CC
/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/arch/lpc21/uart_tunnel.o
arch/lpc21/uart_tunnel.c: In function `main':
arch/lpc21/uart_tunnel.c:49: error: `IOLED_3_BANKPIN'
undeclared (first use in this function)
arch/lpc21/uart_tunnel.c:49: error: (Each undeclared
identifier is reported only once
arch/lpc21/uart_tunnel.c:49: error: for each function
it appears in.)
arch/lpc21/uart_tunnel.c:49: error: `LED_3_PIN'
undeclared (first use in this function)
arch/lpc21/uart_tunnel.c:49: error: `IOLED_3_BANKCLR'
undeclared (first use in this function)
arch/lpc21/uart_tunnel.c:49: error: `IOLED_3_BANKSET'
undeclared (first use in this function)
make[1]: ***
[/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/arch/lpc21/uart_tunnel.o]
Error 1
make[1]: Leaving directory
`/home/dconger/paparazzi-software/sw/airborne'
make: *** [tunnel.compile] Error 2
make: Leaving directory
`/home/dconger/paparazzi-software'
On Sep 4, 2012, at 12:37 AM, Felix Ruess wrote:
Hi David,
you have to add the tunnel target to <firmware
name="setup"> and not fixedwing...
Cheers, Felix
On Tue, Sep 4, 2012 at 6:02
AM, David Conger
<address@hidden>
wrote:
Hello,
I prefer to program the GPS via the "tunnel"
application. Usually I just use an older code base
(paparazz3) and load the tunnel into a TWOG I have
here. Today I would like to use the UmarimLiteV2.
My airframe file is based on the "Weasel".
To get the tunnel to appear in Paparazzi Center I
added this line:
<target name="tunnel" board="umarim_1.0"/>
Now with "tunnel" as an option I go to "Clean".
Then get an error during the build. Here's the
Errror when doing "Build":
∫CC
/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/subsystems/navigation/nav_line.o
CC
/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/subsystems/gps.o
LD
/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/tunnel.elf
/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/crt0.o:
In function `abort':
arch/lpc21/crt0.S:(.init+0x138): undefined
reference to `main'
collect2: ld returned 1 exit status
make[1]: ***
[/home/dconger/paparazzi-software/var/MINIMAV2/tunnel/tunnel.elf]
Error 1
make[1]: Leaving directory
`/home/dconger/paparazzi-software/sw/airborne'
make: *** [tunnel.compile] Error 2
make: Leaving directory
`/home/dconger/paparazzi-software'
DONE (exec make -C
/home/dconger/paparazzi-software -f Makefile.ac
AIRCRAFT=MINIMAV2 tunnel.compile 2>&1)
What is this error?
arch/lpc21/crt0.S:(.init+0x138): undefined
reference to `main'
Is it my config or something in the code?
-David Conger
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel