On Fri, Sep 28, 2012 at 4:09 PM, Christophe De Wagter
<
address@hidden> wrote:
> Unfortunately that guide is quite outdated. Several things still apply but
> not the makefile part.
>
> There is no more need for Makfile in your airframe. You can configure the
> autpilot using firmware, board and subsystems blocks.
>
> Look at:
http://paparazzi.enac.fr/wiki/Airframe_Configuration
>
> and in ./conf/airframes/examples for something that matches your hardware
>
> -Christophe
>
>
>
> On Thu, Sep 27, 2012 at 2:06 PM, iman shirdareh <
address@hidden>
> wrote:
>>
>> Hi
>>
>> I have some problem with airframe configuration, I'm following this
>> guid:
http://www.rcgroups.com/forums/showthread.php?t=1000937
>>
>> but I can't find funjet1.XML file and there isn't any
>>
>> <makefile>
>> CONFIG = \"tiny_2_1.h\"
>>
>>
>> in other example file, to change that?!
>>
>> I want to use my autopilot with Cessna 182 , Is there any similar airframe
>> file to use?
>>
>>
>>
>> Thanks a lot..........Iman
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>>
address@hidden
>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
>
address@hidden
>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel