qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-stable] [PATCH v2 2/2] docs/interop/bitmaps: rewrite and modernize


From: John Snow
Subject: [Qemu-stable] [PATCH v2 2/2] docs/interop/bitmaps: rewrite and modernize doc
Date: Mon, 22 Apr 2019 18:17:14 -0400

This just about rewrites the entirety of the bitmaps.rst document to
make it consistent with the 4.0 release. I have added new features seen
in the 4.0 release, as well as tried to clarify some points that keep
coming up when discussing this feature both in-house and upstream.

Yes, it's a lot longer, mostly due to examples. I get a bit chatty.
I could use a good editor to help reign in my chattiness.

It does not yet cover pull backups or migration details, but I intend to
keep extending this document to cover those cases.

Please try compiling it with sphinx and look at the rendered output, I
don't have hosting to share my copy at present. I think this new layout
reads nicer in the HTML format than the old one did, at the expense of
looking less readable in the source tree itself (though not completely
unmanagable. We did decide to convert it from Markdown to ReST, after
all, so I am going all-in on ReST.)

Signed-off-by: John Snow <address@hidden>
---
 docs/interop/bitmaps.rst | 1600 ++++++++++++++++++++++++++++++--------
 1 file changed, 1265 insertions(+), 335 deletions(-)

diff --git a/docs/interop/bitmaps.rst b/docs/interop/bitmaps.rst
index 7bcfe7f461..becff537d8 100644
--- a/docs/interop/bitmaps.rst
+++ b/docs/interop/bitmaps.rst
@@ -1,5 +1,5 @@
 ..
-   Copyright 2015 John Snow <address@hidden> and Red Hat, Inc.
+   Copyright 2019 John Snow <address@hidden> and Red Hat, Inc.
    All rights reserved.
 
    This file is licensed via The FreeBSD Documentation License, the full
@@ -9,547 +9,1477 @@
 Dirty Bitmaps and Incremental Backup
 ====================================
 
--  Dirty Bitmaps are objects that track which data needs to be backed up
-   for the next incremental backup.
+Dirty Bitmaps are in-memory objects that track writes to block devices. They
+can be used in conjunction with various block job operations to perform
+incremental or differential backup regimens.
 
--  Dirty bitmaps can be created at any time and attached to any node
-   (not just complete drives).
+This document explains the conceptual mechanisms, as well as up-to-date,
+complete and comprehensive documentation on the API to manipulate them.
+(Hopefully, the "why", "what", and "how".)
+
+The intended audience for this document is developers who are adding QEMU
+backup features to management applications, or power users who run and
+administer QEMU directly via QMP.
 
 .. contents::
 
+Overview
+--------
+
+Bitmaps are bit vectors where each '1' bit in the vector indicates a modified
+("dirty") segment of the corresponding block device. The size of the segment
+that is tracked is the granularity of the bitmap. If the granularity of a
+bitmap is 64K, each '1' bit means that a 64K region as a whole may have
+changed in some way, possibly by as little as one byte.
+
+Smaller granularities mean more accurate tracking of modified disk data, but
+requires more computational overhead and larger bitmap sizes. Larger
+granularities mean smaller bitmap sizes, but less targeted backups.
+
+The size of a bitmap (in bytes) can be computed as such:
+    ``size`` = ceil(ceil(``image_size`` / ``granularity``) / 8)
+
+e.g. the size of a 64KiB granularity bitmap on a 2TiB image is:
+    ``size`` = ((2147483648K / 64K) / 8)
+         = 4194304B = 4MiB.
+
+QEMU uses these bitmaps when making incremental backups to know which sections
+of the file to copy out. They are not enabled by default and must be
+explicitly added in order to begin tracking writes.
+
+Bitmaps can be created at any time and can be attached to any arbitrary block
+node in the storage graph, but are most useful conceptually when attached to
+the root node attached to the guest's storage device model.
+
+That is to say: It's likely most useful to track the guest's writes to disk,
+but you could theoretically track things like qcow2 metadata changes by
+attaching the bitmap elsewhere in the storage graph. This is beyond the scope
+of this document.
+
+QEMU supports persisting these bitmaps to disk via the qcow2 image format.
+Bitmaps which are stored or loaded in this way are called "persistent",
+whereas bitmaps that are not are called "transient".
+
+QEMU also supports the migration of both transient bitmaps (tracking any
+arbitrary image format) or persistent bitmaps (qcow2) via live migration.
+
+Supported Image Formats
+-----------------------
+
+QEMU supports all documented features below on the qcow2 image format.
+
+However, qcow2 is only strictly necessary for the persistence feature, which
+writes bitmap data to disk upon close. If persistence is not required for a
+specific use case, all bitmap features excepting persistence are available for
+any arbitrary image format.
+
+For example, Dirty Bitmaps can be combined with the 'raw' image format, but
+any changes to the bitmap will be discarded upon exit.
+
+.. warning:: Transient bitmaps will not be saved on QEMU exit! Persistent
+             bitmaps are available only on qcow2 images.
+
 Dirty Bitmap Names
 ------------------
 
--  A dirty bitmap's name is unique to the node, but bitmaps attached to
-   different nodes can share the same name.
+Bitmap objects need a method to reference them in the API. All API-created and
+managed bitmaps have a human-readable name chosen by the user at creation
+time.
 
--  Dirty bitmaps created for internal use by QEMU may be anonymous and
-   have no name, but any user-created bitmaps must have a name. There
-   can be any number of anonymous bitmaps per node.
+- A bitmap's name is unique to the node, but bitmaps attached to different
+  nodes can share the same name. Therefore, all bitmaps are addressed via
+  their (node, name) pair.
 
--  The name of a user-created bitmap must not be empty ("").
+- The name of a user-created bitmap cannot be empty ("").
 
-Bitmap Modes
-------------
+- Transient bitmaps can have JSON unicode names that are effectively not
+  length limited. (QMP protocol may restrict messages to less than 64MiB.)
 
--  A bitmap can be "frozen," which means that it is currently in-use by
-   a backup operation and cannot be deleted, renamed, written to, reset,
-   etc.
+- Persistent storage formats may impose their own requirements on bitmap names
+  and namespaces. Presently, only qcow2 supports persistent bitmaps. See
+  docs/interop/qcow2.txt for more details on restrictions. Notably:
 
--  The normal operating mode for a bitmap is "active."
+   - qcow2 bitmap names are limited to between 1 and 1023 bytes long.
+
+   - No two bitmaps saved to the same qcow2 file may share the same name.
+
+- QEMU occasionally uses bitmaps for internal use which have no name. They are
+  hidden from API query calls, cannot be manipulated by the external API, are
+  never persistent, nor ever migrated.
+
+Bitmap Status
+-------------
+
+Dirty Bitmap objects can be queried with the QMP command `query-block
+<qemu-qmp-ref.html#index-query_002dblock>`_, and are visible via the
+`BlockDirtyInfo <qemu-qmp-ref.html#index-BlockDirtyInfo>`_ QAPI structure.
+
+This struct shows the name, granularity, and dirty byte count for each bitmap.
+Additionally, it shows several boolean status indicators:
+
+- ``recording``: This bitmap is recording writes.
+- ``busy``: This bitmap is in-use by an operation.
+- ``persistent``: This bitmap is a persistent type.
+- ``inconsistent``: This bitmap is corrupted and cannot be used.
+
+The ``+busy`` status prohibits you from deleting, clearing, or otherwise
+modifying a bitmap, and happens when the bitmap is being used for a backup
+operation or is in the process of being loaded from a migration. Many of the
+commands documented below will refuse to work on such bitmaps.
+
+The ``+inconsistent`` status similarly prohibits almost all operations,
+notably allowing only the ``block-dirty-bitmap-remove`` operation.
+
+There is also a deprecated "`DirtyBitmapStatus
+<qemu-qmp-ref.html#index-DirtyBitmapStatus>`_" field. a bitmap historically
+had five visible states:
+
+   #. ``Frozen``: This bitmap is currently in-use by an operation and is
+      immutable. It can't be deleted, renamed, reset, etc.
+
+      (This is now ``+busy``.)
+
+   #. ``Disabled``: This bitmap is not recording new writes.
+
+      (This is now ``-recording -busy``.)
+
+   #. ``Active``: This bitmap is recording new writes.
+
+      (This is now ``+recording -busy``.)
+
+   #. ``Locked``: This bitmap is in-use by an operation, and is immutable.
+      The difference from "Frozen" was primarily implementation details.
+
+      (This is now ``+busy``.)
+
+   #. ``Inconsistent``: This persistent bitmap was not saved to disk
+      correctly, and can no longer be used. It remains in memory to serve as
+      an indicator of failure.
+
+      (This is now ``+inconsistent``.)
+
+These states are directly replaced by the status indicators and should not be
+used. The difference between ``Frozen`` and ``Locked`` is an implementation
+detail and should not be relevant to external users.
 
 Basic QMP Usage
 ---------------
 
+The primary interface to manipulating bitmap objects is via the QMP
+interface. If you are not familiar, see docs/interop/qmp-intro.txt for a broad
+overview, and `qemu-qmp-ref <qemu-qmp-ref.html>`_ for a full reference of all
+QMP commands.
+
 Supported Commands
 ~~~~~~~~~~~~~~~~~~
 
+There are six primary bitmap-management API commands:
+
 - ``block-dirty-bitmap-add``
 - ``block-dirty-bitmap-remove``
 - ``block-dirty-bitmap-clear``
+- ``block-dirty-bitmap-disable``
+- ``block-dirty-bitmap-enable``
+- ``block-dirty-bitmap-merge``
 
-Creation
-~~~~~~~~
+And one related query command:
 
--  To create a new bitmap, enabled, on the drive with id=drive0:
+- ``query-block``
 
-.. code:: json
+Creation: block-dirty-bitmap-add
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-    { "execute": "block-dirty-bitmap-add",
-      "arguments": {
-        "node": "drive0",
-        "name": "bitmap0"
-      }
-    }
+`block-dirty-bitmap-add
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002dadd>`_:
 
--  This bitmap will have a default granularity that matches the cluster
-   size of its associated drive, if available, clamped to between [4KiB,
-   64KiB]. The current default for qcow2 is 64KiB.
+Creates a new bitmap that tracks writes to the specified node. granularity,
+persistence, and recording state can be adjusted at creation time.
 
--  To create a new bitmap that tracks changes in 32KiB segments:
+.. admonition:: Example
 
-.. code:: json
+ to create a new, actively recording persistent bitmap:
 
-    { "execute": "block-dirty-bitmap-add",
-      "arguments": {
-        "node": "drive0",
-        "name": "bitmap0",
-        "granularity": 32768
-      }
-    }
+ .. code:: json
 
-Deletion
-~~~~~~~~
+  -> { "execute": "block-dirty-bitmap-add",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap0",
+         "persistent": true,
+       }
+     }
 
--  Bitmaps that are frozen cannot be deleted.
+  <- { "return": {} }
 
--  Deleting the bitmap does not impact any other bitmaps attached to the
-   same node, nor does it affect any backups already created from this
-   node.
+- This bitmap will have a default granularity that matches the cluster size of
+  its associated drive, if available, clamped to between [4KiB, 64KiB]. The
+  current default for qcow2 is 64KiB.
 
--  Because bitmaps are only unique to the node to which they are
-   attached, you must specify the node/drive name here, too.
+.. admonition:: Example
 
-.. code:: json
+ To create a new, disabled (``-recording``), transient bitmap that tracks
+ changes in 32KiB segments:
 
-    { "execute": "block-dirty-bitmap-remove",
-      "arguments": {
-        "node": "drive0",
-        "name": "bitmap0"
-      }
-    }
+ .. code:: json
 
-Resetting
-~~~~~~~~~
+  -> { "execute": "block-dirty-bitmap-add",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap1",
+         "granularity": 32768,
+         "disabled": true
+       }
+     }
 
--  Resetting a bitmap will clear all information it holds.
+  <- { "return": {} }
 
--  An incremental backup created from an empty bitmap will copy no data,
-   as if nothing has changed.
+Deletion: block-dirty-bitmap-remove
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-.. code:: json
+`block-dirty-bitmap-remove
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002dremove>`_:
 
-    { "execute": "block-dirty-bitmap-clear",
-      "arguments": {
-        "node": "drive0",
-        "name": "bitmap0"
-      }
-    }
+Deletes a bitmap. Bitmaps that are ``+busy`` cannot be removed.
+
+- Deleting a bitmap does not impact any other bitmaps attached to the same
+  node, nor does it affect any backups already created from this bitmap or
+  node.
+
+- Because bitmaps are only unique to the node to which they are attached, you
+  must specify the node/drive name here, too.
+
+- Deleting a persistent bitmap will remove it from the qcow2 file.
+
+.. admonition:: Example
+
+ Remove a bitmap named ``bitmap0`` from node ``drive0``:
+
+ .. code:: json
+
+  -> { "execute": "block-dirty-bitmap-remove",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap0"
+       }
+     }
+
+  <- { "return": {} }
+
+Resetting: block-dirty-bitmap-clear
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+`block-dirty-bitmap-clear
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002dclear>`_:
+
+Clears all dirty bits from a bitmap. ``+busy`` bitmaps cannot be cleared.
+
+- An incremental backup created from an empty bitmap will copy no data, as if
+  nothing has changed.
+
+.. admonition:: Example
+
+ Clear all dirty bits from bitmap ``bitmap0`` on node ``drive0``:
+
+ .. code:: json
+
+  -> { "execute": "block-dirty-bitmap-clear",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap0"
+       }
+     }
+
+  <- { "return": {} }
+
+Enabling: block-dirty-bitmap-enable
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+`block-dirty-bitmap-enable
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002denable>`_:
+
+"Enables" a bitmap, setting the ``recording`` bit to true, causing writes to
+begin being recorded. ``+busy`` bitmaps cannot be enabled.
+
+- Bitmaps default to being enabled when created, unless configured otherwise.
+
+- Persistent enabled bitmaps will remember their ``+recording`` status on
+  load.
+
+.. admonition:: Example
+
+ To set ``+recording`` on bitmap ``bitmap0`` on node ``drive0``:
+
+ .. code:: json
+
+  -> { "execute": "block-dirty-bitmap-enable",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap0"
+       }
+     }
+
+  <- { "return": {} }
+
+Enabling: block-dirty-bitmap-disable
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+`block-dirty-bitmap-disable
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002ddisable>`_:
+
+"Disables" a bitmap, setting the ``recording`` bit to false, causing further
+writes to begin being ignored. ``+busy`` bitmaps cannot be disabled.
+
+.. warning::
+
+  This is potentially dangerous: QEMU makes no effort to stop any writes if
+  there are disabled bitmaps on a node, and will not mark any disabled bitmaps
+  as ``+inconsistent`` if any such writes do happen. Backups made from such
+  bitmaps will not be able to be used to reconstruct a coherent image.
+
+- Disabling a bitmap may be useful for examining which sectors of a disk
+  changed during a specific time period, or for explicit management of
+  differential backup windows.
+
+- Persistent disabled bitmaps will remember their ``-recording`` status on
+  load.
+
+.. admonition:: Example
+
+ To set ``-recording`` on bitmap ``bitmap0`` on node ``drive0``:
+
+ .. code:: json
+
+  -> { "execute": "block-dirty-bitmap-disable",
+       "arguments": {
+         "node": "drive0",
+         "name": "bitmap0"
+       }
+     }
+
+  <- { "return": {} }
+
+Merging, Copying: block-dirty-bitmap-merge
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+`block-dirty-bitmap-merge
+<qemu-qmp-ref.html#index-block_002ddirty_002dbitmap_002dmerge>`_:
+
+Merges one or more bitmaps into a target bitmap. For any segment that is dirty
+in any one source bitmap, the target bitmap will mark that segment dirty.
+
+- Merge takes one or more bitmaps as a source and merges them together into a
+  single destination, such that any segment marked as dirty in any source
+  bitmap(s) will be marked dirty in the destination bitmap.
+
+- Merge does not create the destination bitmap if it does not exist. A blank
+  bitmap can be created beforehand to achieve the same effect.
+
+- The destination is not cleared prior to merge, so subsequent merge
+  operations will continue to cumulatively mark more segments as dirty.
+
+- If the merge operation should fail, the destination bitmap is guaranteed to
+  be unmodified. The operation may fail if the source or destination bitmaps
+  are busy, or have different granularities.
+
+- Bitmaps can only be merged on the same node. There is only one "node"
+  argument, so all bitmaps must be attached to that same node.
+
+- Copy can be achieved by merging from a single source to an empty
+  destination.
+
+.. admonition:: Example
+
+ Merge the data from ``bitmap0`` into the bitmap ``new_bitmap`` on node
+ ``drive0``. If ``new_bitmap`` was empty prior to this command, this achieves
+ a copy.
+
+ .. code:: json
+
+  -> { "execute": "block-dirty-bitmap-merge",
+       "arguments": {
+         "node": "drive0",
+         "target": "new_bitmap",
+         "bitmaps: [ "bitmap0" ]
+       }
+     }
+
+  <- { "return": {} }
+
+Querying: query-block
+~~~~~~~~~~~~~~~~~~~~~
+
+`query-block
+<qemu-qmp-ref.html#index-query_002dblock>`_:
+
+Not strictly a bitmaps command, but will return information about any bitmaps
+attached to nodes serving as the root for guest devices.
+
+- The "inconsistent" bit will not appear when it is false, appearing only when
+  the value is true to indicate there is a problem.
+
+.. admonition:: Example
+
+ Query the block sub-system of QEMU. The following json has trimmed irrelevant
+ keys from the response to highlight only the bitmap-relevant portions of the
+ API. This result highlights a bitmap ``bitmap0`` attached to the root node of
+ device ``drive0``.
+
+ .. code:: json
+
+  -> {
+       "execute": "query-block",
+       "arguments": {}
+     }
+
+  <- {
+       "return": [ {
+         "dirty-bitmaps": [ {
+           "status": "active",
+           "count": 0,
+           "busy": false,
+           "name": "bitmap0",
+           "persistent": false,
+           "recording": true,
+           "granularity": 65536
+         } ],
+         "device": "drive0",
+       } ]
+     }
+
+Bitmap Persistence
+------------------
+
+As outlined in `Supported Image Formats`_, QEMU can persist bitmaps to qcow2
+files. Demonstrated in `Creation: block-dirty-bitmap-add`_, passing
+``persistent: true`` to ``block-dirty-bitmap-add`` will persist that bitmap to
+disk.
+
+Persistent bitmaps will be automatically loaded into memory upon load, and
+will be written back to disk upon close. Their usage should be mostly
+transparent.
+
+However, if QEMU does not get a chance to close the file cleanly, the bitmap
+will be marked as ``+inconsistent`` at next load and considered unsafe to use
+for any operation. At this point, the only valid operation on such bitmaps is
+``block-dirty-bitmap-remove``.
+
+Losing a bitmap in this way does not invalidate any existing backups that have
+been made from this bitmap, but no further backups will be able to be issued
+for this chain.
 
 Transactions
 ------------
 
+Transactions are a QMP feature that allows you to submit multiple QMP commands
+at once, being guaranteed that they will all succeed or fail atomically,
+together. The interaction of bitmaps and transactions are demonstrated below.
+
+See `transaction <qemu-qmp.ref.html#index-transaction>`_ in the QMP reference
+for more details.
+
 Justification
 ~~~~~~~~~~~~~
 
-Bitmaps can be safely modified when the VM is paused or halted by using
-the basic QMP commands. For instance, you might perform the following
-actions:
+Bitmaps can generally be modified at any time, but certain operations often
+only make sense when paired directly with other commands. When a VM is paused,
+it's easy to ensure that no guest writes occur between individual QMP
+commands. When a VM is running, this is difficult to accomplish with
+individual QMP commands that may allow guest writes to occur inbetween each
+command.
 
-1. Boot the VM in a paused state.
-2. Create a full drive backup of drive0.
-3. Create a new bitmap attached to drive0.
-4. Resume execution of the VM.
-5. Incremental backups are ready to be created.
+For example, using only individual QMP commands, we could:
 
-At this point, the bitmap and drive backup would be correctly in sync,
-and incremental backups made from this point forward would be correctly
-aligned to the full drive backup.
+#. Boot the VM in a paused state.
+#. Create a full drive backup of drive0.
+#. Create a new bitmap attached to drive0, confident that nothing has been
+   written to drive0 in the meantime.
+#. Resume execution of the VM.
+#. At a later point, issue incremental backups from ``bitmap0``.
 
-This is not particularly useful if we decide we want to start
-incremental backups after the VM has been running for a while, for which
-we will need to perform actions such as the following:
+At this point, the bitmap and drive backup would be correctly in sync, and
+incremental backups made from this point forward would be correctly aligned to
+the full drive backup.
 
-1. Boot the VM and begin execution.
-2. Using a single transaction, perform the following operations:
+This is not particularly useful if we decide we want to start incremental
+backups after the VM has been running for a while, for which we would want to
+perform actions such as the following:
+
+#. Boot the VM and begin execution.
+#. Using a single transaction, perform the following operations:
 
    -  Create ``bitmap0``.
    -  Create a full drive backup of ``drive0``.
 
-3. Incremental backups are now ready to be created.
+#. At a later point, issue incremental backups from ``bitmap0``.
+
+.. note:: As a consideration, if ``bitmap0`` is created prior to the full
+          drive backup, incremental backups can still be authored from this
+          bitmap, but they will copy extra segments reflecting writes that
+          occurred prior to the backup operation. Transactions allow us to
+          narrow critical points in time to reduce waste, or, in the other
+          direction, to ensure that no segments are omitted.
 
 Supported Bitmap Transactions
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 -  ``block-dirty-bitmap-add``
 -  ``block-dirty-bitmap-clear``
+-  ``block-dirty-bitmap-enable``
+-  ``block-dirty-bitmap-disable``
+-  ``block-dirty-bitmap-merge``
 
-The usages are identical to their respective QMP commands, but see below
-for examples.
+The usages for these commands are identical to their respective QMP commands,
+but see the sections below for concrete examples.
 
-Example: New Incremental Backup
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Incremental Backups - Push Model
+--------------------------------
 
-As outlined in the justification, perhaps we want to create a new
-incremental backup chain attached to a drive.
+Incremental backups are simply partial disk images that can be combined with
+other partial disk images on top of a base image to reconstruct a full backup
+from the point in time at which the incremental backup was issued.
 
-.. code:: json
+The "Push Model" here references the fact that QEMU is "pushing" the modified
+blocks out to a destination. We will be using the `drive-backup
+<qemu-qmp-ref.html#index-drive_002dbackup>`_ and `blockdev-backup
+<qemu-qmp-ref.html#index-blockdev_002dbackup>`_ QMP commands to create both
+full and incremental backups.
 
-    { "execute": "transaction",
-      "arguments": {
-        "actions": [
-          {"type": "block-dirty-bitmap-add",
-           "data": {"node": "drive0", "name": "bitmap0"} },
-          {"type": "drive-backup",
-           "data": {"device": "drive0", "target": "/path/to/full_backup.img",
-                    "sync": "full", "format": "qcow2"} }
-        ]
-      }
-    }
+Both of these commands are jobs, which have their own QMP API for querying and
+management documented in `Background jobs
+<qemu-qmp-ref.html#Background-jobs>`_.
 
 Example: New Incremental Backup Anchor Point
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Maybe we just want to create a new full backup with an existing bitmap
-and want to reset the bitmap to track the new chain.
+As outlined in the Transactions - `Justification`_ section, perhaps we want to
+create a new incremental backup chain attached to a drive.
+
+This example creates a new, full backup of "drive0" and accompanies it with a
+new, empty bitmap that records writes from this point in time forward.
+
+.. note:: Any new writes that happen after this command is issued, even while
+          the backup job runs, will be written locally and not to the backup
+          destination. These writes will be recorded in the bitmap
+          accordingly.
+
+.. code:: json
+
+  -> {
+       "execute": "transaction",
+       "arguments": {
+         "actions": [
+           {
+             "type": "block-dirty-bitmap-add",
+             "data": {
+               "node": "drive0",
+               "name": "bitmap0"
+             }
+           },
+           {
+             "type": "drive-backup",
+             "data": {
+               "device": "drive0",
+               "target": "/path/to/drive0.full.qcow2",
+               "sync": "full",
+               "format": "qcow2"
+             }
+           }
+         ]
+       }
+     }
+
+  <- { "return": {} }
+
+  <- {
+       "timestamp": {
+         "seconds": 1555436945,
+         "microseconds": 179620
+       },
+       "data": {
+         "status": "created",
+         "id": "drive0"
+       },
+       "event": "JOB_STATUS_CHANGE"
+     }
+
+  ...
+
+  <- {
+       "timestamp": {...},
+       "data": {
+         "device": "drive0",
+         "type": "backup",
+         "speed": 0,
+         "len": 68719476736,
+         "offset": 68719476736
+       },
+       "event": "BLOCK_JOB_COMPLETED"
+     }
+
+  <- {
+       "timestamp": {...},
+       "data": {
+         "status": "concluded",
+         "id": "drive0"
+       },
+       "event": "JOB_STATUS_CHANGE"
+     }
+
+  <- {
+       "timestamp": {...},
+       "data": {
+         "status": "null",
+         "id": "drive0"
+       },
+       "event": "JOB_STATUS_CHANGE"
+     }
+
+A full explanation of the job transition semantics and the JOB_STATUS_CHANGE
+event are beyond the scope of this document and will be omitted in all
+subsequent examples; above, several more events have been omitted for brevity.
+
+.. note:: Subsequent examples will omit all events except BLOCK_JOB_COMPLETED
+          except where necessary to illustrate workflow differences.
+
+          Omitted events and json objects will be represented by ellipses:
+          ``...``
+
+Example: Resetting an Incremental Backup Anchor Point
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If we want to start a new backup chain with an existing bitmap, we can also
+use a transaction to reset the bitmap while making a new full backup:
 
 .. code:: json
 
-    { "execute": "transaction",
-      "arguments": {
-        "actions": [
-          {"type": "block-dirty-bitmap-clear",
-           "data": {"node": "drive0", "name": "bitmap0"} },
-          {"type": "drive-backup",
-           "data": {"device": "drive0", "target": 
"/path/to/new_full_backup.img",
-                    "sync": "full", "format": "qcow2"} }
-        ]
-      }
-    }
-
-Incremental Backups
--------------------
-
-The star of the show.
-
-**Nota Bene!** Only incremental backups of entire drives are supported
-for now. So despite the fact that you can attach a bitmap to any
-arbitrary node, they are only currently useful when attached to the root
-node. This is because drive-backup only supports drives/devices instead
-of arbitrary nodes.
+  -> {
+       "execute": "transaction",
+       "arguments": {
+         "actions": [
+         {
+           "type": "block-dirty-bitmap-clear",
+           "data": {
+             "node": "drive0",
+             "name": "bitmap0"
+           }
+         },
+         {
+           "type": "drive-backup",
+           "data": {
+             "device": "drive0",
+             "target": "/path/to/drive0.new_full.qcow2",
+             "sync": "full",
+             "format": "qcow2"
+           }
+         }
+       ]
+     }
+   }
+
+  <- { "return": {} }
+
+  ...
+
+  <- {
+       "timestamp": {...},
+       "data": {
+         "device": "drive0",
+         "type": "backup",
+         "speed": 0,
+         "len": 68719476736,
+         "offset": 68719476736
+       },
+       "event": "BLOCK_JOB_COMPLETED"
+     }
+
+  ...
+
+The result of this example is identical to the first, but we clear an existing
+bitmap instead of adding a new one.
+
+.. tip:: In both of these examples, "bitmap0" is tied conceptually to the
+         creation of new, full backups. This relationship is not saved or
+         remembered by QEMU; it is up to the operator or management layer to
+         remember which bitmaps are associated with which backups.
 
 Example: First Incremental Backup
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-1. Create a full backup and sync it to the dirty bitmap, as in the
-   transactional examples above; or with the VM offline, manually create
-   a full copy and then create a new bitmap before the VM begins
-   execution.
+#. Create a full backup and sync it to a dirty bitmap using any method:
 
-   -  Let's assume the full backup is named ``full_backup.img``.
-   -  Let's assume the bitmap you created is ``bitmap0`` attached to
-      ``drive0``.
+   - Either of the two live backup method demonstrated above,
+   - Using QMP commands with the VM paused as in the `Justification`_ section,
+     or
+   - With the VM offline, manually copy the image and start the VM in a paused
+     state, careful to add a new bitmap before the VM begins execution.
 
-2. Create a destination image for the incremental backup that utilizes
-   the full backup as a backing image.
+   Whichever method is chosen, let's assume that at the end of this step:
 
-   -  Let's assume the new incremental image is named
-      ``incremental.0.img``.
+   - The full backup is named ``drive0.full.qcow2``.
+   - The bitmap we created is named ``bitmap0``, attached to ``drive0``.
+
+#. Create a destination image for the incremental backup that utilizes the
+   full backup as a backing image.
+
+   - Let's assume the new incremental image is named ``drive0.inc0.qcow2``:
 
    .. code:: bash
 
-       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+       $ qemu-img create -f qcow2 drive0.inc0.qcow2 \
+         -b drive0.full.qcow2 -F qcow2
 
-3. Issue the incremental backup command:
+#. Issue an incremental backup command:
 
    .. code:: json
 
-       { "execute": "drive-backup",
+    -> {
+         "execute": "drive-backup",
          "arguments": {
            "device": "drive0",
            "bitmap": "bitmap0",
-           "target": "incremental.0.img",
+           "target": "drive0.inc0.qcow2",
            "format": "qcow2",
            "sync": "incremental",
            "mode": "existing"
          }
        }
 
+    <- { "return": {} }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+This copies any blocks modified since the full backup was created into the
+``drive0.inc0.qcow2`` file. During the operation, ``bitmap0`` is marked
+``+busy``. If the operation is successful, ``bitmap0`` will be cleared to
+reflect the "incremental" backup regimen, which only copies out new changes
+from each incremental backup.
+
+.. note:: Any new writes that occur after the backup operation starts do not
+          get copied to the destination. The backup's "point in time" is when
+          the backup starts, not when it ends. These writes are recorded in a
+          special bitmap that gets re-added to bitmap0 when the backup ends so
+          that the next incremental backup can copy them out.
+
 Example: Second Incremental Backup
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-1. Create a new destination image for the incremental backup that points
-   to the previous one, e.g.: ``incremental.1.img``
+#. Create a new destination image for the incremental backup that points to
+   the previous one, e.g.: ``drive0.inc1.qcow2``
 
    .. code:: bash
 
-       $ qemu-img create -f qcow2 incremental.1.img -b incremental.0.img -F 
qcow2
+       $ qemu-img create -f qcow2 drive0.inc1.qcow2 \
+         -b drive0.inc0.qcow2 -F qcow2
 
-2. Issue a new incremental backup command. The only difference here is
-   that we have changed the target image below.
+#. Issue a new incremental backup command. The only difference here is that we
+   have changed the target image below.
 
    .. code:: json
 
-       { "execute": "drive-backup",
+    -> {
+         "execute": "drive-backup",
          "arguments": {
            "device": "drive0",
            "bitmap": "bitmap0",
-           "target": "incremental.1.img",
+           "target": "drive0.inc1.qcow2",
            "format": "qcow2",
            "sync": "incremental",
            "mode": "existing"
          }
        }
 
-Errors
-------
+    <- { "return": {} }
 
--  In the event of an error that occurs after a backup job is
-   successfully launched, either by a direct QMP command or a QMP
-   transaction, the user will receive a ``BLOCK_JOB_COMPLETE`` event with
-   a failure message, accompanied by a ``BLOCK_JOB_ERROR`` event.
+    ...
 
--  In the case of an event being cancelled, the user will receive a
-   ``BLOCK_JOB_CANCELLED`` event instead of a pair of COMPLETE and ERROR
-   events.
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+Because the first incremental backup from the previous example completed
+successfully, ``bitmap0`` was synchronized with ``drive0.inc0.qcow2``. Here,
+we use ``bitmap0`` again to create a new incremental backup that targets the
+previous one, creating a chain of three images:
+
+.. admonition:: Diagram
+
+ .. code:: text
 
--  In either case, the incremental backup data contained within the
-   bitmap is safely rolled back, and the data within the bitmap is not
-   lost. The image file created for the failed attempt can be safely
-   deleted.
+   +-------------------+   +-------------------+   +-------------------+
+   | drive0.full.qcow2 |<--| drive0.inc0.qcow2 |<--| drive0.inc1.qcow2 |
+   +-------------------+   +-------------------+   +-------------------+
 
--  Once the underlying problem is fixed (e.g. more storage space is
-   freed up), you can simply retry the incremental backup command with
-   the same bitmap.
+Each new incremental backup re-synchronizes the bitmap to the latest backup
+authored, allowing a user to continue to "consume" it to create new backups on
+top of an existing chain.
 
-Example
-~~~~~~~
+In the above diagram, neither drive0.inc1.qcow2 nor drive0.inc0.qcow2 are
+complete images by themselves, but rely on their backing chain to reconstruct
+a full image. The dependency terminates with each full backup.
 
-1. Create a target image:
+Each backup in this chain remains independent, and is unchanged by new entries
+made later in the chain. For instance, drive0.inc0.qcow2 remains a perfectly
+valid backup of the disk as it was when that backup was issued.
+
+Example: Incremental Push Backups without Backing Files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Backup images are best kept off-site, so we often will not have the preceding
+backups in a chain available to link against. This is not a problem at backup
+time; we simply do not set the backing image when creating the destination
+image:
+
+#. Create a new destination image with no backing file set. We will need to
+   specify the size of the base image this time, because it isn't available
+   for QEMU to use to guess:
 
    .. code:: bash
 
-       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+       $ qemu-img create -f qcow2 drive0.inc2.qcow2 64G
 
-2. Attempt to create an incremental backup via QMP:
+   .. note:: Alternatively, you can omit ``mode: "existing"`` from the push
+             backup commands to have QEMU create an image without a backing
+             file for you, but you lose control over format options like
+             compatibility and preallocation presets.
+
+#. Issue a new incremental backup command. Apart from the new destination
+   image, there is no difference from the last two examples.
 
    .. code:: json
 
-       { "execute": "drive-backup",
+    -> {
+         "execute": "drive-backup",
          "arguments": {
            "device": "drive0",
            "bitmap": "bitmap0",
-           "target": "incremental.0.img",
+           "target": "drive0.inc2.qcow2",
            "format": "qcow2",
            "sync": "incremental",
            "mode": "existing"
          }
        }
 
-3. Receive an event notifying us of failure:
+    <- { "return": {} }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+The only difference from the perspective of the user is that you will need to
+set the backing image when attempting to restore the backup:
+
+.. code:: bash
+
+    $ qemu-img rebase drive0.inc2.qcow2 \
+      -u -b drive0.inc1.qcow2
+
+This uses the "unsafe" rebase mode to simply set the backing file to a file
+that isn't present.
+
+It is also possible to use ``--image-opts`` to specify the entire backing
+chain by hand as an ephemeral property at runtime, but that is beyond the
+scope of this document.
+
+Example: Multi-drive Incremental Backup
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Assume we have a VM with two drives, "drive0" and "drive1" and we wish to back
+both of them up such that the two backups represent the same crash-consistent
+point in time.
+
+#. For each drive, create an empty image:
+
+   .. code:: bash
+
+    $ qemu-img create -f qcow2 drive0.full.qcow2 64G
+    $ qemu-img create -f qcow2 drive1.full.qcow2 64G
+
+#. Create a full (anchor) backup for each drive, with accompanying bitmaps:
+
+   .. code:: json
+
+    -> {
+         "execute": "transaction",
+         "arguments": {
+           "actions": [
+             {
+               "type": "block-dirty-bitmap-add",
+               "data": {
+                 "node": "drive0",
+                 "name": "bitmap0"
+               }
+             },
+             {
+               "type": "block-dirty-bitmap-add",
+               "data": {
+                 "node": "drive1",
+                 "name": "bitmap0"
+               }
+             },
+             {
+               "type": "drive-backup",
+               "data": {
+                 "device": "drive0",
+                 "target": "/path/to/drive0.full.qcow2",
+                 "sync": "full",
+                 "format": "qcow2"
+               }
+             },
+             {
+               "type": "drive-backup",
+               "data": {
+                 "device": "drive1",
+                 "target": "/path/to/drive1.full.qcow2",
+                 "sync": "full",
+                 "format": "qcow2"
+               }
+             }
+           ]
+         }
+       }
+
+    <- { "return": {} }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive1",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+#. Later, create new destination images for each of the incremental backups
+   that point to their respective full backups:
+
+   .. code:: bash
+
+     $ qemu-img create -f qcow2 drive0.inc0.qcow2 \
+       -b drive0.full.qcow2 -F qcow2
+     $ qemu-img create -f qcow2 drive1.inc0.qcow2 \
+       -b drive1.full.qcow2 -F qcow2
+
+#. Issue a multi-drive incremental push backup transaction:
 
    .. code:: json
 
-       { "timestamp": { "seconds": 1424709442, "microseconds": 844524 },
-         "data": { "speed": 0, "offset": 0, "len": 67108864,
-                   "error": "No space left on device",
-                   "device": "drive1", "type": "backup" },
-         "event": "BLOCK_JOB_COMPLETED" }
+    -> {
+         "execute": "transaction",
+         "arguments": {
+           "actions": [
+             {
+               "type": "drive-backup",
+               "data": {
+                 "device": "drive0",
+                 "bitmap": "bitmap0",
+                 "format": "qcow2",
+                 "mode": "existing",
+                 "sync": "incremental",
+                 "target": "drive0.inc0.qcow2"
+               }
+             },
+             {
+               "type": "drive-backup",
+               "data": {
+                 "device": "drive1",
+                 "bitmap": "bitmap0",
+                 "format": "qcow2",
+                 "mode": "existing",
+                 "sync": "incremental",
+                 "target": "drive1.inc0.qcow2"
+               }
+             },
+           ]
+         }
+       }
+
+    <- { "return": {} }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive1",
+           "type": "backup",
+           "speed": 0,
+           "len": 68719476736,
+           "offset": 68719476736
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+    ...
+
+Push Backup Errors & Recovery
+-----------------------------
+
+In the event of an error that occurs after a push backup job is successfully
+launched, either by an individual QMP command or a QMP transaction, the user
+will receive a ``BLOCK_JOB_COMPLETE`` event with a failure message,
+accompanied by a ``BLOCK_JOB_ERROR`` event.
+
+In the case of a job being cancelled, the user will receive a
+``BLOCK_JOB_CANCELLED`` event instead of a pair of COMPLETE and ERROR
+events.
+
+In either failure case, the bitmap used for the failed operation is not
+cleared. It will contain all of the dirty bits it did at the start of the
+operation, plus any new bits that got marked during the operation.
+
+Effectively, the "point in time" that a bitmap is recording differences
+against is kept at the issuance of the last successful incremental backup,
+instead of being moved forward to the start of this now-failed backup.
+
+Once the underlying problem is addressed (e.g. more storage space is allocated
+on the destination), the incremental backup command can be retried with the
+same bitmap.
+
+Example: Individual Failures
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Backup jobs that fail individually behave simply as described above. This
+example shows the simplest case:
+
+#. Create a target image:
+
+   .. code:: bash
+
+       $ qemu-img create -f qcow2 drive0.inc0.qcow2 \
+         -b drive0.full.qcow2 -F qcow2
+
+#. Attempt to create an incremental backup via QMP:
+
+   .. code:: json
+
+    -> {
+         "execute": "drive-backup",
+         "arguments": {
+           "device": "drive0",
+           "bitmap": "bitmap0",
+           "target": "drive0.inc0.qcow2",
+           "format": "qcow2",
+           "sync": "incremental",
+           "mode": "existing"
+         }
+       }
+
+    <- { "return": {} }
+
+#. Receive a pair of events indicating failure:
+
+   .. code:: json
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "action": "report",
+           "operation": "read"
+         },
+         "event": "BLOCK_JOB_ERROR"
+       }
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "speed": 0,
+           "offset": 0,
+           "len": 67108864,
+           "error": "No space left on device",
+           "device": "drive0",
+           "type": "backup"
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
 
-4. Delete the failed incremental, and re-create the image.
+#. Delete the failed image, and re-create it.
 
    .. code:: bash
 
-       $ rm incremental.0.img
-       $ qemu-img create -f qcow2 incremental.0.img -b full_backup.img -F qcow2
+       $ rm drive0.inc0.qcow2
+       $ qemu-img create -f qcow2 drive0.inc0.qcow2 \
+         -b drive0.full.qcow2 -F qcow2
 
-5. Retry the command after fixing the underlying problem, such as
+#. Retry the command after fixing the underlying problem, such as
    freeing up space on the backup volume:
 
    .. code:: json
 
-       { "execute": "drive-backup",
+    -> {
+         "execute": "drive-backup",
          "arguments": {
            "device": "drive0",
            "bitmap": "bitmap0",
-           "target": "incremental.0.img",
+           "target": "drive0.inc0.qcow2",
            "format": "qcow2",
            "sync": "incremental",
            "mode": "existing"
          }
        }
 
-6. Receive confirmation that the job completed successfully:
+    <- { "return": {} }
 
-   .. code:: json
-
-       { "timestamp": { "seconds": 1424709668, "microseconds": 526525 },
-         "data": { "device": "drive1", "type": "backup",
-                   "speed": 0, "len": 67108864, "offset": 67108864},
-         "event": "BLOCK_JOB_COMPLETED" }
-
-Partial Transactional Failures
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
--  Sometimes, a transaction will succeed in launching and return
-   success, but then later the backup jobs themselves may fail. It is
-   possible that a management application may have to deal with a
-   partial backup failure after a successful transaction.
+#. Receive confirmation that the job completed successfully:
 
--  If multiple backup jobs are specified in a single transaction, when
-   one of them fails, it will not interact with the other backup jobs in
-   any way.
-
--  The job(s) that succeeded will clear the dirty bitmap associated with
-   the operation, but the job(s) that failed will not. It is not "safe"
-   to delete any incremental backups that were created successfully in
-   this scenario, even though others failed.
-
-Example
-^^^^^^^
+   .. code:: json
 
--  QMP example highlighting two backup jobs:
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 67108864,
+           "offset": 67108864
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+Example: Partial Transactional Failures
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+QMP commands like `drive-backup <qemu-qmp-ref.html#index-drive_002dbackup>`_
+conceptually only start a job, and so transactions containing these commands
+may succeed even if the job it created later fails. This might have surprising
+interactions with notions of how a "transaction" ought to behave.
+
+This distinction means that on occasion, a transaction containing such job
+launching commands may appear to succeed and return success, but later
+individual jobs associated with the transaction may fail. It is possible that
+a management application may have to deal with a partial backup failure after
+a "successful" transaction.
+
+If multiple backup jobs are specified in a single transaction, if one of those
+jobs fails, it will not interact with the other backup jobs in any way by
+default. The job(s) that succeeded will clear the dirty bitmap associated with
+the operation, but the job(s) that failed will not. It is therefore not safe
+to delete any incremental backups that were created successfully in this
+scenario, even though others failed.
+
+This example illustrates a transaction with two backup jobs, where one fails
+and one succeeds:
+
+#. Issue the transaction to start a backup of both drives. Note that the
+   transaction is accepted, indicating that the jobs are started succesfully.
 
    .. code:: json
 
-       { "execute": "transaction",
+    -> {
+         "execute": "transaction",
          "arguments": {
            "actions": [
-             { "type": "drive-backup",
-               "data": { "device": "drive0", "bitmap": "bitmap0",
-                         "format": "qcow2", "mode": "existing",
-                         "sync": "incremental", "target": "d0-incr-1.qcow2" } 
},
-             { "type": "drive-backup",
-               "data": { "device": "drive1", "bitmap": "bitmap1",
-                         "format": "qcow2", "mode": "existing",
-                         "sync": "incremental", "target": "d1-incr-1.qcow2" } 
},
-           ]
+           {
+             "type": "drive-backup",
+             "data": {
+               "device": "drive0",
+               "bitmap": "bitmap0",
+               "format": "qcow2",
+               "mode": "existing",
+               "sync": "incremental",
+               "target": "drive0.inc0.qcow2"
+             }
+           },
+           {
+             "type": "drive-backup",
+             "data": {
+               "device": "drive1",
+               "bitmap": "bitmap0",
+               "format": "qcow2",
+               "mode": "existing",
+               "sync": "incremental",
+               "target": "drive1.inc0.qcow2"
+             }
+           }]
          }
        }
 
--  QMP example response, highlighting one success and one failure:
+#. Receive notice that the Transaction was accepted, and jobs were
+   launched:
 
-   -  Acknowledgement that the Transaction was accepted and jobs were
-      launched:
+   .. code:: json
+
+    <- { "return": {} }
+
+#. Receive notice that the first job has completed:
 
-      .. code:: json
+   .. code:: json
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 67108864,
+           "offset": 67108864
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
 
-          { "return": {} }
+#. Receive notice that the second job has failed:
 
-   -  Later, QEMU sends notice that the first job was completed:
+   .. code:: json
 
-      .. code:: json
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive1",
+           "action": "report",
+           "operation": "read"
+         },
+         "event": "BLOCK_JOB_ERROR"
+       }
 
-          { "timestamp": { "seconds": 1447192343, "microseconds": 615698 },
-            "data": { "device": "drive0", "type": "backup",
-                       "speed": 0, "len": 67108864, "offset": 67108864 },
-            "event": "BLOCK_JOB_COMPLETED"
-          }
+    ...
 
-   -  Later yet, QEMU sends notice that the second job has failed:
+    <- {
+         "timestamp": {...},
+         "data": {
+           "speed": 0,
+           "offset": 0,
+           "len": 67108864,
+           "error": "Input/output error",
+           "device": "drive1",
+           "type": "backup"
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
 
-      .. code:: json
+At the conclusion of the above example, ``drive0.inc0.qcow2`` is valid and
+must be kept, but ``drive1.inc0.qcow2`` is incomplete and should be
+deleted. If a VM-wide incremental backup of all drives at a point-in-time is
+to be made, new backups for both drives will need to be made, taking into
+account that a new incremental backup for drive0 needs to be based on top of
+``drive0.inc0.qcow2``.
 
-          { "timestamp": { "seconds": 1447192399, "microseconds": 683015 },
-            "data": { "device": "drive1", "action": "report",
-                      "operation": "read" },
-            "event": "BLOCK_JOB_ERROR" }
+In other words, at the conclusion of the above example, we'd have made only an
+incremental backup for drive0 but not drive1. The last VM-wide crash
+consistent backup we have access to in this case is the anchor point.
 
-      .. code:: json
+.. code:: text
 
-          { "timestamp": { "seconds": 1447192399, "microseconds":
-          685853 }, "data": { "speed": 0, "offset": 0, "len": 67108864,
-          "error": "Input/output error", "device": "drive1", "type":
-          "backup" }, "event": "BLOCK_JOB_COMPLETED" }
+          [drive0.full.qcow2] <-- [drive0.inc0.qcow2]
+          [drive1.full.qcow2]
 
--  In the above example, ``d0-incr-1.qcow2`` is valid and must be kept,
-   but ``d1-incr-1.qcow2`` is invalid and should be deleted. If a VM-wide
-   incremental backup of all drives at a point-in-time is to be made,
-   new backups for both drives will need to be made, taking into account
-   that a new incremental backup for drive0 needs to be based on top of
-   ``d0-incr-1.qcow2``.
+To repair this, issue a new incremental backup across both drives. The result
+will be backup chains that resemble the following:
 
-Grouped Completion Mode
-~~~~~~~~~~~~~~~~~~~~~~~
+.. code:: text
 
--  While jobs launched by transactions normally complete or fail on
-   their own, it is possible to instruct them to complete or fail
-   together as a group.
+          [drive0.full.qcow2] <-- [drive0.inc0.qcow2] <-- [drive0.inc1.qcow2]
+          [drive1.full.qcow2] <-------------------------- [drive1.inc1.qcow2]
 
--  QMP transactions take an optional properties structure that can
-   affect the semantics of the transaction.
+Example: Grouped Completion Mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
--  The "completion-mode" transaction property can be either "individual"
-   which is the default, legacy behavior described above, or "grouped,"
-   a new behavior detailed below.
+While jobs launched by transactions normally complete or fail individually,
+it's possible to instruct them to complete or fail together as a group. QMP
+transactions take an optional properties structure that can affect the
+behavior of the transaction.
 
--  Delayed Completion: In grouped completion mode, no jobs will report
-   success until all jobs are ready to report success.
+The ``completion-mode`` transaction property can be either ``individual``
+which is the default legacy behavior described above, or ``grouped``, detailed
+below.
 
--  Grouped failure: If any job fails in grouped completion mode, all
-   remaining jobs will be cancelled. Any incremental backups will
-   restore their dirty bitmap objects as if no backup command was ever
-   issued.
+In ``grouped`` completion mode, no jobs will report success until all jobs are
+ready to report success. If any job fails, all other jobs will be cancelled.
 
-   -  Regardless of if QEMU reports a particular incremental backup job
-      as CANCELLED or as an ERROR, the in-memory bitmap will be
-      restored.
+Regardless of if a participating incremental backup job failed or was
+cancelled, their associated bitmaps will all be held at their existing
+points-in-time, as in individual failure cases.
 
-Example
-^^^^^^^
+Here's the same multi-drive backup scenario from `Example: Partial
+Transactional Failures`_, but with the ``grouped`` completion-mode property
+applied:
 
--  Here's the same example scenario from above with the new property:
+#. Issue the multi-drive incremental backup transaction:
 
    .. code:: json
 
-       { "execute": "transaction",
+    -> {
+         "execute": "transaction",
          "arguments": {
-           "actions": [
-             { "type": "drive-backup",
-               "data": { "device": "drive0", "bitmap": "bitmap0",
-                         "format": "qcow2", "mode": "existing",
-                         "sync": "incremental", "target": "d0-incr-1.qcow2" } 
},
-             { "type": "drive-backup",
-               "data": { "device": "drive1", "bitmap": "bitmap1",
-                         "format": "qcow2", "mode": "existing",
-                         "sync": "incremental", "target": "d1-incr-1.qcow2" } 
},
-           ],
            "properties": {
              "completion-mode": "grouped"
-           }
+           },
+           "actions": [
+           {
+             "type": "drive-backup",
+             "data": {
+               "device": "drive0",
+               "bitmap": "bitmap0",
+               "format": "qcow2",
+               "mode": "existing",
+               "sync": "incremental",
+               "target": "drive0.inc0.qcow2"
+             }
+           },
+           {
+             "type": "drive-backup",
+             "data": {
+               "device": "drive1",
+               "bitmap": "bitmap0",
+               "format": "qcow2",
+               "mode": "existing",
+               "sync": "incremental",
+               "target": "drive1.inc0.qcow2"
+             }
+           }]
          }
        }
 
--  QMP example response, highlighting a failure for ``drive2``:
-
-   -  Acknowledgement that the Transaction was accepted and jobs were
-      launched:
-
-      .. code:: json
-
-          { "return": {} }
-
-   -  Later, QEMU sends notice that the second job has errored out, but
-      that the first job was also cancelled:
-
-      .. code:: json
-
-          { "timestamp": { "seconds": 1447193702, "microseconds": 632377 },
-            "data": { "device": "drive1", "action": "report",
-                      "operation": "read" },
-            "event": "BLOCK_JOB_ERROR" }
-
-      .. code:: json
-
-          { "timestamp": { "seconds": 1447193702, "microseconds": 640074 },
-            "data": { "speed": 0, "offset": 0, "len": 67108864,
-                      "error": "Input/output error",
-                      "device": "drive1", "type": "backup" },
-            "event": "BLOCK_JOB_COMPLETED" }
-
-      .. code:: json
-
-          { "timestamp": { "seconds": 1447193702, "microseconds": 640163 },
-            "data": { "device": "drive0", "type": "backup", "speed": 0,
-                      "len": 67108864, "offset": 16777216 },
-            "event": "BLOCK_JOB_CANCELLED" }
+#. Receive notice that the Transaction was accepted, and jobs were launched:
+
+   .. code:: json
+
+    <- { "return": {} }
+
+#. Receive notification that the backup job for ``drive1`` has failed:
+
+   .. code:: json
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "device": "drive1",
+           "action": "report",
+           "operation": "read"
+         },
+         "event": "BLOCK_JOB_ERROR"
+       }
+
+    <- {
+         "timestamp": {...},
+         "data": {
+           "speed": 0,
+           "offset": 0,
+           "len": 67108864,
+           "error": "Input/output error",
+           "device": "drive1",
+           "type": "backup"
+         },
+         "event": "BLOCK_JOB_COMPLETED"
+       }
+
+#. Receive notification that the job for ``drive0`` has been cancelled:
+
+   .. code:: json
+
+    <- {
+         "timestamp": {...}
+         "data": {
+           "device": "drive0",
+           "type": "backup",
+           "speed": 0,
+           "len": 67108864,
+           "offset": 16777216
+         },
+         "event": "BLOCK_JOB_CANCELLED"
+       }
+
+At the conclusion of *this* example, both jobs have been aborted due to a
+failure. Both destination images should be deleted and are no longer of use.
+
+The transaction as a whole can simply be re-issued at a later time.
 
 .. raw:: html
 
    <!--
    The FreeBSD Documentation License
 
-   Redistribution and use in source (Markdown) and 'compiled' forms (SGML, 
HTML,
-   PDF, PostScript, RTF and so forth) with or without modification, are 
permitted
-   provided that the following conditions are met:
+   Redistribution and use in source (ReST) and 'compiled' forms (SGML, HTML,
+   PDF, PostScript, RTF and so forth) with or without modification, are
+   permitted provided that the following conditions are met:
 
-   Redistributions of source code (Markdown) must retain the above copyright
-   notice, this list of conditions and the following disclaimer of this file
-   unmodified.
+   Redistributions of source code (ReST) must retain the above copyright 
notice,
+   this list of conditions and the following disclaimer of this file 
unmodified.
 
-   Redistributions in compiled form (transformed to other DTDs, converted to 
PDF,
-   PostScript, RTF and other formats) must reproduce the above copyright 
notice,
-   this list of conditions and the following disclaimer in the documentation 
and/or
-   other materials provided with the distribution.
+   Redistributions in compiled form (transformed to other DTDs, converted to
+   PDF, PostScript, RTF and other formats) must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
 
-   THIS DOCUMENTATION IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
"AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  PURPOSE 
ARE
-   DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS  BE 
LIABLE
-   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-   CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
LIABILITY,
-   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
USE OF
-   THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+   THIS DOCUMENTATION IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+   IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF
+   THE POSSIBILITY OF SUCH DAMAGE.
    -->
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]