[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 0/1] hw/arm/aspeed: Allow machine to set UART default
From: |
pdel |
Subject: |
[PATCH v2 0/1] hw/arm/aspeed: Allow machine to set UART default |
Date: |
Wed, 1 Sep 2021 08:36:14 -0700 |
From: Peter Delevoryas <pdel@fb.com>
v1: https://lore.kernel.org/qemu-devel/20210831233140.2659116-1-pdel@fb.com/
v2:
- Replaced AspeedMachineClass "serial_hd0" with "uart_default"
- Removed "qdev_get_machine()" usage
- Removed unnecessary aspeed.h (machine class) includes in device files
- Added "uint32_t uart_default" to AspeedSoCState
- Added "uart-default" uint32 property to AspeedSoCState
- Set "uart-default" just before qdev_realize()
NOTE: Still not totally sure I did this right, especially because I only
initialized the properties in the aspeed_soc.c file (2400 + 2500), but
not aspeed_ast2600.c (2600), but I guess that's because
aspeed_soc_class_init is common to all the SoC's.
Peter Delevoryas (1):
hw/arm/aspeed: Allow machine to set UART default
hw/arm/aspeed.c | 3 +++
hw/arm/aspeed_ast2600.c | 8 ++++----
hw/arm/aspeed_soc.c | 9 ++++++---
include/hw/arm/aspeed.h | 1 +
include/hw/arm/aspeed_soc.h | 1 +
5 files changed, 15 insertions(+), 7 deletions(-)
Interdiff against v1:
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 74379907ff..a81e90c539 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -350,6 +350,8 @@ static void aspeed_machine_init(MachineState *machine)
object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key",
ASPEED_SCU_PROT_KEY, &error_abort);
}
+ qdev_prop_set_uint32(DEVICE(&bmc->soc), "uart-default",
+ amc->uart_default);
qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
memory_region_add_subregion(get_system_memory(),
@@ -804,7 +806,7 @@ static void aspeed_machine_class_init(ObjectClass *oc, void
*data)
mc->no_parallel = 1;
mc->default_ram_id = "ram";
amc->macs_mask = ASPEED_MAC0_ON;
- amc->serial_hd0 = ASPEED_DEV_UART5;
+ amc->uart_default = ASPEED_DEV_UART5;
aspeed_machine_class_props_init(oc);
}
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 361a456214..b07fcf10a0 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -10,7 +10,6 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/misc/unimp.h"
-#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/char/serial.h"
#include "qemu/module.h"
@@ -232,8 +231,6 @@ static uint64_t aspeed_calc_affinity(int cpu)
static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
{
int i;
- AspeedMachineState *bmc = ASPEED_MACHINE(qdev_get_machine());
- AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
AspeedSoCState *s = ASPEED_SOC(dev);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
Error *err = NULL;
@@ -325,9 +322,9 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev,
Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
- /* Wire up the first serial device, usually either UART5 or UART1 */
- serial_mm_init(get_system_memory(), sc->memmap[amc->serial_hd0], 2,
- aspeed_soc_get_irq(s, amc->serial_hd0), 38400,
+ /* UART - attach an 8250 to the IO space as our UART */
+ serial_mm_init(get_system_memory(), sc->memmap[s->uart_default], 2,
+ aspeed_soc_get_irq(s, s->uart_default), 38400,
serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index 77422bbeb1..09c0f83710 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -13,7 +13,6 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/misc/unimp.h"
-#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/char/serial.h"
#include "qemu/module.h"
@@ -222,8 +221,6 @@ static void aspeed_soc_init(Object *obj)
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
{
int i;
- AspeedMachineState *bmc = ASPEED_MACHINE(qdev_get_machine());
- AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
AspeedSoCState *s = ASPEED_SOC(dev);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
Error *err = NULL;
@@ -290,9 +287,9 @@ static void aspeed_soc_realize(DeviceState *dev, Error
**errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
- /* Wire up the first serial device, usually either UART5 or UART1 */
- serial_mm_init(get_system_memory(), sc->memmap[amc->serial_hd0], 2,
- aspeed_soc_get_irq(s, amc->serial_hd0), 38400,
+ /* UART - attach an 8250 to the IO space as our UART */
+ serial_mm_init(get_system_memory(), sc->memmap[s->uart_default], 2,
+ aspeed_soc_get_irq(s, s->uart_default), 38400,
serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
@@ -442,6 +439,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error
**errp)
static Property aspeed_soc_properties[] = {
DEFINE_PROP_LINK("dram", AspeedSoCState, dram_mr, TYPE_MEMORY_REGION,
MemoryRegion *),
+ DEFINE_PROP_UINT32("uart-default", AspeedSoCState, uart_default,
+ ASPEED_DEV_UART5),
DEFINE_PROP_END_OF_LIST(),
};
@@ -452,6 +451,7 @@ static void aspeed_soc_class_init(ObjectClass *oc, void
*data)
dc->realize = aspeed_soc_realize;
/* Reason: Uses serial_hds and nd_table in realize() directly */
dc->user_creatable = false;
+
device_class_set_props(dc, aspeed_soc_properties);
}
diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
index bc0f27885a..cbeacb214c 100644
--- a/include/hw/arm/aspeed.h
+++ b/include/hw/arm/aspeed.h
@@ -38,7 +38,7 @@ struct AspeedMachineClass {
uint32_t num_cs;
uint32_t macs_mask;
void (*i2c_init)(AspeedMachineState *bmc);
- uint32_t serial_hd0;
+ uint32_t uart_default;
};
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index d9161d26d6..87d76c9259 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -65,6 +65,7 @@ struct AspeedSoCState {
AspeedSDHCIState sdhci;
AspeedSDHCIState emmc;
AspeedLPCState lpc;
+ uint32_t uart_default;
};
#define TYPE_ASPEED_SOC "aspeed-soc"
--
2.30.2