[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Current Sensor
From: |
Romney, Jefferson S |
Subject: |
Re: [Paparazzi-devel] Current Sensor |
Date: |
Thu, 17 May 2012 02:23:24 +0000 |
Y
________________________________________
From: address@hidden address@hidden on behalf of Timo Drick address@hidden
Sent: Wednesday, May 16, 2012 6:04 PM
To: address@hidden
Subject: Re: [Paparazzi-devel] Current Sensor
Did you read the wiki? I think there is docu how to get current sensors
working:
http://paparazzi.enac.fr/wiki/Sensors/Current
regards
Timo
On 05/17/2012 12:25 AM, Romney, Jefferson S wrote:
> I got it to read one value off of the adc at startup, but it doesn't update.
> the value in adc_generic does update though. adding<define name="USE_ADC_6"
> doesn't seem to change anything.
> I use an Attopilot current sensor from sparkfun.com.
> ________________________________________
> From: address@hidden address@hidden on behalf of Eduardo lavratti
> address@hidden
> Sent: Wednesday, May 16, 2012 11:55 AM
> To: Paparazzi developer forum
> Subject: Re: [Paparazzi-devel] Current Sensor
>
> You need put
>
> USE_ADC_6 in your airframe file
>
> ________________________________
> From: address@hidden
> To: address@hidden
> Date: Wed, 16 May 2012 17:42:05 +0000
> Subject: Re: [Paparazzi-devel] Current Sensor
>
> Romney, i am very interested in put current sensor in my planes.
> What sensor you used ?
> may be i can help you with code and configurations
>
>> From: address@hidden
>> To: address@hidden
>> Date: Wed, 16 May 2012 17:34:55 +0000
>> Subject: [Paparazzi-devel] Current Sensor
>>
>> I just put a current sensor in my Plane with my Yapa, I can read it
>> correctly with the adc_generic module, but the current reading in the BAT or
>> Energy messages do not change. This is the part of my airframe file I have:
>>
>> <section name="BAT">
>> <define name="ADC_CHANNEL_CURRENT" value="ADC_6" />
>> <define name="MilliAmpereOfAdc(adc)" value="(36.6*adc)"/>
>> </section>
>>
>> Is there anything else I need to add to this to get it working?
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> _______________________________________________ Paparazzi-devel mailing list
> address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
- [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Eduardo lavratti, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Eduardo lavratti, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor, Timo Drick, 2012/05/16
- Re: [Paparazzi-devel] Current Sensor,
Romney, Jefferson S <=
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/16
Message not available
- Re: [Paparazzi-devel] Current Sensor, gatib, 2012/05/17
- Re: [Paparazzi-devel] Current Sensor, Romney, Jefferson S, 2012/05/18
- Re: [Paparazzi-devel] Current Sensor, Felix Ruess, 2012/05/18
- Re: [Paparazzi-devel] Current Sensor, Eduardo lavratti, 2012/05/18
- Re: [Paparazzi-devel] Current Sensor, Balazs GATI, 2012/05/21
- Re: [Paparazzi-devel] Current Sensor, Felix Ruess, 2012/05/21