On Sat, Aug 4, 2012 at 2:25 PM, Marvin Wang
<address@hidden> wrote:
hi Christophe
thank you ! i set the
<section name="DIGITAL_CAMERA" prefix="DC_">
in my airframe , and it works ! the gcs now shows the yellow dot .
i have a question about the led port.
<load name="digital_cam.xml">
<define name="DC_SHUTTER_LED" value="5"/>
<define name="LED_5_BANK" value="1"/>
<define name="LED_5_PIN" value="18"/>
<define name="PUSH" value="LED_ON" />
<define name="RELEASE" value="LED_OFF" />
<define name="DC_SHUTTER_DELAY" value="1" unit="quarter_second"/>
</load>
i use the lisa m 2.0 so i want to use the GPIO Port to trigger the DC
shutter. and i check the sch the GPIO has an digital IO , 53 pin of
the stm32 , so how to set the value of DC_SHUTTER_LED ?
thanks