time.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/time.h""... $ac_c" 1>&6
-echo "configure:2133: checking for sys/time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for sys/time.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_time_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_time_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_time_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking sys/time.h usability" >&5
+echo $ECHO_N "checking sys/time.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking sys/time.h presence" >&5
+echo $ECHO_N "checking sys/time.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: sys/time.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: sys/time.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/time.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: sys/time.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: sys/time.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: sys/time.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/time.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: sys/time.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: sys/time.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: sys/time.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for sys/time.h" >&5
+echo $ECHO_N "checking for sys/time.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_time_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_sys_time_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_time_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_time_h" >&6
+
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+if test $ac_cv_header_sys_time_h = yes; then
:
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: can't find sys/time.h !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: can't find sys/time.h !" >&5
+echo "$as_me: error: can't find sys/time.h !" >&2;}
+ { (exit 1); exit 1; }; }
fi
-ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:2167: checking for png.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking for png.h... $ECHO_C" >&6
+if test "${ac_cv_header_png_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_png_h" >&5
+echo "${ECHO_T}$ac_cv_header_png_h" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking png.h usability" >&5
+echo $ECHO_N "checking png.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking png.h presence" >&5
+echo $ECHO_N "checking png.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+ yes:no )
+ { echo "$as_me:$LINENO: WARNING: png.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: png.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: png.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: png.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+ no:yes )
+ { echo "$as_me:$LINENO: WARNING: png.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: png.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: png.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: png.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: png.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: png.h: proceeding with the preprocessor's result" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to address@hidden ##
+## ------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for png.h" >&5
+echo $ECHO_N "checking for png.h... $ECHO_C" >&6
+if test "${ac_cv_header_png_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_png_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_png_h" >&5
+echo "${ECHO_T}$ac_cv_header_png_h" >&6
+
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+if test $ac_cv_header_png_h = yes; then
:
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: can't find libpng header png.h !" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: can't find libpng header png.h !" >&5
+echo "$as_me: error: can't find libpng header png.h !" >&2;}
+ { (exit 1); exit 1; }; }
fi
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2200: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include
#include
#include
-int main() {
-struct tm *tp;
-; return 0; }
-EOF
-if { (eval echo configure:2214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_time=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_time=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_time=no
fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
fi
-
-echo "$ac_t""$ac_cv_header_time" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6
if test $ac_cv_header_time = yes; then
- cat >> confdefs.h <<\EOF
+
+cat >>confdefs.h <<\_ACEOF
#define TIME_WITH_SYS_TIME 1
-EOF
+_ACEOF
fi
-echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
-echo "configure:2236: checking for XOpenDisplay in -lX11" >&5
-ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5
+echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6
+if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lX11 $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XOpenDisplay();
-
-int main() {
-XOpenDisplay()
-; return 0; }
-EOF
-if { (eval echo configure:2255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo X11 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_X11_XOpenDisplay=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_X11_XOpenDisplay=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5
+echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6
+if test $ac_cv_lib_X11_XOpenDisplay = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBX11 1
+_ACEOF
LIBS="-lX11 $LIBS"
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: libX11 not found." 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: libX11 not found." >&5
+echo "$as_me: error: libX11 not found." >&2;}
+ { (exit 1); exit 1; }; }
fi
-echo $ac_n "checking for png_read_info in -lpng""... $ac_c" 1>&6
-echo "configure:2284: checking for png_read_info in -lpng" >&5
-ac_lib_var=`echo png'_'png_read_info | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for png_read_info in -lpng" >&5
+echo $ECHO_N "checking for png_read_info in -lpng... $ECHO_C" >&6
+if test "${ac_cv_lib_png_png_read_info+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
+ ac_check_lib_save_LIBS=$LIBS
LIBS="-lpng -lz -lm $LIBS"
-cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char png_read_info();
-
-int main() {
-png_read_info()
-; return 0; }
-EOF
-if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
+ builtin and then its argument prototype would still apply. */
+char png_read_info ();
+int
+main ()
+{
+png_read_info ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_png_png_read_info=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_png_png_read_info=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_png_png_read_info" >&5
+echo "${ECHO_T}$ac_cv_lib_png_png_read_info" >&6
+if test $ac_cv_lib_png_png_read_info = yes; then
LIBS="$LIBS -lpng -lz -lm"
else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: the PNG library can't be found." 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: the PNG library can't be found." >&5
+echo "$as_me: error: the PNG library can't be found." >&2;}
+ { (exit 1); exit 1; }; }
fi
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
+
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+
+
+
+
+
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
*)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGFMT" >&5
+echo "${ECHO_T}$MSGFMT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_GMSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
fi
-rm -f confcache
+GMSGFMT=$ac_cv_path_GMSGFMT
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+if test -n "$GMSGFMT"; then
+ echo "$as_me:$LINENO: result: $GMSGFMT" >&5
+echo "${ECHO_T}$GMSGFMT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_XGETTEXT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ echo "$as_me:$LINENO: result: $XGETTEXT" >&5
+echo "${ECHO_T}$XGETTEXT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ rm -f messages.po
+
+ # Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGMERGE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$MSGMERGE" in
+ /*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGMERGE" >&5
+echo "${ECHO_T}$MSGMERGE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+ if test "$GMSGFMT" != ":"; then
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5
+echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6
+ GMSGFMT=":"
+ fi
+ fi
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5
+echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6
+ XGETTEXT=":"
+ fi
+ rm -f messages.po
+ fi
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
+ ac_config_commands="$ac_config_commands default-1"
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS </dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
-done
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${acl_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${acl_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 &5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6
+with_gnu_ld=$acl_cv_prog_gnu_ld
-trap 'rm -fr `echo "Makefile src/Makefile graphics/Makefile man/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
address@hidden@%$SHELL%g
address@hidden@%$CFLAGS%g
address@hidden@%$CPPFLAGS%g
address@hidden@%$CXXFLAGS%g
address@hidden@%$FFLAGS%g
address@hidden@%$DEFS%g
address@hidden@%$LDFLAGS%g
address@hidden@%$LIBS%g
address@hidden@%$exec_prefix%g
address@hidden@%$prefix%g
address@hidden@%$program_transform_name%g
address@hidden@%$bindir%g
address@hidden@%$sbindir%g
address@hidden@%$libexecdir%g
address@hidden@%$datadir%g
address@hidden@%$sysconfdir%g
address@hidden@%$sharedstatedir%g
address@hidden@%$localstatedir%g
address@hidden@%$libdir%g
address@hidden@%$includedir%g
address@hidden@%$oldincludedir%g
address@hidden@%$infodir%g
address@hidden@%$mandir%g
address@hidden@%$INSTALL_PROGRAM%g
address@hidden@%$INSTALL_SCRIPT%g
address@hidden@%$INSTALL_DATA%g
address@hidden@%$PACKAGE%g
address@hidden@%$VERSION%g
address@hidden@%$ACLOCAL%g
address@hidden@%$AUTOCONF%g
address@hidden@%$AUTOMAKE%g
address@hidden@%$AUTOHEADER%g
address@hidden@%$MAKEINFO%g
address@hidden@%$SET_MAKE%g
address@hidden@%$CC%g
address@hidden@%$CPP%g
address@hidden@%$X_CFLAGS%g
address@hidden@%$X_PRE_LIBS%g
address@hidden@%$X_LIBS%g
address@hidden@%$X_EXTRA_LIBS%g
-CEOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
+ echo "$as_me:$LINENO: checking for shared library run path origin" >&5
+echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6
+if test "${acl_cv_rpath+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
fi
-EOF
+echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5
+echo "${ECHO_T}$acl_cv_rpath" >&6
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec"
+ # Check whether --enable-rpath or --disable-rpath was given.
+if test "${enable_rpath+set}" = set; then
+ enableval="$enable_rpath"
+ :
+else
+ enable_rpath=yes
+fi;
-cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
- *) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
- esac
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
address@hidden@%$configure_input%g
address@hidden@%$srcdir%g
address@hidden@%$top_srcdir%g
address@hidden@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
+ use_additional=yes
-EOF
-cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then
+ withval="$with_libiconv_prefix"
+
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi;
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi;
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
+
+
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5
+echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libc=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libc" >&6
+
+ if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ echo "$as_me:$LINENO: checking for iconv" >&5
+echo $ECHO_N "checking for iconv... $ECHO_C" >&6
+if test "${am_cv_func_iconv+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+#include
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+#include
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5
+echo "${ECHO_T}$am_cv_func_iconv" >&6
+ if test "$am_cv_func_iconv" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ICONV 1
+_ACEOF
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ echo "$as_me:$LINENO: checking how to link with libiconv" >&5
+echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBICONV" >&5
+echo "${ECHO_T}$LIBICONV" >&6
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix or --without-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then
+ withval="$with_libintl_prefix"
+
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi;
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5
+echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libintl=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libintl=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext1_libintl=yes
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libintl" >&6
+ fi
+
+ if test "$gt_cv_func_gnugettext1_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \
+ && test "$PACKAGE" != gettext; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_NLS 1
+_ACEOF
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ echo "$as_me:$LINENO: checking how to link with libintl" >&5
+echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBINTL" >&5
+echo "${ECHO_T}$LIBINTL" >&6
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETTEXT 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DCGETTEXT 1
+_ACEOF
+
+ fi
+
+ POSUB=po
+ fi
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LOCALEDIR "/usr/share/locale"
+_ACEOF
+
+
+ ac_config_files="$ac_config_files Makefile src/Makefile graphics/Makefile man/Makefile po/Makefile.in m4/Makefile"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:address@hidden@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.57. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to ."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.57,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "graphics/Makefile" ) CONFIG_FILES="$CONFIG_FILES graphics/Makefile" ;;
+ "man/Makefile" ) CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+ "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CPP@,$CPP,;t t
+s,@X_CFLAGS@,$X_CFLAGS,;t t
+s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t
+s,@X_LIBS@,$X_LIBS,;t t
+s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
+s,@EGREP@,$EGREP,;t t
+s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t
+s,@MSGFMT@,$MSGFMT,;t t
+s,@GMSGFMT@,$GMSGFMT,;t t
+s,@XGETTEXT@,$XGETTEXT,;t t
+s,@MSGMERGE@,$MSGMERGE,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@USE_NLS@,$USE_NLS,;t t
+s,@LIBICONV@,$LIBICONV,;t t
+s,@LTLIBICONV@,$LTLIBICONV,;t t
+s,@INTLLIBS@,$INTLLIBS,;t t
+s,@LIBINTL@,$LIBINTL,;t t
+s,@LTLIBINTL@,$LTLIBINTL,;t t
+s,@POSUB@,$POSUB,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo $f;;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo $f
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo $srcdir/$f
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ default-1 )
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ fi
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ GMOFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
diff -ruN -x autom4te.cache xbubble-0.2/configure.in xbubble-0.2.i18n/configure.in
--- xbubble-0.2/configure.in 2002-08-22 14:41:16.000000000 +0200
+++ xbubble-0.2.i18n/configure.in 2003-04-09 11:39:29.000000000 +0200
@@ -29,4 +29,9 @@
AC_CHECK_LIB(png, png_read_info, LIBS="$LIBS -lpng -lz -lm",
AC_MSG_ERROR([the PNG library can't be found.]), -lz -lm )
-AC_OUTPUT(Makefile src/Makefile graphics/Makefile man/Makefile)
+dnl Check NLS
+AM_GNU_GETTEXT([external])
+AC_DEFINE_UNQUOTED(LOCALEDIR,"/usr/share/locale")
+
+AC_OUTPUT(Makefile src/Makefile graphics/Makefile man/Makefile \
+ po/Makefile.in m4/Makefile)
diff -ruN -x autom4te.cache xbubble-0.2/depcomp xbubble-0.2.i18n/depcomp
--- xbubble-0.2/depcomp 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/depcomp 2003-02-21 00:31:32.000000000 +0100
@@ -0,0 +1,464 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva .
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+ dir=`echo "$object" | sed 's,/.*$,/,'`
+ if test "$dir" = "$object"; then
+ dir=
+ fi
+ # FIXME: should be _deps on DOS.
+ depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. This file always lives in the current directory.
+ # Also, the AIX compiler puts `$object:' at the start of each line;
+ # $object doesn't have directory information.
+ stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ outname="$stripped.o"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Must come before tru64.
+
+ # Intel's C compiler understands `-MD -MF file'. However
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile1"; then
+ tmpdepfile="$tmpdepfile1"
+ else
+ tmpdepfile="$tmpdepfile2"
+ fi
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a space and a tab in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the proprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
diff -ruN -x autom4te.cache xbubble-0.2/graphics/Makefile.in xbubble-0.2.i18n/graphics/Makefile.in
--- xbubble-0.2/graphics/Makefile.in 2002-08-22 15:31:20.000000000 +0200
+++ xbubble-0.2.i18n/graphics/Makefile.in 2003-04-09 12:25:57.000000000 +0200
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.3 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -10,67 +12,147 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# XBubble graphics
-
address@hidden@
-SHELL = @SHELL@
+# XBubble graphics
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
colors = black blue brown green magenta red white yellow
frames = 02 03 04 05 06 07 08 09
-animations = $(foreach color, $(colors), $(color).png $(color).txt $(foreach frame, $(frames), $(color)$(frame).png ))
+animations = $(foreach color, $(colors), $(color).png $(color).txt \
+ $(foreach frame, $(frames), $(color)$(frame).png ))
-images = canon.png frame_light.txt frame_light_off.png frame_light_on.png countdown.png tee.png bar.png side.png bottom.png blue_bg.png xbubble_bg.png cup_off.png cup_on.png dead.png
+images = \
+ canon.png \
+ frame_light.txt \
+ frame_light_off.png \
+ frame_light_on.png \
+ countdown.png \
+ tee.png \
+ bar.png \
+ side.png \
+ bottom.png \
+ blue_bg.png \
+ xbubble_bg.png \
+ cup_off.png \
+ cup_on.png \
+ dead.png
fonts = baskvli.pfb fonts.dir
@@ -80,129 +162,165 @@
pkgdata_DATA = $(animations) $(images) $(fonts)
EXTRA_DIST = $(pkgdata_DATA) $(povray_src) $(gimp_src)
+subdir = graphics
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DATA = $(pkgdata_DATA)
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(pkgdata_DATA)
-DIST_COMMON = Makefile.am Makefile.in
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps graphics/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu graphics/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+pkgdataDATA_INSTALL = $(INSTALL_DATA)
install-pkgdataDATA: $(pkgdata_DATA)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
@list='$(pkgdata_DATA)'; for p in $$list; do \
- if test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdatadir)/$$p"; \
- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdatadir)/$$p; \
- else if test -f $$p; then \
- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p"; \
- $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p; \
- fi; fi; \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f"; \
+ $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f; \
done
uninstall-pkgdataDATA:
@$(NORMAL_UNINSTALL)
- list='$(pkgdata_DATA)'; for p in $$list; do \
- rm -f $(DESTDIR)$(pkgdatadir)/$$p; \
+ @list='$(pkgdata_DATA)'; for p in $$list; do \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " rm -f $(DESTDIR)$(pkgdatadir)/$$f"; \
+ rm -f $(DESTDIR)$(pkgdatadir)/$$f; \
done
tags: TAGS
TAGS:
+ctags: CTAGS
+CTAGS:
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-subdir = graphics
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(DATA)
-install-data-am: install-pkgdataDATA
-install-data: install-data-am
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
-uninstall-am: uninstall-pkgdataDATA
+install-exec: install-exec-am
+install-data: install-data-am
uninstall: uninstall-am
-all-am: Makefile $(DATA)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-generic
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-generic mostlyclean-am
+distclean: distclean-am
-clean: clean-am
+distclean-am: clean-am distclean-generic
-distclean-am: distclean-generic clean-am
+dvi: dvi-am
-distclean: distclean-am
+dvi-am:
-maintainer-clean-am: maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info: info-am
+
+info-am:
+
+install-data-am: install-pkgdataDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
-.PHONY: uninstall-pkgdataDATA install-pkgdataDATA tags distdir info-am \
-info dvi-am dvi check check-am installcheck-am installcheck \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-pkgdataDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am info info-am install \
+ install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-pkgdataDATA install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am uninstall-info-am uninstall-pkgdataDATA
$(animations): $(povray_src) $(gimp_src)
./render_bubbles.sh
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff -ruN -x autom4te.cache xbubble-0.2/m4/ChangeLog xbubble-0.2.i18n/m4/ChangeLog
--- xbubble-0.2/m4/ChangeLog 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/ChangeLog 2003-04-09 10:05:10.000000000 +0200
@@ -0,0 +1,21 @@
+2003-04-09 gettextize
+
+ * codeset.m4: New file, from gettext-0.11.5.
+ * gettext.m4: New file, from gettext-0.11.5.
+ * glibc21.m4: New file, from gettext-0.11.5.
+ * iconv.m4: New file, from gettext-0.11.5.
+ * intdiv0.m4: New file, from gettext-0.11.5.
+ * inttypes.m4: New file, from gettext-0.11.5.
+ * inttypes_h.m4: New file, from gettext-0.11.5.
+ * inttypes-pri.m4: New file, from gettext-0.11.5.
+ * isc-posix.m4: New file, from gettext-0.11.5.
+ * lcmessage.m4: New file, from gettext-0.11.5.
+ * lib-ld.m4: New file, from gettext-0.11.5.
+ * lib-link.m4: New file, from gettext-0.11.5.
+ * lib-prefix.m4: New file, from gettext-0.11.5.
+ * progtest.m4: New file, from gettext-0.11.5.
+ * stdint_h.m4: New file, from gettext-0.11.5.
+ * uintmax_t.m4: New file, from gettext-0.11.5.
+ * ulonglong.m4: New file, from gettext-0.11.5.
+ * Makefile.am: New file.
+
diff -ruN -x autom4te.cache xbubble-0.2/m4/codeset.m4 xbubble-0.2.i18n/m4/codeset.m4
--- xbubble-0.2/m4/codeset.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/codeset.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,23 @@
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include ],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have and nl_langinfo(CODESET).])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/gettext.m4 xbubble-0.2.i18n/m4/gettext.m4
--- xbubble-0.2/m4/gettext.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/gettext.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,587 @@
+# gettext.m4 serial 17 (gettext-0.11.5)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper , 1995-2000.
+dnl Bruno Haible , 2000-2002.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define(gt_included_intl, ifelse([$1], [external], [no], [yes]))
+ define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], []))
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ dnl Add a version number to the cache macros.
+ define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
+ define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
+ define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
+
+ AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ dnl Now see whether libintl exists and depends on libiconv.
+ if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext_libintl=yes
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+ && test "$PACKAGE" != gettext; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(INTLOBJS)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl Checks for all prerequisites of the po subdirectory,
+dnl except for USE_NLS.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Search for GNU xgettext 0.11 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ AC_MSG_RESULT(
+ [found $GMSGFMT program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+ fi
+
+ AC_OUTPUT_COMMANDS([
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ fi
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ GMOFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([jm_GLIBC21])dnl
+ AC_REQUIRE([gt_INTDIV0])dnl
+ AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
+ AC_REQUIRE([gt_INTTYPES_PRI])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
+
+ AM_ICONV
+ AM_LANGINFO_CODESET
+ if test $ac_cv_header_locale_h = yes; then
+ AM_LC_MESSAGES
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+])
+
+
+AC_DEFUN([AM_MKINSTALLDIRS],
+[
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+ dnl Try to locate is.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff -ruN -x autom4te.cache xbubble-0.2/m4/glibc21.m4 xbubble-0.2.i18n/m4/glibc21.m4
--- xbubble-0.2/m4/glibc21.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/glibc21.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,32 @@
+# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([jm_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
diff -ruN -x autom4te.cache xbubble-0.2/m4/iconv.m4 xbubble-0.2.i18n/m4/iconv.m4
--- xbubble-0.2/m4/iconv.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/iconv.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,103 @@
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include
+#include ],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include
+#include ],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include
+#include
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/intdiv0.m4 xbubble-0.2.i18n/m4/intdiv0.m4
--- xbubble-0.2/m4/intdiv0.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/intdiv0.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,72 @@
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+ gt_cv_int_divbyzero_sigfpe,
+ [
+ AC_TRY_RUN([
+#include
+#include
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+ [
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i[34567]86 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
+ ])
+ ])
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+ [Define if integer division by zero raises signal SIGFPE.])
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/inttypes_h.m4 xbubble-0.2.i18n/m4/inttypes_h.m4
--- xbubble-0.2/m4/inttypes_h.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/inttypes_h.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,28 @@
+# inttypes_h.m4 serial 4 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists,
+# doesn't clash with , and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include
+#include ],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+[Define if exists, doesn't clash with ,
+ and declares uintmax_t. ])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/inttypes.m4 xbubble-0.2.i18n/m4/inttypes.m4
--- xbubble-0.2/m4/inttypes.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/inttypes.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,27 @@
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if exists and doesn't clash with
+# .
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include
+#include ],
+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+ ])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if exists and doesn't clash with .])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/inttypes-pri.m4 xbubble-0.2.i18n/m4/inttypes-pri.m4
--- xbubble-0.2/m4/inttypes-pri.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/inttypes-pri.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,32 @@
+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if exists and defines the PRI*
+# macros to non-string values. This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+ gt_cv_inttypes_pri_broken,
+ [
+ AC_TRY_COMPILE([#include
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+ ])
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+ [Define if exists and defines unusable PRI* macros.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/isc-posix.m4 xbubble-0.2.i18n/m4/isc-posix.m4
--- xbubble-0.2/m4/isc-posix.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/isc-posix.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,26 @@
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
diff -ruN -x autom4te.cache xbubble-0.2/m4/lcmessage.m4 xbubble-0.2.i18n/m4/lcmessage.m4
--- xbubble-0.2/m4/lcmessage.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/lcmessage.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,32 @@
+# lcmessage.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper , 1995.
+
+# Check whether LC_MESSAGES is available in .
+
+AC_DEFUN([AM_LC_MESSAGES],
+[
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include ], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your file defines LC_MESSAGES.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/lib-ld.m4 xbubble-0.2.i18n/m4/lib-ld.m4
--- xbubble-0.2/m4/lib-ld.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/lib-ld.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,97 @@
+# lib-ld.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 &5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/lib-link.m4 xbubble-0.2.i18n/m4/lib-link.m4
--- xbubble-0.2/m4/lib-link.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/lib-link.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,554 @@
+# lib-link.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L,
+dnl sys_lib_search_path_spec, sys_lib_dlsearch_path_spec.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/lib-prefix.m4 xbubble-0.2.i18n/m4/lib-prefix.m4
--- xbubble-0.2/m4/lib-prefix.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/lib-prefix.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,148 @@
+# lib-prefix.m4 serial 1 (gettext-0.11)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/Makefile.am xbubble-0.2.i18n/m4/Makefile.am
--- xbubble-0.2/m4/Makefile.am 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/Makefile.am 2003-04-09 10:05:10.000000000 +0200
@@ -0,0 +1 @@
+EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4
diff -ruN -x autom4te.cache xbubble-0.2/m4/Makefile.in xbubble-0.2.i18n/m4/Makefile.in
--- xbubble-0.2/m4/Makefile.in 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/Makefile.in 2003-04-09 12:25:59.000000000 +0200
@@ -0,0 +1,269 @@
+# Makefile.in generated by automake 1.7.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
address@hidden@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4
+subdir = m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = ChangeLog Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu m4/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am info info-am install \
+ install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -ruN -x autom4te.cache xbubble-0.2/m4/progtest.m4 xbubble-0.2.i18n/m4/progtest.m4
--- xbubble-0.2/m4/progtest.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/progtest.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,59 @@
+# progtest.m4 serial 2 (gettext-0.10.40)
+dnl Copyright (C) 1996-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper , 1996.
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/stdint_h.m4 xbubble-0.2.i18n/m4/stdint_h.m4
--- xbubble-0.2/m4/stdint_h.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/stdint_h.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,28 @@
+# stdint_h.m4 serial 2 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if exists,
+# doesn't clash with , and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include
+#include ],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_stdint_h=yes,
+ jm_ac_cv_header_stdint_h=no)])
+ if test $jm_ac_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+[Define if exists, doesn't clash with ,
+ and declares uintmax_t. ])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/uintmax_t.m4 xbubble-0.2.i18n/m4/uintmax_t.m4
--- xbubble-0.2/m4/uintmax_t.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/uintmax_t.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,29 @@
+# uintmax_t.m4 serial 6 (gettext-0.11)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to `unsigned long' or `unsigned long long'
+# if does not exist.
+
+AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if and don't define.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/m4/ulonglong.m4 xbubble-0.2.i18n/m4/ulonglong.m4
--- xbubble-0.2/m4/ulonglong.m4 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/m4/ulonglong.m4 2002-08-14 11:40:37.000000000 +0200
@@ -0,0 +1,23 @@
+# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40)
+dnl Copyright (C) 1999-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the unsigned long long type.])
+ fi
+])
diff -ruN -x autom4te.cache xbubble-0.2/Makefile.am xbubble-0.2.i18n/Makefile.am
--- xbubble-0.2/Makefile.am 2002-02-27 12:14:59.000000000 +0100
+++ xbubble-0.2.i18n/Makefile.am 2003-04-09 10:08:25.000000000 +0200
@@ -1 +1,5 @@
-SUBDIRS = src graphics man
+SUBDIRS = m4 po src graphics man
+
+ACLOCAL_AMFLAGS = -I m4
+
+EXTRA_DIST = config.rpath
diff -ruN -x autom4te.cache xbubble-0.2/Makefile.in xbubble-0.2.i18n/Makefile.in
--- xbubble-0.2/Makefile.in 2002-08-22 15:31:17.000000000 +0200
+++ xbubble-0.2.i18n/Makefile.in 2003-04-09 12:25:57.000000000 +0200
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.3 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -10,101 +12,172 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
address@hidden@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = .
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = m4 po src graphics man
-SUBDIRS = src graphics man
+ACLOCAL_AMFLAGS = -I m4
+
+EXTRA_DIST = config.rpath
+subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
-Makefile.in NEWS aclocal.m4 configure configure.in install-sh missing \
-mkinstalldirs
-
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \
+ Makefile.am Makefile.in NEWS TODO aclocal.m4 config.guess \
+ config.rpath config.sub configure configure.in depcomp \
+ install-sh missing mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS)
+all: all-recursive
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-$(ACLOCAL_M4): configure.in
- cd $(srcdir) && $(ACLOCAL)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): configure.in m4/codeset.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/intdiv0.m4 m4/inttypes-pri.m4 m4/inttypes.m4 m4/inttypes_h.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/progtest.m4 m4/stdint_h.m4 m4/uintmax_t.m4 m4/ulonglong.m4
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+uninstall-info-am:
+
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
-
address@hidden@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -124,13 +197,18 @@
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
+ rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
@@ -146,169 +224,288 @@
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
+ fi; \
done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+top_distdir = .
distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- -rm -rf $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- dc_install_base=`cd $(distdir)/=inst && pwd`; \
- cd $(distdir)/=build \
- && ../configure --srcdir=.. --prefix=$$dc_install_base \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) dist
- -rm -rf $(distdir)
- @banner="$(distdir).tar.gz is ready for distribution"; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"
-dist: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-dist-all: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
distdir: $(DISTFILES)
- -rm -rf $(distdir)
+ $(am__remove_distdir)
mkdir $(distdir)
- -chmod 777 $(distdir)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ $(mkinstalldirs) $(distdir)/po
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
- for subdir in $(SUBDIRS); do \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
|| exit 1; \
fi; \
done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ $(am__remove_distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+ && rm -f $(distdir).tar.gz \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+distuninstallcheck:
+ cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
check-am: all-am
check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-exec-am:
-install-exec: install-exec-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
-install-data-am:
+install: install-recursive
+install-exec: install-exec-recursive
install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile
-all-redirect: all-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-tags mostlyclean-generic
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
-mostlyclean: mostlyclean-recursive
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-tags clean-generic mostlyclean-am
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-generic distclean-tags
-clean: clean-recursive
+dvi: dvi-recursive
-distclean-am: distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-recursive
- -rm -f config.status
+info: info-recursive
-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
- distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-recursive
- -rm -f config.status
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+ps: ps-recursive
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-recursive ctags ctags-recursive dist \
+ dist-all dist-gzip distcheck distclean distclean-generic \
+ distclean-recursive distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am dvi-recursive info info-am \
+ info-recursive install install-am install-data install-data-am \
+ install-data-recursive install-exec install-exec-am \
+ install-exec-recursive install-info install-info-am \
+ install-info-recursive install-man install-recursive \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am installdirs-recursive maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+ mostlyclean-generic mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff -ruN -x autom4te.cache xbubble-0.2/man/Makefile.in xbubble-0.2.i18n/man/Makefile.in
--- xbubble-0.2/man/Makefile.in 2002-08-22 15:31:21.000000000 +0200
+++ xbubble-0.2.i18n/man/Makefile.in 2003-04-09 12:25:57.000000000 +0200
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.3 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -10,87 +12,149 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
address@hidden@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
VERSION = @VERSION@
-
+XGETTEXT = @XGETTEXT@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
man_MANS = xbubble.6
EXTRA_DIST = $(man_MANS)
+subdir = man
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-man6dir = $(mandir)/man6
-MANS = $(man_MANS)
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
NROFF = nroff
-DIST_COMMON = Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+MANS = $(man_MANS)
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps man/Makefile
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu man/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-install-man6:
+man6dir = $(mandir)/man6
+install-man6: $(man6_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(man6dir)
- @list='$(man6_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
+ @list='$(man6_MANS) $(dist_man6_MANS) $(nodist_man6_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
case "$$i" in \
*.6*) list="$$list $$i" ;; \
esac; \
@@ -99,112 +163,160 @@
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 6*) ;; \
+ *) ext='6' ;; \
+ esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man6dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man6dir)/$$inst; \
done
-
uninstall-man6:
- @list='$(man6_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
+ @$(NORMAL_UNINSTALL)
+ @list='$(man6_MANS) $(dist_man6_MANS) $(nodist_man6_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
case "$$i" in \
*.6*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 6*) ;; \
+ *) ext='6' ;; \
+ esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man6dir)/$$inst"; \
rm -f $(DESTDIR)$(man6dir)/$$inst; \
done
-install-man: $(MANS)
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-man6
-uninstall-man:
- @$(NORMAL_UNINSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-man6
tags: TAGS
TAGS:
+ctags: CTAGS
+CTAGS:
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-subdir = man
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(MANS)
-install-data-am: install-man
-install-data: install-data-am
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(man6dir)
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
-uninstall-am: uninstall-man
+install-exec: install-exec-am
+install-data: install-data-am
uninstall: uninstall-am
-all-am: Makefile $(MANS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(mandir)/man6
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-generic
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-generic mostlyclean-am
+distclean: distclean-am
-clean: clean-am
+distclean-am: clean-am distclean-generic
-distclean-am: distclean-generic clean-am
+dvi: dvi-am
-distclean: distclean-am
+dvi-am:
-maintainer-clean-am: maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man: install-man6
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
-.PHONY: install-man6 uninstall-man6 install-man uninstall-man tags \
-distdir info-am info dvi-am dvi check check-am installcheck-am \
-installcheck install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man6
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am info info-am install \
+ install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-man6 install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am uninstall-info-am uninstall-man uninstall-man6
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff -ruN -x autom4te.cache xbubble-0.2/po/boldquot.sed xbubble-0.2.i18n/po/boldquot.sed
--- xbubble-0.2/po/boldquot.sed 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/boldquot.sed 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/â\1â/g
+s/`\([^`']*\)'/â\1â/g
+s/ '\([^`']*\)' / â\1â /g
+s/ '\([^`']*\)'$/ â\1â/g
+s/^'\([^`']*\)' /â\1â /g
+s/ââ/""/g
+s/â/â[1m/g
+s/â/[0mâ/g
+s/â/â[1m/g
+s/â/[0mâ/g
diff -ruN -x autom4te.cache xbubble-0.2/po/ChangeLog xbubble-0.2.i18n/po/ChangeLog
--- xbubble-0.2/po/ChangeLog 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/ChangeLog 2003-04-09 10:05:10.000000000 +0200
@@ -0,0 +1,11 @@
+2003-04-09 gettextize
+
+ * Makefile.in.in: New file, from gettext-0.11.5.
+ * Rules-quot: New file, from gettext-0.11.5.
+ * boldquot.sed: New file, from gettext-0.11.5.
+ * address@hidden: New file, from gettext-0.11.5.
+ * address@hidden: New file, from gettext-0.11.5.
+ * insert-header.sin: New file, from gettext-0.11.5.
+ * quot.sed: New file, from gettext-0.11.5.
+ * remove-potcdate.sin: New file, from gettext-0.11.5.
+
diff -ruN -x autom4te.cache xbubble-0.2/po/address@hidden xbubble-0.2.i18n/po/address@hidden
--- xbubble-0.2/po/address@hidden 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/address@hidden 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff -ruN -x autom4te.cache xbubble-0.2/po/address@hidden xbubble-0.2.i18n/po/address@hidden
--- xbubble-0.2/po/address@hidden 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/address@hidden 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
Les fichiers binaires xbubble-0.2/po/fr.gmo et xbubble-0.2.i18n/po/fr.gmo sont différents.
diff -ruN -x autom4te.cache xbubble-0.2/po/fr.po xbubble-0.2.i18n/po/fr.po
--- xbubble-0.2/po/fr.po 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/fr.po 2003-04-09 14:50:47.000000000 +0200
@@ -0,0 +1,209 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR , YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xbubble 0.2\n"
+"POT-Creation-Date: 2003-04-09 12:26+0200\n"
+"PO-Revision-Date: 2003-04-09 14:50+0200\n"
+"Last-Translator: Martin Quinson \n"
+"Language-Team: French \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/init.c:104
+msgid "xbubble : can't open display.\n"
+msgstr "xbubble : Impossible d'ouvrir le display.\n"
+
+#: src/init.c:112
+msgid "Sorry, your display color depth is not supported.\n"
+msgstr "Désolé, le nombre de couleurs de votre affichage n'est pas géré.\n"
+
+#: src/init.c:170
+msgid "xbubble : couldn't load any font.\n"
+msgstr "xbubble : Impossible de charger la moindre police de caractères.\n"
+
+#: src/init.c:183 src/init.c:267
+#, c-format
+msgid "Error scaling %s. Aborting...\n"
+msgstr "Erreur lors de la mise à l'echelle de %s. Abandon...\n"
+
+#: src/init.c:188
+#, c-format
+msgid "Couldn't create pixmaps for image %s. Aborting...\n"
+msgstr ""
+"Impossible de créer les pixmaps correspondant à l'image %s. Abandon...\n"
+
+#: src/init.c:222
+#, c-format
+msgid "Couldn't open description file %s.\n"
+msgstr ""
+
+#: src/init.c:247
+#, c-format
+msgid "Error parsing line %d of file %s.\n"
+msgstr "Erreur de syntaxe à la ligne %d du fichier %s.\n"
+
+#: src/init.c:251
+#, c-format
+msgid "Animation %s has no valid frames.\n"
+msgstr ""
+
+#: src/init.c:271
+#, c-format
+msgid "Couldn't create pixmaps for image %s.\n"
+msgstr "Impossible de créer les pixmaps correspondant à l'image %s.\n"
+
+#: src/init.c:507
+msgid "XBubble"
+msgstr "XBubble"
+
+#: src/init.c:508
+msgid "Loading graphics ..."
+msgstr "Chargement des graphiques ..."
+
+#: src/game.c:79 src/screens.c:194 src/screens.c:225
+msgid "Player 1"
+msgstr "Joueur 1"
+
+#: src/game.c:80 src/screens.c:196
+msgid "Player 2"
+msgstr "Joueur 2"
+
+#: src/game.c:81
+msgid "Computer"
+msgstr "Ordinateur"
+
+#: src/game.c:412
+msgid "Pause"
+msgstr "Pause"
+
+#: src/game.c:522
+#, c-format
+msgid "Stage %d"
+msgstr "Jeu %d"
+
+#: src/game.c:527
+#, c-format
+msgid "Round %d"
+msgstr "Match %d"
+
+#: src/game.c:548 src/game.c:558
+msgid "Win"
+msgstr "Gagné"
+
+#: src/game.c:550 src/game.c:556
+msgid "Lose"
+msgstr "Perdu"
+
+#: src/game.c:564 src/game.c:565
+msgid "Draw"
+msgstr "Match nul"
+
+#: src/loadpng.c:58
+#, c-format
+msgid "File %s does not have a valid PNG signature.\n"
+msgstr "Le fichier %s n'a pas de signature PNG valide.\n"
+
+#: src/screens.c:41
+msgid "Single Player"
+msgstr "Jeu solo"
+
+#: src/screens.c:42
+msgid "Two Players"
+msgstr "Deux joueurs"
+
+#: src/screens.c:43
+msgid "Player vs Computer"
+msgstr "Jeu contre l'ordinateur"
+
+#: src/screens.c:44
+msgid "Challenge"
+msgstr "Défi"
+
+#: src/screens.c:45
+msgid "Quit"
+msgstr "Quitter"
+
+#: src/screens.c:49
+msgid "Very easy"
+msgstr "Très simple"
+
+#: src/screens.c:50
+msgid "Easy"
+msgstr "Simple"
+
+#: src/screens.c:51
+msgid "Normal"
+msgstr "Normal"
+
+#: src/screens.c:52
+msgid "Hard"
+msgstr "Difficile"
+
+#: src/screens.c:53
+msgid "Very hard"
+msgstr "Très difficile"
+
+#: src/screens.c:57
+msgid "Continue"
+msgstr "Continuer"
+
+#: src/screens.c:58
+msgid "End"
+msgstr "Terminer"
+
+#: src/screens.c:63
+msgid "Game Wins"
+msgstr "Jeux gagnés"
+
+#: src/screens.c:64
+msgid "Round Wins"
+msgstr "Matchs gagnés"
+
+#: src/screens.c:65
+msgid "Percentage"
+msgstr "Pourcentage"
+
+#: src/screens.c:102
+msgid "Select computer skill"
+msgstr "Choisissez le talent de l'ordinateur"
+
+#: src/screens.c:159
+msgid "End of game"
+msgstr "Fin de partie"
+
+#: src/screens.c:192 src/screens.c:223
+msgid "Select handicap level"
+msgstr "Choisissez le niveau de handicap"
+
+#: src/screens.c:198 src/screens.c:227
+msgid "Press fire to start"
+msgstr "Appuyez sur feu pour commencer"
+
+#: src/xbubble.c:61
+msgid ""
+"Usage: xbubble [-d display] [-s scale] [-f framerate] [-r resourcepath]\n"
+"\n"
+msgstr ""
+"Usage : xbubble [-d display] [-s échelle] [-f framerate] [-r "
+"chemin_ressources]\n"
+"\n"
+
+#: src/xbubble.c:207
+#, c-format
+msgid "Invalid scale: %s.\n"
+msgstr "Échelle invalide : %s.\n"
+
+#: src/xbubble.c:213
+#, c-format
+msgid "Invalid frame rate: %s.\n"
+msgstr "Framerate invalide : %s.\n"
+
+#: src/xbubble.c:260
+#, c-format
+msgid "XBubble @ %d fps v%s"
+msgstr "XBubble @ %d fps v%s"
diff -ruN -x autom4te.cache xbubble-0.2/po/fr.po~ xbubble-0.2.i18n/po/fr.po~
--- xbubble-0.2/po/fr.po~ 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/fr.po~ 2003-04-09 12:26:14.000000000 +0200
@@ -0,0 +1,209 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR , YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xbubble 0.2\n"
+"POT-Creation-Date: 2003-04-09 12:26+0200\n"
+"PO-Revision-Date: 2003-04-09 12:09+0200\n"
+"Last-Translator: Martin Quinson \n"
+"Language-Team: French \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/init.c:104
+msgid "xbubble : can't open display.\n"
+msgstr "xbubble : Impossible d'ouvrir le display.\n"
+
+#: src/init.c:112
+msgid "Sorry, your display color depth is not supported.\n"
+msgstr "Désolé, le nombre de couleurs de votre affichage n'est pas géré.\n"
+
+#: src/init.c:170
+msgid "xbubble : couldn't load any font.\n"
+msgstr "xbubble : Impossible de charger la moindre police de caractères.\n"
+
+#: src/init.c:183 src/init.c:267
+#, c-format
+msgid "Error scaling %s. Aborting...\n"
+msgstr "Erreur lors de la mise à l'echelle de %s. Abandon...\n"
+
+#: src/init.c:188
+#, c-format
+msgid "Couldn't create pixmaps for image %s. Aborting...\n"
+msgstr ""
+"Impossible de créer les pixmaps correspondant à l'image %s. Abandon...\n"
+
+#: src/init.c:222
+#, c-format
+msgid "Couldn't open description file %s.\n"
+msgstr ""
+
+#: src/init.c:247
+#, c-format
+msgid "Error parsing line %d of file %s.\n"
+msgstr "Erreur de syntaxe à la ligne %d du fichier %s.\n"
+
+#: src/init.c:251
+#, c-format
+msgid "Animation %s has no valid frames.\n"
+msgstr ""
+
+#: src/init.c:271
+#, c-format
+msgid "Couldn't create pixmaps for image %s.\n"
+msgstr "Impossible de créer les pixmaps correspondant à l'image %s.\n"
+
+#: src/init.c:507
+msgid "XBubble"
+msgstr "XBubble"
+
+#: src/init.c:508
+msgid "Loading graphics ..."
+msgstr "Chargement des graphiques ..."
+
+#: src/game.c:79 src/screens.c:194 src/screens.c:225
+msgid "Player 1"
+msgstr "Joueur 1"
+
+#: src/game.c:80 src/screens.c:196
+msgid "Player 2"
+msgstr "Joueur 2"
+
+#: src/game.c:81
+msgid "Computer"
+msgstr "Ordinateur"
+
+#: src/game.c:412
+msgid "Pause"
+msgstr "Pause"
+
+#: src/game.c:522
+#, c-format
+msgid "Stage %d"
+msgstr "Jeu %d"
+
+#: src/game.c:527
+#, c-format
+msgid "Round %d"
+msgstr "Match %d"
+
+#: src/game.c:548 src/game.c:558
+msgid "Win"
+msgstr "Gagné"
+
+#: src/game.c:550 src/game.c:556
+msgid "Lose"
+msgstr "Perdu"
+
+#: src/game.c:564 src/game.c:565
+msgid "Draw"
+msgstr "Match nul"
+
+#: src/loadpng.c:58
+#, c-format
+msgid "File %s does not have a valid PNG signature.\n"
+msgstr "Le fichier %s n'a pas de signature PNG valide.\n"
+
+#: src/screens.c:41
+msgid "Single Player"
+msgstr "Jeu solo"
+
+#: src/screens.c:42
+msgid "Two Players"
+msgstr "Deux joueurs"
+
+#: src/screens.c:43
+msgid "Player vs Computer"
+msgstr "Jeu contre l'ordinateur"
+
+#: src/screens.c:44
+msgid "Challenge"
+msgstr "Défi"
+
+#: src/screens.c:45
+msgid "Quit"
+msgstr "Quitter"
+
+#: src/screens.c:49
+msgid "Very easy"
+msgstr "Très simple"
+
+#: src/screens.c:50
+msgid "Easy"
+msgstr "Simple"
+
+#: src/screens.c:51
+msgid "Normal"
+msgstr "Normal"
+
+#: src/screens.c:52
+msgid "Hard"
+msgstr "Difficile"
+
+#: src/screens.c:53
+msgid "Very hard"
+msgstr "Très difficile"
+
+#: src/screens.c:57
+msgid "Continue"
+msgstr "Continuer"
+
+#: src/screens.c:58
+msgid "End"
+msgstr "Terminer"
+
+#: src/screens.c:63
+msgid "Game Wins"
+msgstr "Jeux gagnés"
+
+#: src/screens.c:64
+msgid "Round Wins"
+msgstr "Matchs gagnés"
+
+#: src/screens.c:65
+msgid "Percentage"
+msgstr "Pourcentage"
+
+#: src/screens.c:102
+msgid "Select computer skill"
+msgstr ""
+
+#: src/screens.c:159
+msgid "End of game"
+msgstr "Fin de partie"
+
+#: src/screens.c:192 src/screens.c:223
+msgid "Select handicap level"
+msgstr "Choisissez le niveau de handicap"
+
+#: src/screens.c:198 src/screens.c:227
+msgid "Press fire to start"
+msgstr "Appuyez sur feu pour commencer"
+
+#: src/xbubble.c:61
+msgid ""
+"Usage: xbubble [-d display] [-s scale] [-f framerate] [-r resourcepath]\n"
+"\n"
+msgstr ""
+"Usage : xbubble [-d display] [-s échelle] [-f framerate] [-r "
+"chemin_ressources]\n"
+"\n"
+
+#: src/xbubble.c:207
+#, c-format
+msgid "Invalid scale: %s.\n"
+msgstr "Échelle invalide : %s.\n"
+
+#: src/xbubble.c:213
+#, c-format
+msgid "Invalid frame rate: %s.\n"
+msgstr "Framerate invalide : %s.\n"
+
+#: src/xbubble.c:260
+#, c-format
+msgid "XBubble @ %d fps v%s"
+msgstr "XBubble @ %d fps v%s"
diff -ruN -x autom4te.cache xbubble-0.2/po/insert-header.sin xbubble-0.2.i18n/po/insert-header.sin
--- xbubble-0.2/po/insert-header.sin 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/insert-header.sin 2002-08-14 11:40:34.000000000 +0200
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -ruN -x autom4te.cache xbubble-0.2/po/LINGUAS xbubble-0.2.i18n/po/LINGUAS
--- xbubble-0.2/po/LINGUAS 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/LINGUAS 2003-04-09 10:18:29.000000000 +0200
@@ -0,0 +1 @@
+fr
diff -ruN -x autom4te.cache xbubble-0.2/po/Makefile.in.in xbubble-0.2.i18n/po/Makefile.in.in
--- xbubble-0.2/po/Makefile.in.in 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/Makefile.in.in 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,317 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SHELL = /bin/sh
address@hidden@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datadir = @datadir@
+localedir = $(datadir)/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
+
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: address@hidden@
+
+all-yes: $(CATALOGS)
+all-no:
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)'
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
+
+
+install: install-exec install-data
+install-exec:
+install-data: address@hidden@
+ if test "$(PACKAGE)" = "gettext"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common); do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: address@hidden@
+ if test "$(PACKAGE)" = "gettext"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: address@hidden@
+ if test "$(PACKAGE)" = "gettext"; then \
+ for file in $(DISTFILES.common); do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+dvi info tags TAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir); \
+ else \
+ cp -p $(srcdir)/$$file $(distdir); \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/address@hidden CONFIG_HEADERS= \
+ $(SHELL) ./config.status
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -ruN -x autom4te.cache xbubble-0.2/po/Makevars xbubble-0.2.i18n/po/Makevars
--- xbubble-0.2/po/Makevars 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/Makevars 2003-04-09 10:06:15.000000000 +0200
@@ -0,0 +1,25 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
diff -ruN -x autom4te.cache xbubble-0.2/po/POTFILES.in xbubble-0.2.i18n/po/POTFILES.in
--- xbubble-0.2/po/POTFILES.in 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/POTFILES.in 2003-04-09 10:20:13.000000000 +0200
@@ -0,0 +1,5 @@
+src/init.c
+src/game.c
+src/loadpng.c
+src/screens.c
+src/xbubble.c
diff -ruN -x autom4te.cache xbubble-0.2/po/quot.sed xbubble-0.2.i18n/po/quot.sed
--- xbubble-0.2/po/quot.sed 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/quot.sed 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/â\1â/g
+s/`\([^`']*\)'/â\1â/g
+s/ '\([^`']*\)' / â\1â /g
+s/ '\([^`']*\)'$/ â\1â/g
+s/^'\([^`']*\)' /â\1â /g
+s/ââ/""/g
diff -ruN -x autom4te.cache xbubble-0.2/po/remove-potcdate.sin xbubble-0.2.i18n/po/remove-potcdate.sin
--- xbubble-0.2/po/remove-potcdate.sin 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/remove-potcdate.sin 2002-08-14 11:40:33.000000000 +0200
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -ruN -x autom4te.cache xbubble-0.2/po/Rules-quot xbubble-0.2.i18n/po/Rules-quot
--- xbubble-0.2/po/Rules-quot 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/Rules-quot 2002-08-14 11:40:34.000000000 +0200
@@ -0,0 +1,42 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed address@hidden address@hidden insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
address@hidden: address@hidden
address@hidden: address@hidden
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
address@hidden: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/address@hidden/g' $(srcdir)/insert-header.sin > address@hidden
+
address@hidden: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/address@hidden/g' $(srcdir)/insert-header.sin > address@hidden
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
diff -ruN -x autom4te.cache xbubble-0.2/po/xbubble.pot xbubble-0.2.i18n/po/xbubble.pot
--- xbubble-0.2/po/xbubble.pot 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/po/xbubble.pot 2003-04-09 12:26:14.000000000 +0200
@@ -0,0 +1,206 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR , YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2003-04-09 12:26+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME \n"
+"Language-Team: LANGUAGE \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/init.c:104
+msgid "xbubble : can't open display.\n"
+msgstr ""
+
+#: src/init.c:112
+msgid "Sorry, your display color depth is not supported.\n"
+msgstr ""
+
+#: src/init.c:170
+msgid "xbubble : couldn't load any font.\n"
+msgstr ""
+
+#: src/init.c:183 src/init.c:267
+#, c-format
+msgid "Error scaling %s. Aborting...\n"
+msgstr ""
+
+#: src/init.c:188
+#, c-format
+msgid "Couldn't create pixmaps for image %s. Aborting...\n"
+msgstr ""
+
+#: src/init.c:222
+#, c-format
+msgid "Couldn't open description file %s.\n"
+msgstr ""
+
+#: src/init.c:247
+#, c-format
+msgid "Error parsing line %d of file %s.\n"
+msgstr ""
+
+#: src/init.c:251
+#, c-format
+msgid "Animation %s has no valid frames.\n"
+msgstr ""
+
+#: src/init.c:271
+#, c-format
+msgid "Couldn't create pixmaps for image %s.\n"
+msgstr ""
+
+#: src/init.c:507
+msgid "XBubble"
+msgstr ""
+
+#: src/init.c:508
+msgid "Loading graphics ..."
+msgstr ""
+
+#: src/game.c:79 src/screens.c:194 src/screens.c:225
+msgid "Player 1"
+msgstr ""
+
+#: src/game.c:80 src/screens.c:196
+msgid "Player 2"
+msgstr ""
+
+#: src/game.c:81
+msgid "Computer"
+msgstr ""
+
+#: src/game.c:412
+msgid "Pause"
+msgstr ""
+
+#: src/game.c:522
+#, c-format
+msgid "Stage %d"
+msgstr ""
+
+#: src/game.c:527
+#, c-format
+msgid "Round %d"
+msgstr ""
+
+#: src/game.c:548 src/game.c:558
+msgid "Win"
+msgstr ""
+
+#: src/game.c:550 src/game.c:556
+msgid "Lose"
+msgstr ""
+
+#: src/game.c:564 src/game.c:565
+msgid "Draw"
+msgstr ""
+
+#: src/loadpng.c:58
+#, c-format
+msgid "File %s does not have a valid PNG signature.\n"
+msgstr ""
+
+#: src/screens.c:41
+msgid "Single Player"
+msgstr ""
+
+#: src/screens.c:42
+msgid "Two Players"
+msgstr ""
+
+#: src/screens.c:43
+msgid "Player vs Computer"
+msgstr ""
+
+#: src/screens.c:44
+msgid "Challenge"
+msgstr ""
+
+#: src/screens.c:45
+msgid "Quit"
+msgstr ""
+
+#: src/screens.c:49
+msgid "Very easy"
+msgstr ""
+
+#: src/screens.c:50
+msgid "Easy"
+msgstr ""
+
+#: src/screens.c:51
+msgid "Normal"
+msgstr ""
+
+#: src/screens.c:52
+msgid "Hard"
+msgstr ""
+
+#: src/screens.c:53
+msgid "Very hard"
+msgstr ""
+
+#: src/screens.c:57
+msgid "Continue"
+msgstr ""
+
+#: src/screens.c:58
+msgid "End"
+msgstr ""
+
+#: src/screens.c:63
+msgid "Game Wins"
+msgstr ""
+
+#: src/screens.c:64
+msgid "Round Wins"
+msgstr ""
+
+#: src/screens.c:65
+msgid "Percentage"
+msgstr ""
+
+#: src/screens.c:102
+msgid "Select computer skill"
+msgstr ""
+
+#: src/screens.c:159
+msgid "End of game"
+msgstr ""
+
+#: src/screens.c:192 src/screens.c:223
+msgid "Select handicap level"
+msgstr ""
+
+#: src/screens.c:198 src/screens.c:227
+msgid "Press fire to start"
+msgstr ""
+
+#: src/xbubble.c:61
+msgid ""
+"Usage: xbubble [-d display] [-s scale] [-f framerate] [-r resourcepath]\n"
+"\n"
+msgstr ""
+
+#: src/xbubble.c:207
+#, c-format
+msgid "Invalid scale: %s.\n"
+msgstr ""
+
+#: src/xbubble.c:213
+#, c-format
+msgid "Invalid frame rate: %s.\n"
+msgstr ""
+
+#: src/xbubble.c:260
+#, c-format
+msgid "XBubble @ %d fps v%s"
+msgstr ""
diff -ruN -x autom4te.cache xbubble-0.2/src/game.c xbubble-0.2.i18n/src/game.c
--- xbubble-0.2/src/game.c 2002-08-22 14:27:06.000000000 +0200
+++ xbubble-0.2.i18n/src/game.c 2003-04-09 11:59:49.000000000 +0200
@@ -28,6 +28,8 @@
#include
#include
+#include "gettext.h"
+
#include "utils.h"
#include "data.h"
#include "rectangle.h"
@@ -74,9 +76,9 @@
Game current_game = NULL;
#define PERIOD 12
-#define PLAYER1_TAG "Player 1"
-#define PLAYER2_TAG "Player 2"
-#define COMPUTER_TAG "Computer"
+#define PLAYER1_TAG N_("Player 1")
+#define PLAYER2_TAG N_("Player 2")
+#define COMPUTER_TAG N_("Computer")
char *player_name[][2] = {
{ PLAYER1_TAG, "" },
@@ -174,7 +176,7 @@
display_cups( game, i, False );
game->tags[i] = create_dialog( game->board_x[i] + board_win_width(scale)/2,
game->board_y[i] - board_spacing(scale),
- player_name[mode][i], menu_font,
+ gettext(player_name[mode][i]), menu_font,
get_pixel( 0xff, 0xff, 0xff ), 0, 1.0 );
game->board_window[i] =
XCreateSimpleWindow( display, win, game->board_x[i],
@@ -407,7 +409,7 @@
if ( game->pause_pressed ) {
game->state = PAUSED;
for ( i = 0; i < game->nb_boards; i++ )
- show_board_msg( game, i, "Pause" );
+ show_board_msg( game, i, _("Pause") );
break;
}
/* abort with ESC key (or any key in demo mode) */
@@ -512,17 +514,17 @@
}
static void show_start_boxes( Game game ) {
- static char msg[20];
+ static char msg[40];
/* enter X critical section */
block_timer();
switch ( game->mode ) {
case SINGLE_PLAYER:
- sprintf( msg, "Stage %d", game->round );
+ sprintf( msg, _("Stage %d"), game->round );
show_board_msg( game, 0, msg );
break;
case TWO_PLAYERS:
case PLAYER_VS_COMPUTER:
- sprintf( msg, "Round %d", game->round );
+ sprintf( msg, _("Round %d"), game->round );
show_board_msg( game, 0, msg );
show_board_msg( game, 1, msg );
break;
@@ -543,24 +545,24 @@
block_timer();
switch ( game->result ) {
case PLAYER1_WON:
- show_board_msg( game, 0, "Win" );
+ show_board_msg( game, 0, _("Win") );
if ( game->multi_player ) {
- show_board_msg( game, 1, "Lose" );
+ show_board_msg( game, 1, _("Lose") );
game->score[0]++;
winner = 0;
}
break;
case PLAYER1_LOST:
- show_board_msg( game, 0, "Lose" );
+ show_board_msg( game, 0, _("Lose") );
if ( game->multi_player ) {
- show_board_msg( game, 1, "Win" );
+ show_board_msg( game, 1, _("Win") );
game->score[1]++;
winner = 1;
}
break;
case DRAW:
- show_board_msg( game, 0, "Draw" );
- show_board_msg( game, 1, "Draw" );
+ show_board_msg( game, 0, _("Draw") );
+ show_board_msg( game, 1, _("Draw") );
break;
case ABORTED:
return;
diff -ruN -x autom4te.cache xbubble-0.2/src/gettext.h xbubble-0.2.i18n/src/gettext.h
--- xbubble-0.2/src/gettext.h 1970-01-01 01:00:00.000000000 +0100
+++ xbubble-0.2.i18n/src/gettext.h 2003-04-09 10:42:41.000000000 +0200
@@ -0,0 +1,73 @@
+/* Convenience header for conditional use of GNU .
+ Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option. */
+#if ENABLE_NLS
+
+/* Get declarations of GNU message catalog functions. */
+# include
+
+#else
+
+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
+ chokes if dcgettext is defined as a macro. So include it now, to make
+ later inclusions of a NOP. We don't include
+ as well because people using "gettext.h" will not include ,
+ and also including would fail on SunOS 4, whereas
+ is OK. */
+#if defined(__sun)
+# include
+#endif
+
+/* Disabled NLS.
+ The casts to 'const char *' serve the purpose of producing warnings
+ for invalid uses of the value returned from these functions.
+ On pre-ANSI systems without 'const', the config.h file is supposed to
+ contain "#define const". */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
+
+#endif
+
+/* A pseudo function call that serves as a marker for the automated
+ extraction of messages, but does not call gettext(). The run-time
+ translation is done at a different place in the code.
+ The argument, String, should be a literal string. Concatenated strings
+ and other string expressions won't work.
+ The macro's expansion is not parenthesized, so that it is suitable as
+ initializer for static 'char[]' or 'const char[]' variables. */
+#define gettext_noop(String) String
+
+
+#define N_(String) gettext_noop(String)
+#define _(String) gettext(String)
+
+#endif /* _LIBGETTEXT_H */
diff -ruN -x autom4te.cache xbubble-0.2/src/init.c xbubble-0.2.i18n/src/init.c
--- xbubble-0.2/src/init.c 2002-08-22 14:15:28.000000000 +0200
+++ xbubble-0.2.i18n/src/init.c 2003-04-09 10:44:35.000000000 +0200
@@ -26,6 +26,8 @@
#include
#include
+#include "gettext.h"
+
#include "rgba.h"
#include "data.h"
#include "dialog.h"
@@ -99,7 +101,7 @@
XColor colors[256];
display = XOpenDisplay( display_name );
if ( display == NULL ) {
- fprintf( stderr,"xbubble : can't open display.\n");
+ fprintf( stderr,_("xbubble : can't open display.\n"));
exit(1);
}
screen = DefaultScreen( display);
@@ -107,7 +109,7 @@
root = RootWindow( display, screen);
depth = DefaultDepth( display, screen);
if ( depth < 8 ) {
- fprintf( stderr, "Sorry, your display color depth is not supported.\n");
+ fprintf( stderr, _("Sorry, your display color depth is not supported.\n"));
XCloseDisplay(display);
exit(0);
}
@@ -165,7 +167,7 @@
/* at least we have the "fixed" font ... uurgh */
if (( xfont = XLoadQueryFont( display, "fixed" )) != NULL )
return xfont;
- fprintf( stderr, "xbubble : couldn't load any font.\n" );
+ fprintf( stderr, _("xbubble : couldn't load any font.\n") );
exit(1);
}
@@ -178,12 +180,12 @@
exit(1);
ri2 = scale_down_rgba_image( ri, zoom, zoom );
if ( ri2 == NULL ) {
- fprintf( stderr, "Error scaling %s. Aborting...\n", file );
+ fprintf( stderr, _("Error scaling %s. Aborting...\n"), file );
exit(1);
}
pmask = ( ri2->has_alpha )? &mask : NULL;
if ( ! create_pixmaps_from_rgba_image( ri2, &pixmap, pmask )) {
- fprintf( stderr, "Couldn't create pixmaps for image %s. Aborting...\n",
+ fprintf( stderr, _("Couldn't create pixmaps for image %s. Aborting...\n"),
file );
exit(1);
}
@@ -217,7 +219,7 @@
/* open animation description file */
fd = fopen( data_file(filename), "r" );
if ( fd == NULL ) {
- fprintf(stderr, "Couldn't open description file %s.\n",
+ fprintf(stderr, _("Couldn't open description file %s.\n"),
data_file(filename) );
return NULL;
}
@@ -242,11 +244,11 @@
frame->delay = delay;
}
else
- fprintf(stderr,"Error parsing line %d of file %s.\n", lc, filename);
+ fprintf(stderr,_("Error parsing line %d of file %s.\n"), lc, filename);
}
}
if ( animation->size == 0 ) {
- fprintf(stderr,"Animation %s has no valid frames.\n",filename);
+ fprintf(stderr,_("Animation %s has no valid frames.\n"),filename);
exit(1);
}
}
@@ -262,11 +264,11 @@
ri2 = ri;
if (( zoom < 1.0 )&&
(( ri2 = scale_down_rgba_image( ri, zoom, zoom )) == NULL )) {
- fprintf( stderr, "Error scaling %s. Aborting...\n", file );
+ fprintf( stderr, _("Error scaling %s. Aborting...\n"), file );
exit(1);
}
if ( ! create_pixmaps_from_rgba_image( ri2, pixmap, mask )) {
- fprintf( stderr, "Couldn't create pixmaps for image %s.\n", file );
+ fprintf( stderr, _("Couldn't create pixmaps for image %s.\n"), file );
exit(1);
}
delete_rgba_image(ri);
@@ -502,8 +504,8 @@
XGCValues gcv;
int height1, height2;
unsigned long gcm;
- char * title = "XBubble";
- char * subtitle = "Loading graphics ...";
+ char * title = N_("XBubble");
+ char * subtitle = N_("Loading graphics ...");
load_scaled_image( data_file(WIN_BG), &win_bg, NULL, 1.0 );
XSetWindowBackgroundPixmap( display, win, win_bg );
XMapWindow( display, win );
@@ -521,9 +523,9 @@
/* GC for tiling dialogs background */
XSetFillStyle( display, dialog_gc, FillTiled );
XSetTile( display, dialog_gc, win_bg );
- splash1 = create_dialog( win_width/2, ( win_height - height2 )/2, title,
+ splash1 = create_dialog( win_width/2, ( win_height - height2 )/2, gettext(title),
title_font, get_pixel( 0xff, 0xe4, 0xff ), 0, 1.0 );
- splash2 = create_dialog( win_width/2, ( win_height + height1 )/2, subtitle,
+ splash2 = create_dialog( win_width/2, ( win_height + height1 )/2, gettext(subtitle),
menu_font, get_pixel( 0xff, 0x40, 0xc4 ), 0, 1.0 );
load_animations(zoom);
load_images(zoom);
diff -ruN -x autom4te.cache xbubble-0.2/src/loadpng.c xbubble-0.2.i18n/src/loadpng.c
--- xbubble-0.2/src/loadpng.c 2002-08-22 11:38:52.000000000 +0200
+++ xbubble-0.2.i18n/src/loadpng.c 2003-04-09 10:44:41.000000000 +0200
@@ -22,6 +22,8 @@
#include
#include
+#include "gettext.h"
+
/*
* load_png_file() allocates a byte array and fills it with
* a contiguous sequence of 4-byte pixels in RGBA format:
@@ -53,7 +55,7 @@
fread( header, 1, 8, fd );
if ( ! png_check_sig( header, 8 ) ) {
fclose(fd);
- fprintf(stderr,"File %s does not have a valid PNG signature.\n", file);
+ fprintf(stderr,_("File %s does not have a valid PNG signature.\n"), file);
return NULL;
}
/* create PNG structs */
diff -ruN -x autom4te.cache xbubble-0.2/src/Makefile.am xbubble-0.2.i18n/src/Makefile.am
--- xbubble-0.2/src/Makefile.am 2002-03-09 16:31:00.000000000 +0100
+++ xbubble-0.2.i18n/src/Makefile.am 2003-04-09 10:52:09.000000000 +0200
@@ -6,7 +6,7 @@
game.h data.h dialog.c dialog.h screens.c screens.h xbubble.c
# We don't need autoconf symbols here
-DEFS=
+#DEFS=
xbubble.o: xbubble.c data.h game.h screens.h init.h
$(COMPILE) @DEFS@ -DDATADIR=\"$(pkgdatadir)\" -c xbubble.c
diff -ruN -x autom4te.cache xbubble-0.2/src/Makefile.in xbubble-0.2.i18n/src/Makefile.in
--- xbubble-0.2/src/Makefile.in 2002-08-22 15:31:19.000000000 +0200
+++ xbubble-0.2.i18n/src/Makefile.in 2003-04-09 12:25:58.000000000 +0200
@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.3 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -10,293 +12,425 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
address@hidden@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
CC = @CC@
-MAKEINFO = @MAKEINFO@
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-bin_PROGRAMS = xbubble
-
-xbubble_SOURCES = utils.c utils.h rectangle.c rectangle.h cell.c cell.h loadpng.c loadpng.h rgba.c rgba.h frame.h init.c init.h sprite.c sprite.h bubble.c bubble.h opponent.c opponent.h board.c board.h controls.h game.c game.h data.h dialog.c dialog.h screens.c screens.h xbubble.c
-
-
-# We don't need autoconf symbols here
-DEFS =
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(bin_PROGRAMS)
-
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
X_CFLAGS = @X_CFLAGS@
-X_LIBS = @X_LIBS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
-xbubble_OBJECTS = utils.o rectangle.o cell.o loadpng.o rgba.o init.o \
-sprite.o bubble.o opponent.o board.o game.o dialog.o screens.o \
-xbubble.o
-xbubble_LDADD = $(LDADD)
-xbubble_DEPENDENCIES =
-xbubble_LDFLAGS =
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON = Makefile.am Makefile.in
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+bin_PROGRAMS = xbubble
+xbubble_SOURCES = utils.c utils.h rectangle.c rectangle.h cell.c cell.h \
+loadpng.c loadpng.h rgba.c rgba.h frame.h init.c init.h sprite.c sprite.h \
+bubble.c bubble.h opponent.c opponent.h board.c board.h controls.h game.c \
+game.h data.h dialog.c dialog.h screens.c screens.h xbubble.c
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+subdir = src
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = xbubble$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+am_xbubble_OBJECTS = utils.$(OBJEXT) rectangle.$(OBJEXT) cell.$(OBJEXT) \
+ loadpng.$(OBJEXT) rgba.$(OBJEXT) init.$(OBJEXT) \
+ sprite.$(OBJEXT) bubble.$(OBJEXT) opponent.$(OBJEXT) \
+ board.$(OBJEXT) game.$(OBJEXT) dialog.$(OBJEXT) \
+ screens.$(OBJEXT) xbubble.$(OBJEXT)
+xbubble_OBJECTS = $(am_xbubble_OBJECTS)
+xbubble_LDADD = $(LDADD)
+xbubble_DEPENDENCIES =
+xbubble_LDFLAGS =
-TAR = tar
-GZIP_ENV = --best
+DEFAULT_INCLUDES = -I. -I$(srcdir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
address@hidden@DEP_FILES = ./$(DEPDIR)/board.Po ./$(DEPDIR)/bubble.Po \
address@hidden@ ./$(DEPDIR)/cell.Po ./$(DEPDIR)/dialog.Po \
address@hidden@ ./$(DEPDIR)/game.Po ./$(DEPDIR)/init.Po \
address@hidden@ ./$(DEPDIR)/loadpng.Po ./$(DEPDIR)/opponent.Po \
address@hidden@ ./$(DEPDIR)/rectangle.Po ./$(DEPDIR)/rgba.Po \
address@hidden@ ./$(DEPDIR)/screens.Po ./$(DEPDIR)/sprite.Po \
address@hidden@ ./$(DEPDIR)/utils.Po ./$(DEPDIR)/xbubble.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(xbubble_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
SOURCES = $(xbubble_SOURCES)
-OBJECTS = $(xbubble_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-maintainer-clean-binPROGRAMS:
+all: all-am
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
- if test -f $$p; then \
- echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
- $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- list='$(bin_PROGRAMS)'; for p in $$list; do \
- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+ rm -f $(DESTDIR)$(bindir)/$$f; \
done
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
-
-.S.o:
- $(COMPILE) -c $<
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+xbubble$(EXEEXT): $(xbubble_OBJECTS) $(xbubble_DEPENDENCIES)
+ @rm -f xbubble$(EXEEXT)
+ $(LINK) $(xbubble_LDFLAGS) $(xbubble_OBJECTS) $(xbubble_LDADD) $(LIBS)
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
address@hidden@@am__include@ @address@hidden/$(DEPDIR)/address@hidden@
-xbubble: $(xbubble_OBJECTS) $(xbubble_DEPENDENCIES)
- @rm -f xbubble
- $(LINK) $(xbubble_LDFLAGS) $(xbubble_OBJECTS) $(xbubble_LDADD) $(LIBS)
+distclean-depend:
+ -rm -rf ./$(DEPDIR)
+
+.c.o:
address@hidden@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
address@hidden@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
address@hidden@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
address@hidden@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
address@hidden@ fi
address@hidden@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
address@hidden@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
address@hidden@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
address@hidden@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
address@hidden@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
address@hidden@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
address@hidden@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
address@hidden@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
address@hidden@ fi
address@hidden@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
address@hidden@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
address@hidden@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
address@hidden@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = src
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-board.o: board.c utils.h cell.h data.h bubble.h sprite.h rectangle.h \
- frame.h board.h
-bubble.o: bubble.c utils.h frame.h sprite.h rectangle.h data.h board.h \
- cell.h bubble.h
-cell.o: cell.c utils.h data.h bubble.h sprite.h rectangle.h cell.h
-dialog.o: dialog.c rgba.h controls.h
-game.o: game.c utils.h data.h rectangle.h sprite.h rgba.h board.h cell.h \
- bubble.h opponent.h controls.h dialog.h game.h
-init.o: init.c rgba.h data.h dialog.h frame.h bubble.h sprite.h utils.h \
- rectangle.h board.h cell.h
-loadpng.o: loadpng.c
-opponent.o: opponent.c utils.h cell.h data.h bubble.h sprite.h \
- rectangle.h board.h opponent.h
-rectangle.o: rectangle.c utils.h rectangle.h
-rgba.o: rgba.c utils.h loadpng.h rgba.h
-screens.o: screens.c rgba.h dialog.h screens.h game.h board.h cell.h \
- utils.h data.h bubble.h sprite.h rectangle.h opponent.h
-sprite.o: sprite.c utils.h rectangle.h frame.h sprite.h
-utils.o: utils.c utils.h
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-binPROGRAMS
-install-exec: install-exec-am
+all-am: Makefile $(PROGRAMS)
-install-data-am:
-install-data: install-data-am
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
-uninstall-am: uninstall-binPROGRAMS
+install-exec: install-exec-am
+install-data: install-data-am
uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-clean-am: clean-binPROGRAMS clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
-clean: clean-am
+distclean-am: clean-am distclean-compile distclean-depend \
+ distclean-generic distclean-tags
-distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \
- distclean-generic clean-am
+dvi: dvi-am
-distclean: distclean-am
+dvi-am:
-maintainer-clean-am: maintainer-clean-binPROGRAMS \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
-.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic ctags distclean distclean-compile \
+ distclean-depend distclean-generic distclean-tags distdir dvi \
+ dvi-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-binPROGRAMS uninstall-info-am
+
+
+# We don't need autoconf symbols here
+#DEFS=
xbubble.o: xbubble.c data.h game.h screens.h init.h
$(COMPILE) @DEFS@ -DDATADIR=\"$(pkgdatadir)\" -c xbubble.c
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff -ruN -x autom4te.cache xbubble-0.2/src/screens.c xbubble-0.2.i18n/src/screens.c
--- xbubble-0.2/src/screens.c 2002-08-19 19:24:00.000000000 +0200
+++ xbubble-0.2.i18n/src/screens.c 2003-04-09 12:25:50.000000000 +0200
@@ -22,6 +22,8 @@
#include
#include