[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [Qemu-devel] [PATCH V2 1/2] arm64: Add an option to turn
From: |
Wei Huang |
Subject: |
Re: [Qemu-arm] [Qemu-devel] [PATCH V2 1/2] arm64: Add an option to turn on/off vPMU support |
Date: |
Wed, 14 Sep 2016 09:53:28 -0500 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.2.0 |
On 09/14/2016 03:17 AM, Andrew Jones wrote:
> On Wed, Sep 14, 2016 at 02:09:02AM -0400, Wei Huang wrote:
>> This patch adds a pmu=[on/off] option to enable/disable vPMU support
>> in guest VM. The pmu option is available only for cortex-a57/cortex-53/
>> host under both TCG and KVM modes. Additionally pmu can only be turned
>> on under KVM mode, otherwise a warning message will be printed out
>> (e.g. "-M virt,accel=tcg -cpu cortex-a57,pmu=on"). This property isn't
>
> The e.g. is a bit confusing here. Following the comment about a warning
> message makes me thing it should be an example of the warning message,
> but instead it's the command line parameters that generates a warning
> message. I'd just drop it.
>
>> available on ARMv7 and other processors. This patch has been tested under
>> DT and ACPI.
>
> The feature not being available everywhere is a key motivator for this
> series, and maybe should be written in the commit message. Right now
> the feature is only available on a57 and a53, but libvirt doesn't know
> that. With a property, libvirt can a) determine the feature doesn't
> exist, by the lack of property and b) enable/disable the feature. Also,
> by changing the default to 'off', libvirt can simply not emit a pmu=on,
> when no pmu is desired. This allows the feature-doesn't-exist and the
> feature-isn't-desired cases to be consistent.
I will update the commit message in V3, assuming that there are comments
from others.
>
>>
>> Signed-off-by: Wei Huang <address@hidden>
>> ---
>> hw/arm/virt-acpi-build.c | 2 +-
>> hw/arm/virt.c | 2 +-
>> target-arm/cpu.c | 22 ++++++++++++++++++++++
>> target-arm/cpu.h | 1 +
>> target-arm/cpu64.c | 2 ++
>> target-arm/kvm64.c | 17 +++++++++++++----
>> 6 files changed, 40 insertions(+), 6 deletions(-)
>>
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 295ec86..8b3083e 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -540,7 +540,7 @@ build_madt(GArray *table_data, BIOSLinker *linker,
>> VirtGuestInfo *guest_info)
>> gicc->uid = i;
>> gicc->flags = cpu_to_le32(ACPI_GICC_ENABLED);
>>
>> - if (armcpu->has_pmu) {
>> + if (arm_feature(&armcpu->env, ARM_FEATURE_PMU)) {
>> gicc->performance_interrupt = cpu_to_le32(PPI(VIRTUAL_PMU_IRQ));
>> }
>> }
>> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
>> index a193b5a..a781ad0 100644
>> --- a/hw/arm/virt.c
>> +++ b/hw/arm/virt.c
>> @@ -477,7 +477,7 @@ static void fdt_add_pmu_nodes(const VirtBoardInfo *vbi,
>> int gictype)
>>
>> CPU_FOREACH(cpu) {
>> armcpu = ARM_CPU(cpu);
>> - if (!armcpu->has_pmu ||
>> + if (!arm_feature(&armcpu->env, ARM_FEATURE_PMU) ||
>> !kvm_arm_pmu_create(cpu, PPI(VIRTUAL_PMU_IRQ))) {
>> return;
>> }
>> diff --git a/target-arm/cpu.c b/target-arm/cpu.c
>> index ce8b8f4..d304597 100644
>> --- a/target-arm/cpu.c
>> +++ b/target-arm/cpu.c
>> @@ -19,6 +19,7 @@
>> */
>>
>> #include "qemu/osdep.h"
>> +#include "qemu/error-report.h"
>> #include "qapi/error.h"
>> #include "cpu.h"
>> #include "internals.h"
>> @@ -509,6 +510,10 @@ static Property arm_cpu_rvbar_property =
>> static Property arm_cpu_has_el3_property =
>> DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true);
>>
>> +/* use property name "pmu" to match other archs and virt tools */
>> +static Property arm_cpu_has_pmu_property =
>> + DEFINE_PROP_BOOL("pmu", ARMCPU, has_pmu, false);
>> +
>> static Property arm_cpu_has_mpu_property =
>> DEFINE_PROP_BOOL("has-mpu", ARMCPU, has_mpu, true);
>>
>> @@ -552,6 +557,11 @@ static void arm_cpu_post_init(Object *obj)
>> #endif
>> }
>>
>> + if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) {
>> + qdev_property_add_static(DEVICE(obj), &arm_cpu_has_pmu_property,
>> + &error_abort);
>> + }
>> +
>> if (arm_feature(&cpu->env, ARM_FEATURE_MPU)) {
>> qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property,
>> &error_abort);
>> @@ -576,6 +586,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error
>> **errp)
>> ARMCPU *cpu = ARM_CPU(dev);
>> ARMCPUClass *acc = ARM_CPU_GET_CLASS(dev);
>> CPUARMState *env = &cpu->env;
>> + static bool pmu_warned;
>>
>> /* Some features automatically imply others: */
>> if (arm_feature(env, ARM_FEATURE_V8)) {
>> @@ -648,6 +659,17 @@ static void arm_cpu_realizefn(DeviceState *dev, Error
>> **errp)
>> cpu->id_aa64pfr0 &= ~0xf000;
>> }
>>
>> + if (cpu->has_pmu && !kvm_enabled()) {
>> + cpu->has_pmu = false;
>> + if (!pmu_warned) {
>> + error_report("warning: pmu can't be enabled without KVM
>> acceleration");
>> + pmu_warned = true;
>> + }
>> + }
>> + if (!cpu->has_pmu) {
>> + unset_feature(env, ARM_FEATURE_PMU);
>> + }
>> +
>> if (!arm_feature(env, ARM_FEATURE_EL2)) {
>> /* Disable the hypervisor feature bits in the processor feature
>> * registers if we don't have EL2. These are id_pfr1[15:12] and
>> diff --git a/target-arm/cpu.h b/target-arm/cpu.h
>> index 76d824d..5d9e6e7 100644
>> --- a/target-arm/cpu.h
>> +++ b/target-arm/cpu.h
>> @@ -1129,6 +1129,7 @@ enum arm_features {
>> ARM_FEATURE_V8_SHA256, /* implements SHA256 part of v8 Crypto
>> Extensions */
>> ARM_FEATURE_V8_PMULL, /* implements PMULL part of v8 Crypto Extensions
>> */
>> ARM_FEATURE_THUMB_DSP, /* DSP insns supported in the Thumb encodings */
>> + ARM_FEATURE_PMU, /* has PMU support */
>> };
>>
>> static inline int arm_feature(CPUARMState *env, int feature)
>> diff --git a/target-arm/cpu64.c b/target-arm/cpu64.c
>> index 1635deb..549cb1e 100644
>> --- a/target-arm/cpu64.c
>> +++ b/target-arm/cpu64.c
>> @@ -111,6 +111,7 @@ static void aarch64_a57_initfn(Object *obj)
>> set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
>> set_feature(&cpu->env, ARM_FEATURE_CRC);
>> set_feature(&cpu->env, ARM_FEATURE_EL3);
>> + set_feature(&cpu->env, ARM_FEATURE_PMU);
>> cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A57;
>> cpu->midr = 0x411fd070;
>> cpu->revidr = 0x00000000;
>> @@ -166,6 +167,7 @@ static void aarch64_a53_initfn(Object *obj)
>> set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
>> set_feature(&cpu->env, ARM_FEATURE_CRC);
>> set_feature(&cpu->env, ARM_FEATURE_EL3);
>> + set_feature(&cpu->env, ARM_FEATURE_PMU);
>> cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A53;
>> cpu->midr = 0x410fd034;
>> cpu->revidr = 0x00000000;
>> diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c
>> index 5faa76c..933b27a 100644
>> --- a/target-arm/kvm64.c
>> +++ b/target-arm/kvm64.c
>> @@ -428,6 +428,11 @@ static inline void set_feature(uint64_t *features, int
>> feature)
>> *features |= 1ULL << feature;
>> }
>>
>> +static inline void unset_feature(uint64_t *features, int feature)
>> +{
>> + *features &= ~(1ULL << feature);
>> +}
>> +
>> bool kvm_arm_get_host_cpu_features(ARMHostCPUClass *ahcc)
>> {
>> /* Identify the feature bits corresponding to the host CPU, and
>> @@ -469,6 +474,7 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUClass *ahcc)
>> set_feature(&features, ARM_FEATURE_VFP4);
>> set_feature(&features, ARM_FEATURE_NEON);
>> set_feature(&features, ARM_FEATURE_AARCH64);
>> + set_feature(&features, ARM_FEATURE_PMU);
>>
>> ahcc->features = features;
>>
>> @@ -482,6 +488,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
>> int ret;
>> uint64_t mpidr;
>> ARMCPU *cpu = ARM_CPU(cs);
>> + CPUARMState *env = &cpu->env;
>>
>> if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE ||
>> !object_dynamic_cast(OBJECT(cpu), TYPE_AARCH64_CPU)) {
>> @@ -501,10 +508,12 @@ int kvm_arch_init_vcpu(CPUState *cs)
>> if (!arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
>> cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_EL1_32BIT;
>> }
>> - if (kvm_irqchip_in_kernel() &&
>> - kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PMU_V3)) {
>> - cpu->has_pmu = true;
>> - cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_PMU_V3;
>> + /* enable PMU based on KVM mode, hw capability, and user setting */
>> + cpu->has_pmu &= kvm_irqchip_in_kernel() &&
>> + kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PMU_V3);
>> + cpu->kvm_init_features[0] |= cpu->has_pmu << KVM_ARM_VCPU_PMU_V3;
>> + if (!cpu->has_pmu) {
>> + unset_feature(&env->features, ARM_FEATURE_PMU);
>
> nit: I think I'd like the following more
>
> if (cpu->has_pmu) {
> cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_PMU_V3;
> } else {
> unset_feature(&env->features, ARM_FEATURE_PMU);
> }
Will correct it.
>
> but whatever.
>
>
>> }
>>
>> /* Do KVM_ARM_VCPU_INIT ioctl */
>> --
>> 1.8.3.1
>>
>>
>
> With some changes to the commit message
>
> Reviewed-by: Andrew Jones <address@hidden>
>