[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Chinese-volunteers] Why my SHELL(ash) does not work on 386SX , mayday..
From: |
罗智 |
Subject: |
[Chinese-volunteers] Why my SHELL(ash) does not work on 386SX , mayday...mayday...! |
Date: |
Sat, 29 Apr 2006 16:45:45 +0800 |
My system is made with linux kernel 2.4.20
+ busybox1.1.0 + RootFileSystem which is manually
created. it's ok on several PC
.
When I move this system to my embedded
computer (CPU:ALI 6117,includes 386SX ) , problems
occurred.
The kernel works ok on the embedded system
, I think ,during the booting .the /etc/init.d/rcS is
ok ,too. the embedded system stop when
shell should get out and show shell prompt.
I have tried three /etc/inittab
:
1:tty1::respawn:/sbin/getty 38400
tty1
Embedded system show "login:",but when I insert username
and press enter ,"login:" come out
again. no shell prompt show
out.
2:tty1::askfirst:/bin/sh
Everything is ok when booting ,
system go into " Please press Enter to activate this console".
but this
statement show again when I press enter. system still can't go into
shell.
3:tty1::respawn:/bin/sh
the phenomena is nothing .
booting is ok , but nothing show out at last . system idles there,
Can not go
into shell!
In a word , shell can't work correctly, I
hope experts can give me some advice.
thank you very much
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Chinese-volunteers] Why my SHELL(ash) does not work on 386SX , mayday...mayday...!,
罗智 <=