[Qemu-block] [PATCH for-QEMU-4.1 v5 13/29] hw/arm: Express dependencies of xilinx-zynq with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the xilinx-zynq-a9 board.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <address@hidden>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 12 ++++++++++++
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index f39a854f2e..af78e7c892 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -19,6 +19,7 @@ CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
+CONFIG_ZYNQ=y
 CONFIG_MAINSTONE=y
 CONFIG_GUMSTIX=y
 CONFIG_SPITZ=y
@@ -38,16 +39,11 @@ CONFIG_VIRTIO_MMIO=y
 
 CONFIG_NETDUINO2=y
 
-CONFIG_PL330=y
-CONFIG_CADENCE=y
 CONFIG_FRAMEBUFFER=y
-CONFIG_XILINX_SPIPS=y
-CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_DIGIC=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
 CONFIG_STM32F2XX_USART=y
 CONFIG_STM32F2XX_SYSCFG=y
@@ -100,7 +96,6 @@ CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
-CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 101de74260..785e383411 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -201,6 +201,18 @@ config VEXPRESS
 
 config ZYNQ
     bool
+    select A9MPCORE
+    select CADENCE # UART
+    select PFLASH_CFI02
+    select PL330
+    select SDHCI
+    select SSI_M25P80
+    select USB_EHCI_SYSBUS
+    select XILINX # UART
+    select XILINX_AXI
+    select XILINX_SPI
+    select XILINX_SPIPS
+    select ZYNQ_DEVCFG
 
 config ARM_V7M
     bool
-- 
2.21.0