[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL 4/6] seabios: update binaries to git snapshot
|
From: |
Claudio Fontana |
|
Subject: |
Re: [PULL 4/6] seabios: update binaries to git snapshot |
|
Date: |
Tue, 7 Nov 2023 11:48:31 +0100 |
|
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.4.0 |
On 11/7/23 11:35, Gerd Hoffmann wrote:
> Hi,
>
>> Trying to install a simple centos7 iso for testing as in:
>>
>> IMAGESDIR=/images
>> ISO=${IMAGESDIR}/CentOS-7-x86_64-Minimal-2009.iso
>
> Oh, you are running a software museum ;)
>
>> ================================================================================
>> Probing storage...
>> Installation Destination
>
> If you came that far the linux kernel has been booted.
> Do you have a kernel log for me?
>
> Also, what does "lscpu | grep -i address" print (on the host)?
>
> take care,
> Gerd
>
Hi, thanks for the response,
just to be sure, this is a regression (it worked fine prior to the seabios
update).
====
Host lscpu:
====
# lscpu | grep -i address
Address sizes: 43 bits physical, 48 bits virtual
====
Full guest log:
====
Formatting '/gehc/centos7.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off
compression_type=zlib size=32212254720 lazy_refcounts=off refcount_bits=16
Starting install...
Retrieving 'vmlinuz'
| 0 B 00:00:00 ...
Retrieving 'initrd.img'
| 0 B 00:00:00 ...
Creating domain...
| 0 B 00:00:00
Running text console command: virsh --connect qemu:///system console centos7
Connected to domain 'centos7'
Escape character is ^] (Ctrl + ])
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-1160.el7.x86_64
(mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat
4.8.5-44) (GCC) ) #1 SMP Mon Oct 19 16:18:59 UTC 2020
[ 0.000000] Command line: console=ttyS0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffdc000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-14-g1e1da7a96300-prebuilt.qemu.org 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
[ 0.000000] e820: last_pfn = 0x7ffdc max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5460-0x000f546f] mapped at
[ffffffffff200460]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x7cb3c000-0x7ffcffff]
[ 0.000000] Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 00000000000f5420 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000007ffe28c6 00034 (v01 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACP 000000007ffe26ee 000F4 (v03 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000007ffdfcc0 02A2E (v01 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACS 000000007ffdfc80 00040
[ 0.000000] ACPI: APIC 000000007ffe27e2 00080 (v03 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] ACPI: MCFG 000000007ffe2862 0003C (v01 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] ACPI: WAET 000000007ffe289e 00028 (v01 BOCHS BXPC 00000001
BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000207fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd9000-0x207fffffff]
[ 0.000000] kvm-clock: cpu 0, msr 20:7ff88001, primary cpu clock
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 377492173 cycles
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x207fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffdbfff]
[ 0.000000] node 0: [mem 0x100000000-0x207fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x207fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ffdc000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] Detected CPU family 19h model 1
[ 0.000000] Warning: AMD Processor - this hardware has not undergone
upstream testing. Please consult http://wiki.centos.org/FAQ for more information
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u1048576
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 207fc1c040
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 33029989
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: xstate_offset[3]: 0000, xstate_sizes[3]: 0000
[ 0.000000] x86/fpu: xstate_offset[4]: 0000, xstate_sizes[4]: 0000
[ 0.000000] x86/fpu: xstate_offset[5]: 0000, xstate_sizes[5]: 0000
[ 0.000000] x86/fpu: xstate_offset[6]: 0000, xstate_sizes[6]: 0000
[ 0.000000] x86/fpu: xstate_offset[7]: 0000, xstate_sizes[7]: 0000
[ 0.000000] x86/fpu: xstate_offset[8]: 0000, xstate_sizes[8]: 0000
[ 0.000000] x86/fpu: xstate_offset[9]: 0980, xstate_sizes[9]: 0008
[ 0.000000] xsave: enabled xstate_bv 0x207, cntxt size 0x988 using standard
form
[ 0.000000] Memory: 4074276k/136314880k available (7788k kernel code,
2097688k absent, 2237188k reserved, 5954k data, 1984k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:327936 nr_irqs:440 0
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 3489660928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] tsc: Detected 2794.750 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003000] Calibrating delay loop (skipped) preset value.. 5589.50 BogoMIPS
(lpj=2794750)
[ 0.004004] pid_max: default: 32768 minimum: 301
[ 0.004751] Security Framework initialized
[ 0.005007] SELinux: Initializing.
[ 0.006009] Yama: becoming mindful.
[ 0.011533] Dentry cache hash table entries: 16777216 (order: 15, 134217728
bytes)
[ 0.025609] Inode-cache hash table entries: 8388608 (order: 14, 67108864
bytes)
[ 0.032063] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.033077] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.034399] Initializing cgroup subsys memory
[ 0.035006] Initializing cgroup subsys devices
[ 0.036004] Initializing cgroup subsys freezer
[ 0.036708] Initializing cgroup subsys net_cls
[ 0.037003] Initializing cgroup subsys blkio
[ 0.038003] Initializing cgroup subsys perf_event
[ 0.039004] Initializing cgroup subsys hugetlb
[ 0.039709] Initializing cgroup subsys pids
[ 0.040003] Initializing cgroup subsys net_prio
[ 0.041138] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.042305] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
[ 0.043003] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127
[ 0.044003] tlb_flushall_shift: 6
[ 0.045069] FEATURE SPEC_CTRL Present
[ 0.045655] FEATURE IBPB_SUPPORT Present
[ 0.046003] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers
and __user pointer sanitization
[ 0.047003] Spectre V2 : Enabling Indirect Branch Prediction Barrier
[ 0.049202] Spectre V2 : Mitigation: Full retpoline
[ 0.050026] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl and seccomp
[ 0.055088] Freeing SMP alternatives: 28k freed
[ 0.067731] ACPI: Core revision 20130517
[ 0.068508] ACPI: All ACPI Tables successfully acquired
[ 0.069605] ftrace: allocating 29651 entries in 116 pages
[ 0.083305] Enabling x2apic
[ 0.083778] Enabled x2apic
[ 0.084004] Switched APIC routing to physical x2apic.
[ 0.087293] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088001] smpboot: CPU0: AMD EPYC 7543 32-Core Processor (fam: 19, model:
01, stepping: 01)
[ 0.089571] Performance Events:
[ 0.090000] core perfctr but no constraints; unknown hardware!
[ 0.090005] no PMU driver, software events only.
[ 0.090724] KVM setup paravirtual spinlock
[ 0.091943] smpboot: Booting Node 0, Processors #1 OK
[ 0.091881] kvm-clock: cpu 1, msr 20:7ff88041, secondary cpu clock
[ 0.091881] smpboot: CPU 1 Converting physical 0 to logical die 1
[ 0.095247] Brought up 2 CPUs
[ 0.095226] KVM setup async PF for cpu 1
[ 0.095226] kvm-stealtime: cpu 1, msr 207fd1c040
[ 0.096713] smpboot: Max logical packages: 2
[ 0.097004] smpboot: Total of 2 processors activated (11179.00 BogoMIPS)
[ 0.455470] node 0 initialised, 31419376 pages in 357ms
[ 0.456115] devtmpfs: initialized
[ 0.457048] x86/mm: Memory block size: 2048MB
[ 0.458692] EVM: security.selinux
[ 0.459005] EVM: security.ima
[ 0.459465] EVM: security.capability
[ 0.460745] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.461012] pinctrl core: initialized pinctrl subsystem
[ 0.461944] RTC time: 10:38:44, date: 11/07/23
[ 0.462060] NET: Registered protocol family 16
[ 0.462822] cpuidle: using governor haltpoll
[ 0.464008] ACPI: bus type PCI registered
[ 0.464638] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.465121] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.466005] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.467009] PCI: Using configuration type 1 for base access
[ 0.471067] ACPI: Added _OSI(Module Device)
[ 0.472011] ACPI: Added _OSI(Processor Device)
[ 0.472681] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.473004] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.473829] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.476075] ACPI: Interpreter enabled
[ 0.476652] ACPI: (supports S0 S5)
[ 0.477005] ACPI: Using IOAPIC for interrupt routing
[ 0.477781] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.478055] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.480222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.481008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.482054] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.483041] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER
PCIeCapability]
[ 0.484251] PCI host bridge to bus 0000:00
[ 0.484883] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.485007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.486004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.487004] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff
window]
[ 0.488003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff
window]
[ 0.489004] pci_bus 0000:00: root bus resource [mem
0xe00000000000-0xe1bfffffffff window]
[ 0.490005] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.610897] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6
ACPI/GPIO/TCO
[ 0.637226] acpiphp: Slot [0] registered
[ 0.652719] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.653235] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.656194] acpiphp: Slot [0-2] registered
[ 0.664447] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.665231] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.668174] acpiphp: Slot [0-3] registered
[ 0.683717] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.2 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.684229] pci 0000:00:01.2: PCI bridge to [bus 03]
[ 0.686221] acpiphp: Slot [0-4] registered
[ 0.702360] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.3 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.703231] pci 0000:00:01.3: PCI bridge to [bus 04]
[ 0.706164] acpiphp: Slot [0-5] registered
[ 0.714690] pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.4 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.715229] pci 0000:00:01.4: PCI bridge to [bus 05]
[ 0.718162] acpiphp: Slot [0-6] registered
[ 0.731709] pci 0000:06:00.0: 2.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s x1 link at 0000:00:01.5 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.732230] pci 0000:00:01.5: PCI bridge to [bus 06]
[ 0.735143] acpiphp: Slot [0-7] registered
[ 0.735791] pci 0000:00:01.6: PCI bridge to [bus 07]
[ 0.737206] acpiphp: Slot [0-8] registered
[ 0.737854] pci 0000:00:01.7: PCI bridge to [bus 08]
[ 0.740095] acpiphp: Slot [0-9] registered
[ 0.740746] pci 0000:00:02.0: PCI bridge to [bus 09]
[ 0.742200] acpiphp: Slot [0-10] registered
[ 0.742869] pci 0000:00:02.1: PCI bridge to [bus 0a]
[ 0.744200] acpiphp: Slot [0-11] registered
[ 0.744861] pci 0000:00:02.2: PCI bridge to [bus 0b]
[ 0.748202] acpiphp: Slot [0-12] registered
[ 0.748864] pci 0000:00:02.3: PCI bridge to [bus 0c]
[ 0.750198] acpiphp: Slot [0-13] registered
[ 0.750867] pci 0000:00:02.4: PCI bridge to [bus 0d]
[ 0.752203] acpiphp: Slot [0-14] registered
[ 0.752870] pci 0000:00:02.5: PCI bridge to [bus 0e]
[ 0.771019] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.772034] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.773042] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.774073] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.775490] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.776310] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.777310] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.778309] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
[ 0.779279] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.780082] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.780925] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.781149] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.781994] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.782149] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.783005] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.783851] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.784328] vgaarb: loaded
[ 0.784826] SCSI subsystem initialized
[ 0.785033] ACPI: bus type USB registered
[ 0.785683] usbcore: registered new interface driver usbfs
[ 0.786011] usbcore: registered new interface driver hub
[ 0.786850] usbcore: registered new device driver usb
[ 0.787066] EDAC MC: Ver: 3.0.0
[ 0.788151] PCI: Using ACPI for IRQ routing
[ 0.853280] NetLabel: Initializing
[ 0.853815] NetLabel: domain hash size = 128
[ 0.854006] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.854780] NetLabel: unlabeled traffic allowed by default
[ 0.855048] amd_nb: Cannot enumerate AMD northbridges
[ 0.855857] Switched to clocksource kvm-clock
[ 0.858792] pnp: PnP ACPI init
[ 0.859292] ACPI: bus type PNP registered
[ 0.860101] system 00:04: [mem 0xb0000000-0xbfffffff window] has been
reserved
[ 0.861357] pnp: PnP ACPI: found 5 devices
[ 0.862015] ACPI: bus type PNP unregistered
[ 0.868054] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.868994] pci 0000:00:01.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.869946] pci 0000:00:01.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.870904] pci 0000:00:01.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.871865] pci 0000:00:01.4: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.872825] pci 0000:00:01.5: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.873792] pci 0000:00:01.6: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.874751] pci 0000:00:01.7: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.875710] pci 0000:00:02.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.876667] pci 0000:00:02.1: BAR 13: assigned [io 0xa000-0xafff]
[ 0.877625] pci 0000:00:02.2: BAR 13: assigned [io 0xb000-0xbfff]
[ 0.878594] pci 0000:00:02.3: BAR 13: assigned [io 0xd000-0xdfff]
[ 0.879554] pci 0000:00:02.4: BAR 13: assigned [io 0xe000-0xefff]
[ 0.880511] pci 0000:00:02.5: BAR 13: assigned [io 0xf000-0xffff]
[ 0.881472] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.882262] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.886991] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.890308] pci 0000:00:01.0: bridge window [mem
0xe1a000000000-0xe1bfffffffff 64bit pref]
[ 0.896063] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.896830] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff]
[ 0.901169] pci 0000:00:01.1: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.904952] pci 0000:00:01.1: bridge window [mem
0xe18000000000-0xe19fffffffff 64bit pref]
[ 0.911449] pci 0000:00:01.2: PCI bridge to [bus 03]
[ 0.912226] pci 0000:00:01.2: bridge window [io 0x3000-0x3fff]
[ 0.916035] pci 0000:00:01.2: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.921135] pci 0000:00:01.2: bridge window [mem
0xe16000000000-0xe17fffffffff 64bit pref]
[ 0.925990] pci 0000:00:01.3: PCI bridge to [bus 04]
[ 0.926776] pci 0000:00:01.3: bridge window [io 0x4000-0x4fff]
[ 0.930542] pci 0000:00:01.3: bridge window [mem 0xfe200000-0xfe3fffff]
[ 0.933661] pci 0000:00:01.3: bridge window [mem
0xe14000000000-0xe15fffffffff 64bit pref]
[ 0.939421] pci 0000:00:01.4: PCI bridge to [bus 05]
[ 0.941987] pci 0000:00:01.4: bridge window [io 0x5000-0x5fff]
[ 0.945840] pci 0000:00:01.4: bridge window [mem 0xfe000000-0xfe1fffff]
[ 0.948686] pci 0000:00:01.4: bridge window [mem
0xe12000000000-0xe13fffffffff 64bit pref]
[ 0.956345] pci 0000:00:01.5: PCI bridge to [bus 06]
[ 0.957118] pci 0000:00:01.5: bridge window [io 0x6000-0x6fff]
[ 0.960734] pci 0000:00:01.5: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.963547] pci 0000:00:01.5: bridge window [mem
0xe10000000000-0xe11fffffffff 64bit pref]
[ 0.970183] pci 0000:00:01.6: PCI bridge to [bus 07]
[ 0.970955] pci 0000:00:01.6: bridge window [io 0x7000-0x7fff]
[ 0.974541] pci 0000:00:01.6: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.977405] pci 0000:00:01.6: bridge window [mem
0xe0e000000000-0xe0ffffffffff 64bit pref]
[ 0.982580] pci 0000:00:01.7: PCI bridge to [bus 08]
[ 0.983361] pci 0000:00:01.7: bridge window [io 0x8000-0x8fff]
[ 0.989589] pci 0000:00:01.7: bridge window [mem 0xfda00000-0xfdbfffff]
[ 0.992463] pci 0000:00:01.7: bridge window [mem
0xe0c000000000-0xe0dfffffffff 64bit pref]
[ 0.997289] pci 0000:00:02.0: PCI bridge to [bus 09]
[ 1.000038] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 1.004562] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 1.007359] pci 0000:00:02.0: bridge window [mem
0xe0a000000000-0xe0bfffffffff 64bit pref]
[ 1.012242] pci 0000:00:02.1: PCI bridge to [bus 0a]
[ 1.013015] pci 0000:00:02.1: bridge window [io 0xa000-0xafff]
[ 1.016699] pci 0000:00:02.1: bridge window [mem 0xfd600000-0xfd7fffff]
[ 1.019550] pci 0000:00:02.1: bridge window [mem
0xe08000000000-0xe09fffffffff 64bit pref]
[ 1.027379] pci 0000:00:02.2: PCI bridge to [bus 0b]
[ 1.028149] pci 0000:00:02.2: bridge window [io 0xb000-0xbfff]
[ 1.031744] pci 0000:00:02.2: bridge window [mem 0xfd400000-0xfd5fffff]
[ 1.037440] pci 0000:00:02.2: bridge window [mem
0xe06000000000-0xe07fffffffff 64bit pref]
[ 1.042387] pci 0000:00:02.3: PCI bridge to [bus 0c]
[ 1.043167] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 1.046843] pci 0000:00:02.3: bridge window [mem 0xfd200000-0xfd3fffff]
[ 1.049699] pci 0000:00:02.3: bridge window [mem
0xe04000000000-0xe05fffffffff 64bit pref]
[ 1.054743] pci 0000:00:02.4: PCI bridge to [bus 0d]
[ 1.057677] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 1.061944] pci 0000:00:02.4: bridge window [mem 0xfd000000-0xfd1fffff]
[ 1.064754] pci 0000:00:02.4: bridge window [mem
0xe02000000000-0xe03fffffffff 64bit pref]
[ 1.072233] pci 0000:00:02.5: PCI bridge to [bus 0e]
[ 1.073012] pci 0000:00:02.5: bridge window [io 0xf000-0xffff]
[ 1.076672] pci 0000:00:02.5: bridge window [mem 0xfce00000-0xfcffffff]
[ 1.079559] pci 0000:00:02.5: bridge window [mem
0xe00000000000-0xe01fffffffff 64bit pref]
[ 1.084407] NET: Registered protocol family 2
[ 1.085416] TCP established hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.087972] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.091102] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.092143] TCP: reno registered
[ 1.092727] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.094798] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
[ 1.096885] NET: Registered protocol family 1
[ 1.097935] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21
[ 1.102290] Unpacking initramfs...
[ 4.224046] Freeing initrd memory: 53840k freed
[ 4.229058] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.230085] software IO TLB [mem 0x78b3c000-0x7cb3c000] (64MB) mapped at
[ffffa09238b3c000-ffffa0923cb3bfff]
[ 4.232037] sha1_ssse3: Using SHA-NI optimized SHA-1 implementation
[ 4.233105] sha256_ssse3: Using SHA-256-NI optimized SHA-256 implementation
[ 4.234486] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 4.235467] Initialise system trusted keyring
[ 4.236177] audit: initializing netlink socket (disabled)
[ 4.237038] type=2000 audit(1699353527.573:1): initialized
[ 4.255668] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 4.256661] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.258552] zpool: loaded
[ 4.258977] zbud: loaded
[ 4.259566] VFS: Disk quotas dquot_6.5.2
[ 4.260216] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.261355] Key type big_key registered
[ 4.262940] NET: Registered protocol family 38
[ 4.263660] Key type asymmetric registered
[ 4.264314] Asymmetric key parser 'x509' registered
[ 4.265107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 4.266326] io scheduler noop registered
[ 4.266944] io scheduler deadline registered (default)
[ 4.267776] io scheduler cfq registered
[ 4.268393] io scheduler mq-deadline registered
[ 4.269112] io scheduler kyber registered
[ 4.300099] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 4.328544] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 4.329618] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 4.330715] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 4.331803] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 4.332875] pcieport 0000:00:01.2: Signaling PME through PCIe PME interrupt
[ 4.333973] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 4.335057] pcieport 0000:00:01.3: Signaling PME through PCIe PME interrupt
[ 4.336144] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 4.337217] pcieport 0000:00:01.4: Signaling PME through PCIe PME interrupt
[ 4.338338] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 4.339417] pcieport 0000:00:01.5: Signaling PME through PCIe PME interrupt
[ 4.340504] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 4.341579] pcieport 0000:00:01.6: Signaling PME through PCIe PME interrupt
[ 4.342733] pcieport 0000:00:01.7: Signaling PME through PCIe PME interrupt
[ 4.343877] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 4.345026] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
[ 4.346178] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[ 4.347318] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[ 4.348459] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[ 4.349597] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt
[ 4.350726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.351605] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.352646] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.353801] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.354961] ACPI: Power Button [PWRF]
[ 4.355664] GHES: HEST is not enabled!
[ 4.356346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.382645] 00:00: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.383790] Non-volatile memory driver v1.3
[ 4.384475] Linux agpgart interface v0.103
[ 4.385225] crash memory driver: version 1.1
[ 4.385934] rdac: device handler registered
[ 4.386646] hp_sw: device handler registered
[ 4.387323] emc: device handler registered
[ 4.388020] alua: device handler registered
[ 4.388723] libphy: Fixed MDIO Bus: probed
[ 4.389399] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.390567] ehci-pci: EHCI PCI platform driver
[ 4.391443] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.392458] ohci-pci: OHCI PCI platform driver
[ 4.393157] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.395845] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.396687] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 1
[ 4.398139] xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100
quirks 0x0000000000000010
[ 4.400144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 3.10
[ 4.401418] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.402551] usb usb1: Product: xHCI Host Controller
[ 4.403310] usb usb1: Manufacturer: Linux 3.10.0-1160.el7.x86_64 xhci-hcd
[ 4.404357] usb usb1: SerialNumber: 0000:02:00.0
[ 4.405142] hub 1-0:1.0: USB hub found
[ 4.405833] hub 1-0:1.0: 15 ports detected
[ 4.407036] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 4.407863] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 2
[ 4.409011] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 4.410040] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 4.411298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 3.10
[ 4.412577] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.413690] usb usb2: Product: xHCI Host Controller
[ 4.414471] usb usb2: Manufacturer: Linux 3.10.0-1160.el7.x86_64 xhci-hcd
[ 4.415517] usb usb2: SerialNumber: 0000:02:00.0
[ 4.416289] hub 2-0:1.0: USB hub found
[ 4.416954] hub 2-0:1.0: 15 ports detected
[ 4.418176] usbcore: registered new interface driver usbserial_generic
[ 4.419197] usbserial: USB Serial support registered for generic
[ 4.420156] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 4.422171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.422940] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.423787] mousedev: PS/2 mouse device common for all mice
[ 4.424988] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 4.426560] rtc_cmos 00:03: RTC can wake from S4
[ 4.427462] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input2
[ 4.427927] input: VirtualPS/2 VMware VMMouse as
/devices/platform/i8042/serio1/input/input3
[ 4.430828] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.431907] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram
[ 4.433575] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.434552] usbcore: registered new interface driver usbhid
[ 4.435430] usbhid: USB HID core driver
[ 4.436127] drop_monitor: Initializing network drop monitor service
[ 4.437184] TCP: cubic registered
[ 4.437701] Initializing XFRM netlink socket
[ 4.438460] NET: Registered protocol family 10
[ 4.439330] NET: Registered protocol family 17
[ 4.440059] mpls_gso: MPLS GSO support
[ 4.440780] mce: Using 10 MCE banks
[ 4.441525] Loading compiled-in X.509 certificates
[ 4.442343] Loaded X.509 cert 'CentOS Linux kpatch signing key:
ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 4.443828] Loaded X.509 cert 'CentOS Linux Driver update signing key:
7f421ee0ab69461574bb358861dbe77762a4201b'
[ 4.445670] Loaded X.509 cert 'CentOS Linux kernel signing key:
e1fdb0e2a7e861a1d1ca80a23dcf0dba3aa4adf5'
[ 4.447275] registered taskstats version 1
[ 4.447943] page_owner is disabled
[ 4.450511] Key type trusted registered
[ 4.453048] Key type encrypted registered
[ 4.453687] IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.455527] BERT: Boot Error Record Table support is disabled. Enable it by
using bert_enable as kernel parameter.
[ 4.457211] Magic number: 15:197:628
[ 4.457834] pci_bus 0000:0a: hash matches
[ 4.458564] rtc_cmos 00:03: setting system clock to 2023-11-07 10:38:48 UTC
(1699353528)
[ 4.460614] Freeing unused kernel memory: 1984k freed
[ 4.461708] Write protecting the kernel read-only data: 12288k
[ 4.463097] Freeing unused kernel memory: 392k freed
[ 4.464403] Freeing unused kernel memory: 536k freed
[ 4.467615] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.469188] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.470276] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.472377] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT
+SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.475159] systemd[1]: Detected virtualization kvm.
[ 4.475928] systemd[1]: Detected architecture x86-64.
[ 4.476715] systemd[1]: Running in initial RAM disk.
Welcome to CentOS Linux 7 (Core) dracut-033-572.el7 (Initramfs)!
[ 4.478897] systemd[1]: No hostname configured.
[ 4.479622] systemd[1]: Set hostname to <localhost>.
[ 4.480456] systemd[1]: Initializing machine ID from KVM UUID.
[ 4.484288] random: systemd-cryptse: uninitialized urandom read (16 bytes
read)
[ 4.497437] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.498506] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.499542] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.500591] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.502054] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.503162] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.506905] systemd[1]: Cannot add dependency job for unit
blk-availability.service, ignoring: Unit not found.
[ 4.508598] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.510300] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 4.512408] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 4.514409] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 4.516187] systemd[1]: Created slice Root Slice.
[ OK ] Created slice Root Slice.
[ 4.518382] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 4.520179] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 4.521881] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 4.523816] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 4.525821] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 4.528039] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 4.530616] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 4.533926] systemd[1]: Starting dracut cmdline hook...
Starting dracut cmdline hook...
[ 4.536081] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.538109] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 4.540213] systemd[1]: Started Setup Virtual Console.
[ OK ] Started Setup Virtual Console.
[ 4.542826] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 4.545904] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 4.548485] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 4.559568] systemd[1]: Started Create Static Device Nodes in /dev.
[ OK ] Started Create Static Device Nodes in /dev.[ 4.561633] random: fast
init done
[ 4.589962] systemd[1]: Started Journal Service.
[ 4.590780] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ OK ] Started Journal Service.
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ 4.772669] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.783494] Loading iSCSI transport class v2.0-870.
[ 4.789659] iscsi: registered transport (tcp)
[ 7.816227] floppy0: no floppy controllers found
[ 7.817428] work still pending
[ 7.823441] dracut-pre-udev[334]: modprobe: ERROR: could not insert
'floppy': No such device
[ 7.837039] No iBFT detected.
[ 7.859150] async_tx: api initialized (async)
[ 7.860810] xor: automatically using best checksumming function:
[ 7.871007] avx : 15920.000 MB/sec
[ 7.896017] raid6: sse2x1 gen() 5777 MB/s
[ 7.913005] raid6: sse2x2 gen() 11308 MB/s
[ 7.930008] raid6: sse2x4 gen() 18390 MB/s
[ 7.947012] raid6: avx2x1 gen() 12316 MB/s
[ 7.964006] raid6: avx2x2 gen() 25769 MB/s
[ 7.981004] raid6: avx2x4 gen() 26167 MB/s
[ 7.981652] raid6: using algorithm avx2x4 gen() (26167 MB/s)
[ 7.982563] raid6: using avx2x2 recovery algorithm
[ 8.030498] device-mapper: uevent: version 1.0.3
[ 8.031315] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised:
dm-devel@redhat.com
[ 8.071169] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.131120] RPC: Registered named UNIX socket transport module.
[ 8.132043] RPC: Registered udp transport module.
[ 8.132788] RPC: Registered tcp transport module.
[ 8.133518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ 8.331290] vmap allocation for size 211106232541184 failed: use
vmalloc=<size> to increase size.
[ 8.332666] virtio-pci 0000:01:00.0: virtio_pci: unable to map virtio 56@0
on bar 4
[ 8.334166] virtio-pci: probe of 0000:01:00.0 failed with error -22
[ 8.335935] vmap allocation for size 211106232541184 failed: use
vmalloc=<size> to increase size.
[ 8.337319] virtio-pci 0000:03:00.0: virtio_pci: unable to map virtio 56@0
on bar 4
[ 8.338749] virtio-pci: probe of 0000:03:00.0 failed with error -22
[ 8.340555] vmap allocation for size 211106232541184 failed: use
vmalloc=<size> to increase size.
[ 8.341969] virtio-pci 0000:04:00.0: virtio_pci: unable to map virtio 56@0
on bar 4
[ 8.344927] virtio-pci: probe of 0000:04:00.0 failed with error -22
[ 8.347960] vmap allocation for size 211106232541184 failed: use
vmalloc=<size> to increase size.
[ 8.349335] virtio-pci 0000:05:00.0: virtio_pci: unable to map virtio 56@0
on bar 4
[ 8.350633] cryptd: max_cpu_qlen set to 1000
[ 8.350817] virtio-pci: probe of 0000:05:00.0 failed with error -22
[ 8.353053] vmap allocation for size 211106232541184 failed: use
vmalloc=<size> to increase size.
[ 8.353056] virtio-pci 0000:06:00.0: virtio_pci: unable to map virtio 56@0
on bar 4
[ 8.353196] virtio-pci: probe of 0000:06:00.0 failed with error -22
[ OK ] Started udev Coldplug all Devices.
Starting Device-Mapper Multipath Device Controller...
[ 8.369769] AVX2 version of gcm_enc/dec engaged.
[ 8.370515] AES CTR mode by8 optimization enabled
Starting Show Plymouth Boot Screen...
[ 8.382181] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 8.383372] alg: No test for __generic-gcm-aes-aesni
(__driver-generic-gcm-aes-aesni)
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Device-Mapper Multipath Device Controller.
Starting Open-iSCSI...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
[ 8.410333] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 8.412360] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f
impl SATA mode
[ 8.413706] ahci 0000:00:1f.2: flags: 64bit ncq only
[ 8.415665] scsi host0: ahci
[ 8.416253] scsi host1: ahci
[ 8.416774] scsi host2: ahci
[ 8.417468] scsi host3: ahci
[ 8.418082] scsi host4: ahci
[ 8.418608] scsi host5: ahci
[ 8.419125] ata1: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e100
irq 41
[ 8.420282] ata2: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e180
irq 41
[ 8.421433] ata3: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e200
irq 41
[ 8.422596] ata4: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e280
irq 41
[ 8.423750] ata5: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e300
irq 41
[ 8.424901] ata6: SATA max UDMA/133 abar m4096@0xfea0e000 port 0xfea0e380
irq 41
[ OK ] Started Open-iSCSI.
Starting dracut initqueue hook...
[ 8.731234] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.733017] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.733997] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.734981] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.735968] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.737121] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.738040] ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 8.738908] ata1.00: applying bridge limits
[ 8.739681] ata1.00: configured for UDMA/100
[ 8.740685] scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+
PQ: 0 ANSI: 5
[ 8.756158] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 8.757195] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.845628] dracut-initqueue[741]: mount: /dev/sr0 is write-protected,
mounting read-only
[ 8.904027] loop: module loaded
[ OK ] Started dracut initqueue hook.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting dracut pre-mount hook...
[ OK ] Started dracut pre-mount hook.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Started Reload Configuration from the Real Root.
Starting dracut mount hook...
[ OK ] Reached target Initrd File Systems.
[ 9.109434] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ OK ] Started dracut mount hook.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ OK ] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped dracut pre-pivot and cleanup hook.
Starting Plymouth switch root service...
[ OK ] Stopped target Timers.
[ OK ] Stopped target Initrd Default Target.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut mount hook.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Sockets.
[ OK ] Stopped target Paths.
[ OK ] Stopped target Slices.
[ OK ] Stopped dracut pre-mount hook.
[ OK ] Stopped dracut initqueue hook.
Stopping Open-iSCSI...
[ OK ] Closed Open-iSCSI iscsiuio Socket.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped target Local Encrypted Volumes.
[ OK ] Stopped target Swap.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped Open-iSCSI.
Stopping Device-Mapper Multipath Device Controller...
[ OK ] Started Cleaning Up and Shutting Down Daemons.
[ OK ] Stopped Device-Mapper Multipath Device Controller.
[ OK ] Stopped udev Coldplug all Devices.
[ OK ] Stopped dracut pre-trigger hook.
Stopping udev Kernel Device Manager...
[ OK ] Stopped udev Kernel Device Manager.
[ OK ] Started Plymouth switch root service.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of required sta...ce nodes for the current kernel.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Closed udev Kernel Socket.
[ OK ] Closed udev Control Socket.
Starting Cleanup udevd DB...
[ OK ] Started Cleanup udevd DB.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 9.383316] systemd-journald[88]: Received SIGTERM from PID 1 (systemd).
[ 9.767315] type=1403 audit(1699353533.808:2): policy loaded auid=4294967295
ses=4294967295
[ 9.780745] systemd[1]: Successfully loaded SELinux policy in 174.683ms.
[ 9.883861] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 22.749ms.
Welcome to CentOS Linux 7 (Core)!
[ 9.926789] random: crng init done
[ OK ] Stopped Switch Root.
[ OK ] Stopped Journal Service.
Starting Journal Service...
Starting Remount Root and Kernel File Systems...
[ OK ] Stopped target Switch Root.
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Created slice User and Session Slice.
Starting Availability of block devices...
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ OK ] Reached target Slices.
Starting Read and set NIS domainname from /etc/sysconfig/network...
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
Mounting Huge Pages File System...
Starting Create list of required st... nodes for the current kernel...
Mounting POSIX Message Queue File System...
[ OK ] Reached target Swap.
[ OK ] Listening on LVM2 metadata daemon socket.
Mounting Debug File System...
[ OK ] Reached target Paths.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Reached target Timers.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on udev Control Socket.
Mounting Temporary Directory...
[ OK ] Stopped target Initrd Root File System.
Starting Apply Kernel Variables...
[ OK ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice.
[ OK ] Created slice system-anaconda\x2dtmux.slice.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Availability of block devices.
[ OK ] Started Read and set NIS domainname from /etc/sysconfig/network.
Starting Configure read-only root support...
Starting Rebuild Hardware Database...
[ OK ] Mounted Temporary Directory.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Configure read-only root support.
Starting Load/Save Random Seed...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Load/Save Random Seed.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Rebuild Hardware Database.
Starting udev Coldplug all Devices...
[ OK ] Started udev Coldplug all Devices.
Starting Device-Mapper Multipath Device Controller...
Starting installer, one moment...
anaconda 21.48.22.159-1 for CentOS 7 started.
* installation log files are stored in /tmp during the installation
* shell is available on TTY2
* when reporting a bug add logs from /tmp as separate text/plain attachments
10:39:09 Not asking for VNC because we don't have a network
================================================================================
================================================================================
Installation
1) [x] Language settings 2) [!] Time settings
(English (United States)) (Timezone is not set.)
3) [!] Installation source 4) [!] Software selection
(Processing...) (Processing...)
5) [!] Installation Destination 6) [x] Kdump
(No disks selected) (Kdump is enabled)
7) [ ] Network configuration 8) [!] Root password
(No network devices available) (Password is not set.)
9) [!] User creation
(No user will be created)
Please make your choice from above ['q' to quit | 'b' to begin installation |
'r' to refresh]: 5
================================================================================
================================================================================
Probing storage...
Installation Destination
No disks detected. Please shut down the computer, connect at least one disk,
and restart to complete installation.