[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH for-3.0 v2 5/5] hw/intc/arm_gicv3_common: Move gic
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-arm] [PATCH for-3.0 v2 5/5] hw/intc/arm_gicv3_common: Move gicd shift bug handling to gicv3_post_load |
Date: |
Mon, 6 Aug 2018 16:39:25 +0100 |
User-agent: |
Mutt/1.10.1 (2018-07-13) |
* Peter Maydell (address@hidden) wrote:
> The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
> that handles migration from older QEMU versions with a particular
> bug is misplaced. We need to run this after migration in all cases,
> not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
> subsection is present, so it must go in a post_load hook for the
> top level VMSD, not for the subsection. Move it.
>
> Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
> ---
> hw/intc/arm_gicv3_common.c | 77 ++++++++++++++++++--------------------
> 1 file changed, 37 insertions(+), 40 deletions(-)
>
> diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
> index 8175889f1e7..52480c3b4cf 100644
> --- a/hw/intc/arm_gicv3_common.c
> +++ b/hw/intc/arm_gicv3_common.c
> @@ -29,6 +29,41 @@
> #include "hw/arm/linux-boot-if.h"
> #include "sysemu/kvm.h"
>
> +
> +static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs)
> +{
> + if (cs->gicd_no_migration_shift_bug) {
> + return;
> + }
> +
> + /* Older versions of QEMU had a bug in the handling of state save/restore
> + * to the KVM GICv3: they got the offset in the bitmap arrays wrong,
> + * so that instead of the data for external interrupts 32 and up
> + * starting at bit position 32 in the bitmap, it started at bit
> + * position 64. If we're receiving data from a QEMU with that bug,
> + * we must move the data down into the right place.
> + */
> + memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8,
> + sizeof(cs->group) - GIC_INTERNAL / 8);
> + memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8,
> + sizeof(cs->grpmod) - GIC_INTERNAL / 8);
> + memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8,
> + sizeof(cs->enabled) - GIC_INTERNAL / 8);
> + memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8,
> + sizeof(cs->pending) - GIC_INTERNAL / 8);
> + memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8,
> + sizeof(cs->active) - GIC_INTERNAL / 8);
> + memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8,
> + sizeof(cs->edge_trigger) - GIC_INTERNAL / 8);
> +
> + /*
> + * While this new version QEMU doesn't have this kind of bug as we fix
> it,
> + * so it needs to set the flag to true to indicate that and it's
> necessary
> + * for next migration to work from this new version QEMU.
> + */
> + cs->gicd_no_migration_shift_bug = true;
> +}
> +
> static int gicv3_pre_save(void *opaque)
> {
> GICv3State *s = (GICv3State *)opaque;
> @@ -46,6 +81,8 @@ static int gicv3_post_load(void *opaque, int version_id)
> GICv3State *s = (GICv3State *)opaque;
> ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
>
> + gicv3_gicd_no_migration_shift_bug_post_load(s);
> +
> if (c->post_load) {
> c->post_load(s);
> }
> @@ -161,45 +198,6 @@ static int gicv3_pre_load(void *opaque)
> return 0;
> }
>
> -static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque,
> - int version_id)
> -{
> - GICv3State *cs = opaque;
> -
> - if (cs->gicd_no_migration_shift_bug) {
> - return 0;
> - }
> -
> - /* Older versions of QEMU had a bug in the handling of state save/restore
> - * to the KVM GICv3: they got the offset in the bitmap arrays wrong,
> - * so that instead of the data for external interrupts 32 and up
> - * starting at bit position 32 in the bitmap, it started at bit
> - * position 64. If we're receiving data from a QEMU with that bug,
> - * we must move the data down into the right place.
> - */
> - memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8,
> - sizeof(cs->group) - GIC_INTERNAL / 8);
> - memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8,
> - sizeof(cs->grpmod) - GIC_INTERNAL / 8);
> - memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8,
> - sizeof(cs->enabled) - GIC_INTERNAL / 8);
> - memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8,
> - sizeof(cs->pending) - GIC_INTERNAL / 8);
> - memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8,
> - sizeof(cs->active) - GIC_INTERNAL / 8);
> - memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8,
> - sizeof(cs->edge_trigger) - GIC_INTERNAL / 8);
> -
> - /*
> - * While this new version QEMU doesn't have this kind of bug as we fix
> it,
> - * so it needs to set the flag to true to indicate that and it's
> necessary
> - * for next migration to work from this new version QEMU.
> - */
> - cs->gicd_no_migration_shift_bug = true;
> -
> - return 0;
> -}
> -
> static bool needed_always(void *opaque)
> {
> return true;
> @@ -210,7 +208,6 @@ const VMStateDescription
> vmstate_gicv3_gicd_no_migration_shift_bug = {
> .version_id = 1,
> .minimum_version_id = 1,
> .needed = needed_always,
> - .post_load = gicv3_gicd_no_migration_shift_bug_post_load,
> .fields = (VMStateField[]) {
> VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State),
> VMSTATE_END_OF_LIST()
> --
> 2.17.1
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK