[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] problem uploading to tiny v/2.11
From: |
Árni Þorvaldsson |
Subject: |
[Paparazzi-devel] problem uploading to tiny v/2.11 |
Date: |
Tue, 12 Jun 2012 14:20:13 +0000 |
Hi all, I am working with paparazzi on tiny v/2.11.
Currently I am having problem uploading. I am using
airframe: funjet_example
flight plan:basic
radio:cockpitSX
telemetry:default.xml
I plug USB and then power the board.
I get the error
no USB device
make[1]: *** [upload] Error 1
make[1]: Leaving directory `/home/mav/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/mav/paparazzi'
I also noticed that the red and yellow led lights on the board does not blink
when usb is connected and then the battery. It blinks if I connect it only to
the battery.
I was wondering if it's a hardware problem because it used to work before.
Kind regards Arni
- [Paparazzi-devel] problem uploading to tiny v/2.11,
Árni Þorvaldsson <=