[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v11 for-4.0 09/11] qemu_thread: supplement error
From: |
Markus Armbruster |
Subject: |
Re: [Qemu-devel] [PATCH v11 for-4.0 09/11] qemu_thread: supplement error handling for migration |
Date: |
Fri, 01 Feb 2019 16:34:17 +0100 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/26.1 (gnu/linux) |
Dave, I tried to review the error paths, in particular resource cleanup,
but there's a lot going on, and I'm not feeling confident. Please have
a close look.
Fei Li <address@hidden> writes:
> From: Fei Li <address@hidden>
>
> Update qemu_thread_create()'s callers by
> - setting an error on qemu_thread_create() failure for callers that
> set an error on failure;
> - reporting the error and returning failure for callers that return
> an error code on failure;
> - reporting the error and setting some state for callers that just
> report errors and choose not to continue on.
>
> Besides, make compress_threads_save_cleanup() cope with partially
> initialized comp_param[i] to adapt to the new qemu_thread_create()
> failure case.
>
> Cc: Markus Armbruster <address@hidden>
> Cc: Dr. David Alan Gilbert <address@hidden>
> Signed-off-by: Fei Li <address@hidden>
> Reviewed-by: Dr. David Alan Gilbert <address@hidden>
> ---
> migration/migration.c | 35 +++++++++++++-------
> migration/postcopy-ram.c | 16 ++++++---
> migration/ram.c | 70 ++++++++++++++++++++++++++--------------
> migration/savevm.c | 12 ++++---
> 4 files changed, 89 insertions(+), 44 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 1da71211c8..0034ca1334 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -447,10 +447,13 @@ static void process_incoming_migration_co(void *opaque)
> goto fail;
> }
>
> - /* TODO: let the further caller handle the error instead of abort()
> */
> - qemu_thread_create(&mis->colo_incoming_thread, "COLO incoming",
> - colo_process_incoming_thread, mis,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&mis->colo_incoming_thread, "COLO incoming",
> + colo_process_incoming_thread, mis,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_reportf_err(local_err, "failed to create "
> + "colo_process_incoming_thread: ");
> + goto fail;
> + }
> mis->have_colo_incoming_thread = true;
> qemu_coroutine_yield();
>
> @@ -2349,6 +2352,7 @@ out:
> static int open_return_path_on_source(MigrationState *ms,
> bool create_thread)
> {
> + Error *local_err = NULL;
>
> ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file);
> if (!ms->rp_state.from_dst_file) {
> @@ -2362,10 +2366,15 @@ static int open_return_path_on_source(MigrationState
> *ms,
> return 0;
> }
>
> - /* TODO: let the further caller handle the error instead of abort() here
> */
> - qemu_thread_create(&ms->rp_state.rp_thread, "return path",
> - source_return_path_thread, ms,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&ms->rp_state.rp_thread, "return path",
> + source_return_path_thread, ms,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_reportf_err(local_err,
> + "failed to create source_return_path_thread: ");
> + qemu_fclose(ms->rp_state.from_dst_file);
> + ms->rp_state.from_dst_file = NULL;
> + return -1;
> + }
>
> trace_open_return_path_on_source_continue();
>
> @@ -3201,9 +3210,13 @@ void migrate_fd_connect(MigrationState *s, Error
> *error_in)
if (multifd_save_setup() != 0) {
migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
MIGRATION_STATUS_FAILED);
> migrate_fd_cleanup(s);
> return;
> }
> - /* TODO: let the further caller handle the error instead of abort() here
> */
> - qemu_thread_create(&s->thread, "live_migration", migration_thread, s,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&s->thread, "live_migration", migration_thread, s,
> + QEMU_THREAD_JOINABLE, &error_in) < 0) {
> + error_reportf_err(error_in, "failed to create migration_thread: ");
> + migrate_set_state(&s->state, s->state, MIGRATION_STATUS_FAILED);
> + migrate_fd_cleanup(s);
Is there anything to clean up for multifd_save_setup()? Dave?
> + return;
> + }
> s->migration_thread_running = true;
> }
>
> diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
> index 221ea24919..0934a1403a 100644
> --- a/migration/postcopy-ram.c
> +++ b/migration/postcopy-ram.c
> @@ -1083,6 +1083,8 @@ retry:
>
> int postcopy_ram_enable_notify(MigrationIncomingState *mis)
> {
> + Error *local_err = NULL;
> +
> /* Open the fd for the kernel to give us userfaults */
> mis->userfault_fd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
> if (mis->userfault_fd == -1) {
> @@ -1109,10 +1111,16 @@ int postcopy_ram_enable_notify(MigrationIncomingState
> *mis)
> }
>
> qemu_sem_init(&mis->fault_thread_sem, 0);
> - /* TODO: let the further caller handle the error instead of abort() here
> */
> - qemu_thread_create(&mis->fault_thread, "postcopy/fault",
> - postcopy_ram_fault_thread, mis,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&mis->fault_thread, "postcopy/fault",
> + postcopy_ram_fault_thread, mis,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_reportf_err(local_err,
> + "failed to create postcopy_ram_fault_thread: ");
> + close(mis->userfault_event_fd);
> + close(mis->userfault_fd);
> + qemu_sem_destroy(&mis->fault_thread_sem);
> + return -1;
> + }
> qemu_sem_wait(&mis->fault_thread_sem);
> qemu_sem_destroy(&mis->fault_thread_sem);
> mis->have_fault_thread = true;
/* Mark so that we get notified of accesses to unwritten areas */
if (qemu_ram_foreach_migratable_block(ram_block_enable_notify, mis)) {
error_report("ram_block_enable_notify failed");
return -1;
Not this patch's problem, but here goes anyway: where are
mis->userfault_event_fd and mis->userfault_fd closed?
}
> diff --git a/migration/ram.c b/migration/ram.c
> index 700ea229e0..66b8b764f1 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -441,6 +441,14 @@ static void compress_threads_save_cleanup(void)
>
> thread_count = migrate_compress_threads();
> for (i = 0; i < thread_count; i++) {
> + qemu_mutex_lock(&comp_param[i].mutex);
> + comp_param[i].quit = true;
> + qemu_cond_signal(&comp_param[i].cond);
> + qemu_mutex_unlock(&comp_param[i].mutex);
> +
> + qemu_mutex_destroy(&comp_param[i].mutex);
> + qemu_cond_destroy(&comp_param[i].cond);
> +
> /*
> * we use it as a indicator which shows if the thread is
> * properly init'd or not
> @@ -448,15 +456,7 @@ static void compress_threads_save_cleanup(void)
> if (!comp_param[i].file) {
> break;
> }
> -
> - qemu_mutex_lock(&comp_param[i].mutex);
> - comp_param[i].quit = true;
> - qemu_cond_signal(&comp_param[i].cond);
> - qemu_mutex_unlock(&comp_param[i].mutex);
> -
> qemu_thread_join(compress_threads + i);
> - qemu_mutex_destroy(&comp_param[i].mutex);
> - qemu_cond_destroy(&comp_param[i].cond);
> deflateEnd(&comp_param[i].stream);
> g_free(comp_param[i].originbuf);
> qemu_fclose(comp_param[i].file);
> @@ -473,6 +473,7 @@ static void compress_threads_save_cleanup(void)
> static int compress_threads_save_setup(void)
> {
> int i, thread_count;
> + Error *local_err = NULL;
>
> if (!migrate_use_compression()) {
> return 0;
> @@ -483,6 +484,9 @@ static int compress_threads_save_setup(void)
> qemu_cond_init(&comp_done_cond);
> qemu_mutex_init(&comp_done_lock);
> for (i = 0; i < thread_count; i++) {
> + qemu_mutex_init(&comp_param[i].mutex);
> + qemu_cond_init(&comp_param[i].cond);
> + comp_param[i].quit = false;
> comp_param[i].originbuf = g_try_malloc(TARGET_PAGE_SIZE);
> if (!comp_param[i].originbuf) {
> goto exit;
> @@ -499,13 +503,16 @@ static int compress_threads_save_setup(void)
> */
> comp_param[i].file = qemu_fopen_ops(NULL, &empty_ops);
> comp_param[i].done = true;
> - comp_param[i].quit = false;
> - qemu_mutex_init(&comp_param[i].mutex);
> - qemu_cond_init(&comp_param[i].cond);
> - /* TODO: let the further caller handle the error instead of abort()
> */
> - qemu_thread_create(compress_threads + i, "compress",
> - do_data_compress, comp_param + i,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(compress_threads + i, "compress",
> + do_data_compress, comp_param + i,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_reportf_err(local_err, "failed to create do_data_compress:
> ");
> + deflateEnd(&comp_param[i].stream);
> + g_free(comp_param[i].originbuf);
> + qemu_fclose(comp_param[i].file);
> + comp_param[i].file = NULL;
> + goto exit;
> + }
> }
> return 0;
>
> @@ -1076,9 +1083,14 @@ static void multifd_new_send_channel_async(QIOTask
> *task, gpointer opaque)
> p->c = QIO_CHANNEL(sioc);
> qio_channel_set_delay(p->c, false);
> p->running = true;
> - /* TODO: let the further caller handle the error instead of abort()
> */
> - qemu_thread_create(&p->thread, p->name, multifd_send_thread, p,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&p->thread, p->name, multifd_send_thread, p,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + migrate_set_error(migrate_get_current(), local_err);
> + error_reportf_err(local_err,
> + "failed to create multifd_send_thread: ");
> + multifd_save_cleanup();
> + return;
> + }
>
> atomic_inc(&multifd_send_state->count);
> }
> @@ -1357,9 +1369,13 @@ bool multifd_recv_new_channel(QIOChannel *ioc, Error
> **errp)
> p->num_packets = 1;
>
> p->running = true;
> - /* TODO: let the further caller handle the error instead of abort() here
> */
> - qemu_thread_create(&p->thread, p->name, multifd_recv_thread, p,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(&p->thread, p->name, multifd_recv_thread, p,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_propagate_prepend(errp, local_err,
> + "failed to create multifd_recv_thread: ");
This prepends only if @errp isn't null. Fine from the caller's point of
view. But it also affects multifd_recv_thread():
> + multifd_recv_terminate_threads(local_err);
That's at least unclean.
I think you should use error_prepend() and error_propagate() here.
> + return false;
> + }
> atomic_inc(&multifd_recv_state->count);
> return atomic_read(&multifd_recv_state->count) ==
> migrate_multifd_channels();
> @@ -3631,6 +3647,7 @@ static void compress_threads_load_cleanup(void)
> static int compress_threads_load_setup(QEMUFile *f)
> {
> int i, thread_count;
> + Error *local_err = NULL;
>
> if (!migrate_use_compression()) {
> return 0;
> @@ -3652,10 +3669,13 @@ static int compress_threads_load_setup(QEMUFile *f)
> qemu_cond_init(&decomp_param[i].cond);
> decomp_param[i].done = true;
> decomp_param[i].quit = false;
> - /* TODO: let the further caller handle the error instead of abort()
> */
> - qemu_thread_create(decompress_threads + i, "decompress",
> - do_data_decompress, decomp_param + i,
> - QEMU_THREAD_JOINABLE, &error_abort);
> + if (qemu_thread_create(decompress_threads + i, "decompress",
> + do_data_decompress, decomp_param + i,
> + QEMU_THREAD_JOINABLE, &local_err) < 0) {
> + error_reportf_err(local_err,
> + "failed to create do_data_decompress: ");
> + goto exit;
> + }
> }
> return 0;
> exit:
> diff --git a/migration/savevm.c b/migration/savevm.c
> index d5b45843b6..310cecbf8f 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1747,10 +1747,14 @@ static int
> loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
> mis->have_listen_thread = true;
> /* Start up the listening thread and wait for it to signal ready */
> qemu_sem_init(&mis->listen_thread_sem, 0);
> - /* TODO: let the further caller handle the error instead of abort() here
> */
> - qemu_thread_create(&mis->listen_thread, "postcopy/listen",
> - postcopy_ram_listen_thread, NULL,
> - QEMU_THREAD_DETACHED, &error_abort);
> + if (qemu_thread_create(&mis->listen_thread, "postcopy/listen",
> + postcopy_ram_listen_thread, NULL,
> + QEMU_THREAD_DETACHED, &local_err) < 0) {
> + error_reportf_err(local_err,
> + "failed to create postcopy_ram_listen_thread: ");
> + qemu_sem_destroy(&mis->listen_thread_sem);
> + return -1;
> + }
> qemu_sem_wait(&mis->listen_thread_sem);
> qemu_sem_destroy(&mis->listen_thread_sem);
- Re: [Qemu-devel] [PATCH v11 for-4.0 06/11] qemu_thread: supplement error handling for emulated_realize, (continued)
[Qemu-devel] [PATCH v11 for-4.0 05/11] qemu_thread: supplement error handling for h_resize_hpt_prepare, Fei Li, 2019/02/01
[Qemu-devel] [PATCH v11 for-4.0 08/11] qemu_thread: supplement error handling for qemu_signalfd_compat, Fei Li, 2019/02/01
[Qemu-devel] [PATCH v11 for-4.0 09/11] qemu_thread: supplement error handling for migration, Fei Li, 2019/02/01
[Qemu-devel] [PATCH v11 for-4.0 01/11] qemu_thread: make qemu_thread_create() take Error ** argument, Fei Li, 2019/02/01