[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 1/1] target/riscv: Add RVV registers to log
From: |
Ivan Klokov |
Subject: |
[PATCH v5 1/1] target/riscv: Add RVV registers to log |
Date: |
Thu, 29 Jun 2023 11:37:30 +0300 |
Print RvV extension register to log if VPU option is enabled.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
---
v5:
- Fix typo, move macros out of function, direct access to cfg.vlen field.
---
target/riscv/cpu.c | 57 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 56 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 881bddf393..ff29573b1f 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -55,6 +55,17 @@ struct isa_ext_data {
#define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \
{#_name, _min_ver, offsetof(struct RISCVCPUConfig, _prop)}
+/*
+ * From vector_helper.c
+ * Note that vector data is stored in host-endian 64-bit chunks,
+ * so addressing bytes needs a host-endian fixup.
+ */
+#if HOST_BIG_ENDIAN
+#define BYTE(x) ((x) ^ 7)
+#else
+#define BYTE(x) (x)
+#endif
+
/*
* Here are the ordering rules of extension naming defined by RISC-V
* specification :
@@ -183,6 +194,14 @@ const char * const riscv_fpr_regnames[] = {
"f30/ft10", "f31/ft11"
};
+const char * const riscv_rvv_regnames[] = {
+ "v0", "v1", "v2", "v3", "v4", "v5", "v6",
+ "v7", "v8", "v9", "v10", "v11", "v12", "v13",
+ "v14", "v15", "v16", "v17", "v18", "v19", "v20",
+ "v21", "v22", "v23", "v24", "v25", "v26", "v27",
+ "v28", "v29", "v30", "v31"
+};
+
static const char * const riscv_excp_names[] = {
"misaligned_fetch",
"fault_fetch",
@@ -608,7 +627,8 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int
flags)
{
RISCVCPU *cpu = RISCV_CPU(cs);
CPURISCVState *env = &cpu->env;
- int i;
+ int i, j;
+ uint8_t *p;
#if !defined(CONFIG_USER_ONLY)
if (riscv_has_ext(env, RVH)) {
@@ -692,6 +712,41 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f,
int flags)
}
}
}
+ if (riscv_has_ext(env, RVV) && (flags & CPU_DUMP_VPU)) {
+ static const int dump_rvv_csrs[] = {
+ CSR_VSTART,
+ CSR_VXSAT,
+ CSR_VXRM,
+ CSR_VCSR,
+ CSR_VL,
+ CSR_VTYPE,
+ CSR_VLENB,
+ };
+ for (int i = 0; i < ARRAY_SIZE(dump_rvv_csrs); ++i) {
+ int csrno = dump_rvv_csrs[i];
+ target_ulong val = 0;
+ RISCVException res = riscv_csrrw_debug(env, csrno, &val, 0, 0);
+
+ /*
+ * Rely on the smode, hmode, etc, predicates within csr.c
+ * to do the filtering of the registers that are present.
+ */
+ if (res == RISCV_EXCP_NONE) {
+ qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n",
+ csr_ops[csrno].name, val);
+ }
+ }
+ uint16_t vlenb = cpu->cfg.vlen >> 3;
+
+ for (i = 0; i < 32; i++) {
+ qemu_fprintf(f, " %-8s ", riscv_rvv_regnames[i]);
+ p = (uint8_t *)env->vreg;
+ for (j = vlenb - 1 ; j >= 0; j--) {
+ qemu_fprintf(f, "%02x", *(p + i * vlenb + BYTE(j)));
+ }
+ qemu_fprintf(f, "\n");
+ }
+ }
}
static void riscv_cpu_set_pc(CPUState *cs, vaddr value)
--
2.34.1
- [PATCH v5 1/1] target/riscv: Add RVV registers to log,
Ivan Klokov <=