[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 17/41] Implement BCM2838 thermal sensor
From: |
Peter Maydell |
Subject: |
Re: [PATCH v5 17/41] Implement BCM2838 thermal sensor |
Date: |
Fri, 23 Feb 2024 16:53:57 +0000 |
On Mon, 19 Feb 2024 at 01:21, Sergey Kambalin <serg.oker@gmail.com> wrote:
>
> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
> ---
> hw/arm/bcm2838_peripherals.c | 27 ++++++--
> hw/arm/raspi4b.c | 1 -
> hw/misc/bcm2838_thermal.c | 98 ++++++++++++++++++++++++++++
> hw/misc/meson.build | 3 +-
> include/hw/arm/bcm2838_peripherals.h | 2 +
> include/hw/misc/bcm2838_thermal.h | 24 +++++++
> 6 files changed, 147 insertions(+), 8 deletions(-)
> create mode 100644 hw/misc/bcm2838_thermal.c
> create mode 100644 include/hw/misc/bcm2838_thermal.h
>
> diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
> index 6b4c840c5b..48c5fd5978 100644
> --- a/hw/arm/bcm2838_peripherals.c
> +++ b/hw/arm/bcm2838_peripherals.c
> @@ -37,6 +37,9 @@ static void bcm2838_peripherals_init(Object *obj)
> /* Random Number Generator */
> object_initialize_child(obj, "rng200", &s->rng200, TYPE_BCM2838_RNG200);
>
> + /* Thermal */
> + object_initialize_child(obj, "thermal", &s->thermal,
> TYPE_BCM2838_THERMAL);
> +
> /* PCIe Host Bridge */
> object_initialize_child(obj, "pcie-host", &s->pcie_host,
> TYPE_BCM2838_PCIE_HOST);
> @@ -78,6 +81,9 @@ static void bcm2838_peripherals_realize(DeviceState *dev,
> Error **errp)
> BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
> MemoryRegion *regs_mr;
> MemoryRegion *mmio_mr;
> + MemoryRegion *rng200_mr;
> + MemoryRegion *thermal_mr;
> + qemu_irq rng_200_irq;
>
> int n;
>
> @@ -95,12 +101,20 @@ static void bcm2838_peripherals_realize(DeviceState
> *dev, Error **errp)
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->rng200), errp)) {
> return;
> }
> - memory_region_add_subregion(
> - &s_base->peri_mr, RNG_OFFSET,
> - sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0));
> - sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0,
> - qdev_get_gpio_in_named(DEVICE(&s_base->ic), BCM2835_IC_GPU_IRQ,
> - INTERRUPT_RNG));
> + rng200_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng200), 0);
> + memory_region_add_subregion(&s_base->peri_mr, RNG_OFFSET, rng200_mr);
> +
> + rng_200_irq = qdev_get_gpio_in_named(DEVICE(&s_base->ic),
> + BCM2835_IC_GPU_IRQ, INTERRUPT_RNG);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng200), 0, rng_200_irq);
These are RNG200 related and look like they should be squashed into
the patch that added the RNG200 to the SoC.
> +
> +
> + /* THERMAL */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->thermal), errp)) {
> + return;
> + }
> + thermal_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->thermal), 0);
> + memory_region_add_subregion( &s->peri_low_mr, 0x15D2000, thermal_mr);
>
> /* Extended Mass Media Controller 2 */
> object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
> @@ -201,6 +215,7 @@ static void bcm2838_peripherals_realize(DeviceState *dev,
> Error **errp)
> BCM2838_MPHI_SIZE);
> memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
> &s->mphi_mr_alias);
> +
Stray whitespace change: should be in some other patch, I suspect
(maybe the one adding the pcie to the SoC?)
> /* PCIe Root Complex */
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->pcie_host), errp)) {
> return;
> diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> index 7c769fd2a4..8a8c5ce659 100644
> --- a/hw/misc/meson.build
> +++ b/hw/misc/meson.build
> @@ -91,7 +91,8 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files(
> 'bcm2835_thermal.c',
> 'bcm2835_cprman.c',
> 'bcm2835_powermgt.c',
> - 'bcm2838_rng200.c'
> + 'bcm2838_rng200.c',
> + 'bcm2838_thermal.c'
If you always keep a trailing comma on the end of this kind of list,
then you don't have to modify the preceding line when you add a new one.
> ))
> system_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
> system_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
Otherwise
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
- [PATCH v5 22/41] Add GENET register structs. Part 3, (continued)
- [PATCH v5 22/41] Add GENET register structs. Part 3, Sergey Kambalin, 2024/02/18
- [PATCH v5 14/41] Add BCM2838 PCIE host, Sergey Kambalin, 2024/02/18
- [PATCH v5 15/41] Enable BCM2838 PCIE, Sergey Kambalin, 2024/02/18
- [PATCH v5 21/41] Add GENET register structs. Part 2, Sergey Kambalin, 2024/02/18
- [PATCH v5 27/41] Implement GENET TX path, Sergey Kambalin, 2024/02/18
- [PATCH v5 28/41] Implement GENET RX path, Sergey Kambalin, 2024/02/18
- [PATCH v5 13/41] Add BCM2838 PCIE Root Complex, Sergey Kambalin, 2024/02/18
- [PATCH v5 16/41] Add RPi4 RNG200, Sergey Kambalin, 2024/02/18
- [PATCH v5 17/41] Implement BCM2838 thermal sensor, Sergey Kambalin, 2024/02/18
- Re: [PATCH v5 17/41] Implement BCM2838 thermal sensor,
Peter Maydell <=
- [PATCH v5 20/41] Add GENET register structs. Part 1, Sergey Kambalin, 2024/02/18
- [PATCH v5 26/41] Implement GENET MDIO, Sergey Kambalin, 2024/02/18
- [PATCH v5 39/41] Add missed BCM2835 properties, Sergey Kambalin, 2024/02/18
- [PATCH v5 19/41] Add GENET stub, Sergey Kambalin, 2024/02/18
- [PATCH v5 36/41] Add mailbox property tests. Part 1, Sergey Kambalin, 2024/02/18
- [PATCH v5 41/41] Add RPi4B to paspi.rst, Sergey Kambalin, 2024/02/18
- [PATCH v5 33/41] Add mailbox tests tags. Part 1, Sergey Kambalin, 2024/02/18
- [PATCH v5 31/41] Add mailbox test stub, Sergey Kambalin, 2024/02/18
- [PATCH v5 23/41] Add GENET register structs. Part 4, Sergey Kambalin, 2024/02/18