[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] ChibiOS v3 in Paparazzi
From: |
Prof. Dr.-Ing. Heinrich Warmers |
Subject: |
Re: [Paparazzi-devel] ChibiOS v3 in Paparazzi |
Date: |
Mon, 13 Jun 2016 12:52:24 +0200 |
User-agent: |
Mozilla/5.0 (Windows NT 5.0; rv:12.0) Gecko/20120428 Thunderbird/12.0.1 |
Dear Gautier Hattenberger,
tank you for the work.
Is there a way to run hardware debug support with ChibiOS and SWD with
the Linux OS ?
For the ChibiOS there exist a Eclipse development tool with
semihosting support but only for XP and Windows7.
regards,
Heinrich
Am 07.06.2016 16:38, schrieb Gautier Hattenberger:
Dear all,
We have just integrated in the latest master branch of Paparazzi a
proper support of the ChibiOS HAL and RT kernel v3.1.
Previously, we had an uncomfortable mix of ChibiOS and libopencm3
whose purpose was to log file on the SD card of the Apogee board.
Now, there is a proper implementation of the MCU drivers only using
ChibiOS HAL. At the moment, each driver runs in his own thread, while
the rest of the autopilot is running in a monolithic thread. This may
evolve in the future, but it is already possible to create payload
modules that start and run into dedicated threads for instance.
The previous functionalities, especially logging using the SDIO port
are of course preserved.
Only the Apogee board is supported, but this can be easily extended to
other STM32F4 boards (e.g. Lisa/MX) and probably STM32F1 boards as well.
For complete changes, see
https://github.com/paparazzi/paparazzi/pull/1699.
If you encounter any issues regarding this new architecture support,
please report to us.
Thanks to Felix and Michal for reviewing and initial implementation.
Happy Flights :)
Gautier Hattenberger for the Paparazzi Dev Team
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel